Schellenberg 70988 Basic Window Mosquito Screen 120 x 140 cm Instruction Manual

Zavedení

This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.

Bezpečnostní pokyny

• Always read and understand all instructions before beginning assembly or installation.
• Use appropriate safety gear, such as gloves, when handling tools and materials.
• Uchovávejte malé součástky mimo dosah dětí, abyste předešli nebezpečí udušení.
• Zajistěte, aby byl pracovní prostor čistý a dobře osvětlený.
• Neupravujte výrobek žádným způsobem, který není popsán v této příručce.

Obsah balení

Zkontrolujte prosím, zda jsou v balení přítomny všechny níže uvedené komponenty:

• 4 x Aluminum profiles for the clamping rámu
• 1 x Fiberglass mosquito net fabric
• 4 x Corner connectors
• 4 x Corner connection caps
• 4 x Stainless steel suspension springs
• 2 x Piping handles
• 4 x Piping beads
• 1 x Brush seal
• 1 x Návod k sestavení

Nastavení a montáž

Follow these steps to assemble and install your window mosquito screen:

1. Připravte si profesionálafiles: Připojte hliníkový profesionálfiles using the corner connectors to form the frame. Ensure they are securely fitted.
2. Instalace mřížky: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
3. Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
4. Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
5. Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.

Návod k obsluze

Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.

Údržba

• Čištění síťoviny: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
• Čištění rámu: Otřete hliníkový rám reklamouamp tkanina.
• Skladování: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případné reklamace.

Kontaktní údaje:

• Výrobce: Schellenberg
• Webmísto: www.schellenberg.de (Please check for local country-specific webstránky)