Uživatelská příručka k alarmu výpadku napájení Bewinner (model Bewinner1iv0ts4hg5)

1. Úvod

Thank you for choosing the Bewinner Power Failure Alarm. This device is designed to alert you immediately in the event of a power outage or failure, ensuring you are aware of any interruptions to your electrical supply. Its loud siren and LED indicator provide clear warnings, making it ideal for monitoring critical appliances or areas where continuous power is essential.

2. Bezpečnostní informace

• svtage Kompatibilita: This alarm is designed for 220V power systems. Ensure your power outlet matches this voltage to prevent damage to the device or electrical hazards.
• Instalace baterie: Always install the 9V battery with correct polarity (+/-). Incorrect installation can damage the device.
• Pouze pro vnitřní použití: This device is intended for indoor use in dry environments. Do not expose it to water, moisture, or extreme temperatures.
• Uchovávejte mimo dosah dětí: The alarm produces a loud sound which may be harmful to young children's hearing if they are too close.
• Údržba: Do not attempt to open or repair the device yourself. Refer to qualified personnel for any servicing needs.
• Likvidace: Baterie a zařízení zlikvidujte v souladu s místními předpisy.

3. Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• Bewinner Power Failure Alarm Unit (1)
• Uživatelský manuál (1)

Note: A 9V battery is required for operation and is není součástí dodávky v balíčku.

4. Konec produktuview

Familiarize yourself with the components of your Bewinner Power Failure Alarm:

• Siréna: Emits a loud audible alarm during a power failure.
• LED indikátor: A small light that indicates the power status.
• Napájecí zástrčka: Integrated plug for connecting to a 220V power outlet.
• Přepínač ON/OFF: Located on the side, this switch manually mutes or activates the alarm.
• Přihrádka na baterie: Located at the bottom, accessible via a drawer-type cover for 9V battery installation.

5. Nastavení

5.1. Instalace baterie

1. Locate the drawer-type battery cover on the bottom of the alarm unit (refer to Figure 4.3).
2. Posunutím otevřete kryt baterie.
3. Insert a new 9V battery, ensuring the correct polarity (+ and - terminals match the markings inside the compartment).
4. Pevně ​​zavřete kryt baterie.

5.2. Připojování k napájení

1. Ensure the ON/OFF switch on the side of the alarm is in the "OFF" position to prevent immediate alarming.
2. Plug the alarm's integrated power plug directly into a standard 220V CN power outlet.
3. Note: While the product is specified for 220V CN plugs, some models or regional versions may feature different plug types (e.g., US standard). Always verify the plug type and voltage compatibility with your local electrical system before plugging in. An adapter or converter may be required for international use.

6. Návod k obsluze

6.1. Aktivace alarmu

1. After installing the battery and plugging the unit into a live power outlet, slide the ON/OFF switch to the "ON" position.
2. The LED indicator should light up, signifying that the alarm is active and monitoring the power supply.

6.2. Power Failure Detection

When the power supply to the outlet is interrupted (e.g., due to a power outage, tripped breaker, or accidental unplugging), the alarm will immediately sound a loud siren (approximately 120dB) and the LED indicator may flash or change state, depending on the specific model.

6.3. Muting the Alarm

To silence the alarm after a power failure, simply slide the ON/OFF switch to the "OFF" position. The alarm will cease sounding. Once power is restored, you can slide the switch back to "ON" to reactivate monitoring.

7. Údržba

7.1. Výměna baterie

The 9V battery provides backup power for the alarm function during an outage. It is recommended to replace the battery annually or if you notice the alarm's volume decreasing during tests. To replace:

1. Unplug the alarm from the power outlet.
2. Slide the ON/OFF switch to the "OFF" position.
3. Open the battery compartment (refer to Section 5.1).
4. Remove the old 9V battery and insert a new one, observing correct polarity.
5. Close the battery compartment, plug the alarm back in, and switch it to "ON".

7.2. Čištění

Wipe the exterior of the alarm with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

For warranty information, technical support, or customer service inquiries, please refer to the product packaging or contact the manufacturer directly through their official webnebo prodejce, u kterého byl produkt zakoupen. Uschovejte si účtenku jako doklad o koupi.