Uživatelská příručka k ocelovému zvedáku Daytona 3 Ton Heavy Duty

Zavedení

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Daytona 3 Ton Steel Heavy Duty Floor Jack. Please read and understand all instructions before using this product. Proper use and maintenance will ensure optimal performance and extend the lifespan of your floor jack.

The Daytona 3 Ton Steel Heavy Duty Floor Jack is designed for lifting vehicles with a maximum capacity of 3 tons. It features a dual piston Rapid Pump technology for quick lifting and a lift height range of 5 inches to 18-1/4 inches, suitable for various vehicle types from low-profile cars to trucks and SUVs.

Bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto pokynů může mít za následek vážné zranění nebo poškození majetku.

• Always wear ANSI-approved safety goggles during setup and use.
• Do not exceed the rated capacity of 3 tons.
• Používejte pouze na tvrdém, rovném povrchu.
• Ensure the vehicle is stable and cannot roll before lifting. Engage parking brake and block wheels.
• Lift only on vehicle frame or designated lift points as specified by the vehicle manufacturer.
• After lifting, always support the vehicle with appropriate jack stands before working underneath. Do not rely solely on the floor jack for support.
• Udržujte ruce a nohy v dostatečné vzdálenosti od pohyblivých částí.
• Do not modify the jack or use it for purposes other than lifting vehicles.
• Inspect the jack before each use for any damage or leaks. Do not use if damaged.
• Lower the vehicle slowly and carefully.

Komponenty produktu

Image: The Daytona 3 Ton Steel Heavy Duty Floor Jack in its orange finish, showcasing its robust construction and low-profile design. This image provides an overall view produktu.

• Lift Arm: The main lifting component that raises the saddle.
• Sedlo: The rotating, removable pad that contacts the vehicle's lift point.
• Zacházet s: Used for pumping and maneuvering the jack.
• Vypouštěcí ventil: Řídí rychlost spouštění zvedáku.
• Hydraulický válec: Contains the hydraulic fluid and piston mechanism.
• Kolečka: Front and rear wheels for mobility, with ball bearing premium rear swivel casters for 360° mobility.

Nastavení

1. Rozbalení: Carefully remove the floor jack from its packaging. Inspect for any shipping damage.
2. Sestava rukojeti: Insert the handle into the handle socket. Secure it according to the instructions provided in the packaging (typically with a set screw or pin).
3. Purging Air from Hydraulic System:
   • Turn the release valve counter-clockwise to open it.
   • Rychle pumpujte rukojetí 10–15krát bez zátěže.
   • Otočením vypouštěcího ventilu ve směru hodinových ručiček jej zavřete.
   • The jack should now operate smoothly. If not, repeat the purging process.

Obrázek: Pohled zhora view of the Daytona 3 Ton Floor Jack, highlighting the handle connection point and the main body of the jack. This perspective is useful for understanding handle assembly.

Návod k obsluze

1. Příprava:
   • Zaparkujte vozidlo na tvrdém a rovném povrchu.
   • Engage the parking brake and place wheel chocks on the wheels that will remain on the ground.
   • Správné body pro zvedání naleznete v návodu k obsluze vašeho vozidla.
2. Zvedání vozidla:
   • Position the jack's saddle directly under the vehicle's designated lifting point.
   • Ujistěte se, že je vypouštěcí ventil zcela uzavřen otočením ve směru hodinových ručiček.
   • Pump the handle to raise the jack. The dual piston Rapid Pump technology will quickly lift the vehicle.
   • Lift the vehicle only high enough to place jack stands.
3. Zajištění vozidla:
   • Once the vehicle is at the desired height, place appropriately rated jack stands under the vehicle's frame or designated support points.
   • Slowly open the release valve by turning it counter-clockwise to lower the vehicle onto the jack stands.
   • Ensure the vehicle is securely resting on the jack stands before performing any work.
   • Leave the floor jack in place as an additional safety measure, but do not rely on it as the sole support.
4. Spouštění vozidla:
   • Raise the vehicle slightly off the jack stands using the floor jack.
   • Demontujte stojany zvedáku.
   • Slowly turn the release valve counter-clockwise to lower the vehicle to the ground. Control the lowering speed carefully.
   • Once the vehicle is fully lowered, remove the floor jack.

Image: The Daytona 3 Ton Floor Jack positioned under the frame of a vehicle, demonstrating its use for lifting. This image illustrates the jack in an operational context.

Údržba

• Mazání: Periodically lubricate all moving parts with light machine oil.
• Hydraulická kapalina: Check the hydraulic fluid level every three months. To check, lower the jack completely, remove the oil filler plug, and ensure the fluid is level with the bottom of the filler hole. Use only high-quality hydraulic jack oil. Do not use brake fluid or motor oil.
• Čištění: Keep the jack clean and free of dirt, grease, and corrosive materials.
• Skladování: Zvedák skladujte na suchém a čistém místě s plně zasunutým pístem.
• Inspekce: Before each use, inspect the jack for any signs of damage, wear, or leaks. Pay close attention to welds, casters, and the hydraulic cylinder.

Odstraňování problémů

Specifikace

• Číslo modelu: MX64200
• Kapacita zatížení: 3 tun (6,000 XNUMX liber)
• Minimum Lift Height: 5 palců
• Maximální výška zdvihu: 18-1/4 palce
• Barva: Pomerančový
• Hydraulický systém: Dual Piston Rapid Pump
• Kolečka: Ball bearing premium rear swivel casters
• Sedlo: Rotating, removable
• UPC: 792363642002

Obrázek: Strana view of the Daytona 3 Ton Floor Jack, illustrating its low-profile design and the mechanism for lifting. This view helps in understanding the jack's dimensions and operational parts.

Záruka a podpora

For warranty information or technical support regarding your Daytona 3 Ton Steel Heavy Duty Floor Jack, please refer to the warranty card included with your purchase or contact Daytona customer service. Keep your purchase receipt for warranty claims.

For further assistance, please visit the official Daytona website or contact their customer support line. Contact details are typically found in the product packaging or on the manufacturer's webmísto.