Návod k obsluze pracovního světla Luceco LW50BG2-EU 50W LED

1. Úvod

This manual provides essential information for the safe and efficient operation of your Luceco LW50BG2-EU 50W LED Flat Work Light. Please read these instructions carefully before use and retain them for future reference. This work light is designed for professional and DIY use in various environments, including workshops and construction sites, offering powerful and energy-efficient illumination.

Figure 1: Luceco LW50BG2-EU 50W LED Flat Work Light. This image shows the work light from the front, with its main central light panel and two adjustable side panels illuminated, highlighting its compact and flat design.

2. Bezpečnostní pokyny

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

• Elektrická bezpečnost: Zajistěte napájení objtage matches the product's requirements (240 Volts). Do not operate the light with a damaged cord or plug. Avoid touching the plug or light with wet hands.
• Umístění: Position the work light on a stable, level surface. Ensure adequate ventilation around the unit to prevent overheating. Do not cover the light during operation.
• Venkovní použití: The light has an IP54 rating, making it suitable for outdoor use and protected against dust and splashing water. However, avoid submerging it in water or exposing it to heavy rain for extended periods.
• Ochrana očí: Do not stare directly into the LED light source when it is illuminated, as this can cause eye strain or damage.
• Údržba: Disconnect the power supply before cleaning or performing any maintenance. Refer to the maintenance section for detailed instructions.
• Děti a domácí mazlíčci: Keep the work light out of reach of children and pets.
• Teplo: While LED lights generate less heat than traditional halogen lights, the housing may still become warm during prolonged use. Allow it to cool before handling.

3. Obsah balení

Po vybalení ověřte, zda jsou všechny položky přítomny a v dobrém stavu.

• 1 x Luceco LW50BG2-EU 50W LED Flat Work Light
• Integrated 2m H05RN-F3G Rubber Cable
• Návod k použití (tento dokument)

4. Vlastnosti produktu

The Luceco LW50BG2-EU work light offers advanced features for versatile and efficient lighting:

• Vysoká energetická účinnost: Up to 90% energy saving compared to traditional halogen models.
• Výkonné osvětlení: Delivers 5000 lumens of bright, cool white light (6500K).
• Odolná konstrukce: Made from die-cast aluminum with a brushed aluminum finish, ensuring longevity.
• Ochrana IP54: Rated for protection against dust ingress and splashing water, suitable for various work environments.
• Nastavitelný design: Features a single inclinable foot and adjustable side panels for flexible light positioning.
• Pre-wired Cable: Comes with a 2-meter H05RN-F3G rubber cable for immediate use.
• Bezúdržbový provoz: Designed for reliability with minimal upkeep required.
• Montáž na stativ: Compatible with standard tripods for elevated lighting (tripod not included).

Figure 2: Product Dimensions and Adjustability. This diagram illustrates the overall dimensions of the work light (437mm width, 215mm height) and highlights the 180-degree rotation capability of the side LED panels.

5. Nastavení

1. Rozbalit: Carefully remove the work light from its packaging. Inspect for any signs of damage.
2. Umístění:
   • Volné stání: Place the work light on a flat, stable surface using its integrated inclinable foot. Adjust the angle of the main light and the side panels as needed to direct illumination.
   • Montáž na stativ: If using a tripod (not included), securely attach the work light to the tripod's mounting point. Ensure the tripod is stable before operation.
3. Připojení napájení: Uncoil the 2-meter power cable. Plug the power cord into a suitable 240V electrical outlet. Ensure the outlet is properly grounded.

Figure 3: Work Light in Use. This image demonstrates the work light positioned on a ladder, providing illumination for a work area, showcasing its versatility in placement.

6. Návod k obsluze

1. Zapnutí: Once connected to a power source, the work light will illuminate instantly. There is no separate power switch; connection to the mains activates the light.
2. Nastavení směru světla:
   • Hlavní panel: The main central light panel can be tilted using the integrated foot mechanism to adjust its vertical angle.
   • Boční panely: The two side LED panels can be rotated up to 180 degrees horizontally to broaden the light spread or focus it in specific directions.
3. Vypnout: To turn off the work light, simply unplug it from the electrical outlet.

7. Údržba

The Luceco LW50BG2-EU LED Flat Work Light is designed for maintenance-free operation. However, regular cleaning and proper storage will ensure its longevity.

• Čištění: Před čištěním odpojte napájení. Použijte měkký,amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Skladování: When not in use, store the work light in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cable is neatly coiled to prevent damage.
• Inspekce: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and have it repaired by a qualified technician.

8. Řešení problémů

9. Technické specifikace

Figure 4: Energy Label and Product Information Sheet. The image on the left displays the EU energy efficiency label for the Luceco LW50BG2-EU, indicating an 'F' rating and 50 kWh/1000h consumption. The image on the right shows a detailed product information sheet with various technical parameters.

Podrobnější informace o produktech naleznete v databázi EPREL: https://eprel.ec.europa.eu/qr/677572

10. Záruka a podpora

Luceco products are manufactured to high standards and are designed for durability. For warranty information, please refer to the terms and conditions provided at the point of purchase or on the official Luceco webmísto.

If you encounter any issues or require technical assistance, please contact Luceco customer support:

• E-mail: support@luceco.com
• Webmísto: www.luceco.com

Please have your model number (LW50BG2-EU) and purchase details ready when contacting support.