Timex Men's Dress Day-Date 41mm Watch

Zavedení

This manual provides instructions for the operation and care of your Timex Men's Dress Day-Date 41mm Watch, model TW2T50500JT. This timepiece features an analog-quartz movement, a silver-tone dial with partial Roman numerals, and a day and date window. The watch is equipped with a two-tone stainless steel bracelet and is water resistant to 30 meters (100 feet).

Nastavení

Nastavení času

1. Najděte korunku na pravé straně pouzdra hodinek.
2. Gently pull the crown out to position 2 (the outermost position). The watch hands will stop moving.
3. Rotate the crown clockwise or counter-clockwise to set the desired time. Ensure that AM/PM is correctly set, especially when setting the date.
4. Once the time is set, push the crown back into position 0 (the innermost position) to restart the watch.

Nastavení dne a data

1. Pull the crown out to position 1 (the intermediate position).
2. Otáčením korunky ve směru hodinových ručiček nastavte datum.
3. Otáčením korunky proti směru hodinových ručiček nastavte den.
4. Avoid setting the date or day between 9:00 PM and 3:00 AM, as this is when the watch's internal mechanism is engaged in changing the date, and manual adjustment can cause damage. If you need to set the date during these hours, first set the time outside this range, adjust the date, then reset the time.
5. Jakmile je den a datum nastaveno, zatlačte korunku zpět do polohy 0.

Ovládání hodinek

Your Timex watch is powered by an analog-quartz movement, which provides accurate timekeeping. Once the time, day, and date are set, the watch will operate continuously as long as the battery has power. The day and date will automatically advance at midnight. If the watch is not worn for an extended period, it may require resetting the time and date when put back into use.

Údržba

Voděodolnost

This watch is water resistant to 30 meters (100 feet). This means it is suitable for splashes or brief immersion in water. It is ne suitable for swimming, bathing, showering, or diving. Always ensure the crown is fully pushed in to maintain water resistance. Do not operate the crown while the watch is wet.

Čištění

To clean your watch, gently wipe the case and bracelet with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the finish. For the stainless steel bracelet, a soft brush can be used to remove dirt from between the links.

Výměna baterie

The watch is powered by a product-specific battery (included). When the battery needs replacement, it is recommended to have it replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Odstraňování problémů

• Hodinky neběží: Ensure the crown is fully pushed into position 0. If the watch still does not run, the battery may need replacement.
• Date or Day not changing: Verify that the time is set correctly, especially the AM/PM cycle. The day and date typically advance around midnight. If the issue persists, ensure the crown is fully pushed in after setting.
• Nepřesné měření času: While quartz movements are highly accurate, significant deviations may indicate a low battery or a need for servicing.

Specifikace

Záruka a podpora

Your Timex watch is covered by a manufacturer's warranty. For specific details regarding the warranty period and coverage, please refer to the warranty information provided with your purchase or contact Timex customer service directly. For technical support or service inquiries, please visit the official Timex webnebo kontaktujte jejich oddělení zákaznických služeb.

You can request warranty information from customer service. For assistance, please visit the Timex official webmísto.