1. Úvod
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your CLY 10W LED Motion Sensor Floodlight. Designed for outdoor use, this floodlight offers bright, energy-efficient illumination with intelligent motion detection capabilities.
2. Bezpečnostní pokyny
- Always disconnect power before attempting any installation, maintenance, or repair.
- Zajistěte správné uzemnění, abyste zabránili úrazu elektrickým proudem.
- Pokud si nejste jisti elektrickým zapojením, měl by instalaci provést kvalifikovaný elektrikář.
- Nedívejte se přímo do LED světelného zdroje, když je rozsvícený, mohlo by to způsobit namáhání očí nebo jejich poškození.
- The product is rated IP66 for outdoor use, meaning it is protected against dust and powerful water jets. However, avoid submerging the unit in water.
- Během instalace a provozu držte děti v dostatečné vzdálenosti od výrobku.
3. Obsah balení
Zkontrolujte prosím balení, zda jsou přítomny všechny komponenty:
- 1 x CLY 10W LED Motion Sensor Floodlight
- 1 x Set of Mounting Screws and Accessories
- 1 x Uživatelská příručka
4. Vlastnosti produktu
- Vysoký jas: 10W LED with 850 lumens output.
- Teplota barev: 6500K studené bílé světlo.
- Pohybový senzor: 180° sensing angle with a detection distance of up to 12 meters (39 feet).
- Nastavitelná nastavení: Customizable lighting duration (10s, 45s, 120s, 600s) and operating mode (24 hours / night only).
- Odolný design: IP66 waterproof and dustproof rating, suitable for various outdoor weather conditions.
- Efektivní odvod tepla: Robust aluminum alloy housing ensures optimal heat management and extended lifespan.
- Široký úhel paprsku: 120° beam angle for broad illumination.
5. Nastavení a instalace
Pro správnou instalaci postupujte podle následujících kroků:
- Vyberte místo montáže: Select a suitable outdoor location, ideally at a height of 2.5 to 3.5 meters (8.20 to 11.48 feet) for optimal motion detection and light coverage. Ensure the area is clear of obstructions that might block the sensor's view.
- Označte otvory pro vrtání: Use the floodlight's bracket as a template to mark the positions for drilling on the mounting surface.
- Vrtací otvory: Drill holes at the marked positions. Insert wall plugs if necessary for secure mounting.
- Namontujte držák: Secure the floodlight's bracket to the mounting surface using the provided screws.
- Zapojení: Connect the floodlight's electrical wires to your main power supply. Ensure correct connections for Live (L), Neutral (N), and Ground (GND). Always consult local electrical codes and ensure power is off during wiring.
- Upravit úhel: Once mounted, adjust the angle of the floodlight and the motion sensor to cover the desired area. The sensor has a 180° sensing angle and can be rotated for optimal coverage.

Figure 5.1: Ideal mounting height (2.5-3.5m) and maximum detection range (12m).

Figure 5.2: The adjustable bracket allows for flexible horizontal and vertical mounting.
6. Návod k obsluze
The CLY LED Motion Sensor Floodlight features adjustable settings for its PIR sensor:
6.1. Lighting Time Setting (TIME)
This knob controls how long the light stays on after motion is detected. Rotate the knob to select the desired duration:
- 10S: Light stays on for approximately 10 seconds.
- 45S: Light stays on for approximately 45 seconds.
- 120S: Light stays on for approximately 120 seconds (2 minutes).
- 600S: Light stays on for approximately 600 seconds (10 minutes).
6.2. Operating Mode Setting (LUX)
This knob determines when the motion sensor will activate the light. Rotate the knob to choose between:
- Sun Icon (24 hours): The sensor will detect motion and activate the light both during the day and at night.
- Moon Icon (Night Only): The sensor will only detect motion and activate the light when ambient light levels are low (i.e., at night).

Obrázek 6.1: Detailní view of the TIME and LUX adjustment knobs on the motion sensor.
7. Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho světlometu:
- Čištění: Periodically wipe the floodlight and sensor lens with a soft, damp hadříkem odstraňte prach a nečistoty. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Inspekce: Regularly check for any signs of damage to the housing, wiring, or mounting bracket. Ensure all connections are secure.
- Ochrana proti počasí: While the unit is IP66 rated, ensuring proper drainage around the installation area can further protect it from prolonged exposure to standing water.
8. Řešení problémů
If you encounter issues with your CLY LED Motion Sensor Floodlight, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Žádné napájení. LUX setting is incorrect. Sensor is blocked. | Zkontrolujte připojení napájení a jistič. Adjust LUX knob to 'Sun' icon for 24-hour detection or ensure it's dark enough for 'Moon' icon setting. Odstraňte všechny překážky z dosahu senzoru view. |
| Světlo svítí nepřetržitě. | Nastavení ČASU je příliš dlouhé. Detekován nepřetržitý pohyb. Chyba zapojení. | Nastavte knoflík TIME na kratší dobu. Ensure no constant motion is within the sensor's range. Ověřte správnost zapojení vodičů. |
| Světlo bliká nebo mihotá. | Nestabilní napájení. Uvolněné připojení kabeláže. | Zkontrolujte stabilitu napájecího zdroje. Zkontrolujte a zajistěte všechna kabelová spojení. |
| Pohybový senzor nedetekuje. | Nesprávný úhel senzoru. Detection distance too far. Rušení teploty. | Adjust the sensor head to cover the desired area. Ensure objects are within the 12-meter detection range. Extreme temperatures can affect sensor performance. |
If the problem persists after attempting these solutions, please contact CLY customer service for further assistance.
9. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | FLB010 |
| Moc | 10W |
| Světelný tok | 850 XNUMX lumenů |
| Teplota barev | 6500K (studená bílá) |
| Hodnocení IP | IP66 |
| Úhel snímání | 180° |
| Detekční vzdálenost | Až 12 metrů (39 stop) |
| Lighting Time Settings | 10s, 45s, 120s, 600s |
| Operating Mode Settings | Day & Night / Night Only |
| Materiál | Hliník |
| Rozměry produktu (D x Š x V) | 11.9 x 3 x 15 cm |
| Hmotnost produktu | 430 gramů |
| Zdroj napájení | Elektrický kabel |
| Montáž Vyžadována | Ano |
| Jsou vyžadovány baterie | Žádný |

Obrázek 9.1: Rozměry produktu (119 mm x 150 mm x 30 mm).
10. Záruka a zákaznická podpora
CLY offers a Roční výměnná služba pro tento produkt.
If you encounter any issues or have questions regarding your CLY 10W LED Motion Sensor Floodlight, please do not hesitate to contact our customer service team. You can reach us via Amazon or through the service email provided in the product packaging. We aim to respond to all inquiries within 24 hours and are always ready to assist you.