SANSI 18W LED Motion Sensor Outdoor Flood Light User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your SANSI 18W LED Motion Sensor Outdoor Flood Light, Model C2440-GW. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Bezpečnostní informace

• Před instalací nebo servisem svítidla vždy vypněte napájení jističem.
• Pokud si nejste jisti postupem instalace, poraďte se s kvalifikovaným elektrikářem.
• Ujistěte se, že všechna elektrická připojení splňují místní předpisy a vyhlášky.
• Neinstalujte na povrchy, které jsou nestabilní nebo náchylné k vibracím.
• This product is designed for outdoor use and is IP65 waterproof.
• Do not look directly into the LED light source when illuminated, as it may cause eye strain.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1x SANSI 18W LED Security Light (White)
• 1x Installation Kit (screws, wire nuts)
• 1x Návod k použití

4. Vlastnosti produktu

The SANSI 18W LED Motion Sensor Outdoor Flood Light is designed for efficient and reliable outdoor illumination with advanced features:

• Úspora energie: 18 Watts, 1800 Lumens, equivalent to 200W traditional halogen lights, reducing electricity consumption by over 90%.
• Více režimů: AUTO (Motion Sensor), Dusk to Dawn, and On-Time modes for versatile control.
• Delší životnost: Utilizes SANSI's patented ceramic temperature control system for superior heat dissipation, extending product life to over 50,000 hours.
• Odolné a odolné vůči povětrnostním vlivům: Constructed with high-quality PC material, offering good anti-ultraviolet, flame-retardant, and anti-corrosion properties. IP65 waterproof rating ensures stable operation in various weather conditions.
• Nastavitelný design: Light heads and motion sensor are adjustable for optimal coverage and detection.

Image: Comparison of SANSI's ceramic heat dissipation technology with traditional designs.

Obrázek: Overview of key features including adjustability, sensing distance, brightness, and waterproof rating.

Obrázek: Přamples of the flood light installed in different outdoor environments.

5. Instalační příručka

Follow these steps for proper installation of your SANSI flood light:

1. Připravte se na instalaci: Turn off power at the circuit breaker. Ensure the mounting surface is secure and can support the fixture.
2. Upevněte montážní desku: Připevněte montážní desku k rozvodné krabici pomocí dodaných šroubů.
3. Připojte dráty: Connect the black (hot) wire, white (negative) wire, and green (ground) wire from the fixture to your household wiring using wire nuts. Ensure connections are tight and secure.
4. Montáž svítidla: Attach the LED light fixture to the mounting plate.
5. Choose the Working Mode: Select your desired operating mode (Auto, On-Time, D2D) using the switch on the motion sensor.

Image: Visual guide for the installation process.

6. Provozní režimy

The SANSI flood light offers three primary operating modes, selectable via a switch on the motion sensor:

• AUTO (Režim pohybového senzoru): The light turns on for 1-10 minutes at night when motion is detected. It stays off during the day.
• Režim od soumraku do úsvitu: Světlo se automaticky zapne za soumraku a vypne za úsvitu, čímž zajistí nepřetržité osvětlení po celou noc.
• Režim zapnuto: The light functions like a normal light, controlled manually by a wall switch. It stays on until manually turned off.
• Testovací mód: For verifying proper function during installation. The light turns on for 5 seconds during daytime or night once it detects motion.

Image: Visual representation of Auto and Dusk to Dawn operating modes.

Image: Close-up of the mode selection switch.

7. Úpravy

The motion sensor and light heads are adjustable to customize performance:

• Nastavení snímače pohybu: The sensor head can be adjusted 180° horizontally and 90° vertically to optimize detection area. Use the adjustment screws to loosen, position, and tighten.
• Nastavení hlavy světla: Each light head can be adjusted 180° horizontally and 90° vertically to direct illumination where needed. Loosen the screws, position the heads, and tighten securely.
• LUX (citlivost na jas): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards '0' for activation in darker conditions, towards 'infinity' for activation in brighter conditions. A halfway setting is often recommended.
• Čas: Sets the duration the light stays on after motion is detected, typically from 1 to 10 minutes.
• Rozsah: Adjusts the motion detection distance, up to a maximum of 72 feet.

Image: Motion sensor detection range and adjustment dials.

Obrázek: Podrobný view of the LUX, Time, and Range adjustment controls.

8. Údržba

To ensure optimal performance and longevity of your flood light:

• Čištění: Pravidelně čistěte zařízení měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Inspekce: Regularly check for any loose connections, damaged wiring, or signs of wear. Address any issues promptly.
• Plocha senzoru: Keep the motion sensor lens clear of obstructions (e.g., dirt, spiderwebs) to maintain accurate detection.

9. Řešení problémů

10. Specifikace

11. Záruka a podpora

SANSI poskytuje 5-letá záruka for this product, ensuring quality and safety. Additionally, a 30-day refund or replacement policy is available. For any issues or inquiries, please contact the professional customer service team via Amazon Message. Your satisfaction is our priority.

Pro další pomoc navštivte stránku Obchod SANSI na Amazonu.