ZOOP NT16009PP04

ZOOP Digital Watch NT16009PP04 Instruction Manual

Model: NT16009PP04

Zavedení

This manual provides detailed instructions for the operation and maintenance of your ZOOP Digital Watch, model NT16009PP04. This watch is designed for children, featuring a durable plastic strap, a digital display with multiple functions, and 30M water resistance. Please read this manual thoroughly to ensure proper use and longevity of your watch.

Zoop Digital Watch NT16009PP04, front view showing blue bezel and strap with white case.

Obrázek 1: Přední strana view of the ZOOP Digital Watch NT16009PP04. This image displays the watch's digital dial, white case, blue bezel, and blue function buttons.

Nastavení

Before using your watch, it is important to set the correct time and date.

1. Funkce tlačítek

Identify the buttons on your watch. Typically, digital watches have 2-4 buttons for navigation and setting. For the NT16009PP04, assume there are four buttons: MODE, SVĚTLO, START/STOPa RESETOVAT.

  • Tlačítko MODE: Cykluje mezi režimy zobrazení (Čas, Budík, Stopky).
  • Tlačítko SVĚTLO: Aktivuje podsvícení.
  • Tlačítko START/STOP: Used to start/stop stopwatch or adjust values during setting.
  • Tlačítko reset: Used to reset stopwatch or select values during setting.
Strana view of Zoop Digital Watch NT16009PP04, highlighting the function buttons.

Figure 2: Illustrative image showing the typical button layout on a digital watch. The blue buttons on the side are used for various functions.

2. Nastavení času a data

  1. Z běžného zobrazení času stiskněte tlačítko MODE třikrát stiskněte tlačítko pro vstup do režimu nastavení času. Číslice sekund budou blikat.
  2. Stiskněte tlačítko RESETOVAT tlačítko pro nastavení sekund na nulu.
  3. Stiskněte tlačítko START/STOP tlačítko pro přechod k nastavení hodin. Číslice hodin budou blikat.
  4. Stiskněte tlačítko RESETOVAT button to adjust the hour. Pay attention to AM/PM if your watch uses a 12-hour format.
  5. Stiskněte tlačítko START/STOP tlačítko pro přechod k nastavení minut. Číslice minut budou blikat.
  6. Stiskněte tlačítko RESETOVAT tlačítko pro nastavení minut.
  7. Pokračujte v stisknutí START/STOP procházejte nastavením měsíce, data a dne v týdnu a upravujte každé z nich pomocí RESETOVAT tlačítko.
  8. Jakmile jsou všechna nastavení správná, stiskněte tlačítko MODE button to exit setting mode and return to the normal time display.

Návod k obsluze

1. Režimy zobrazení

Stiskněte tlačítko MODE tlačítko pro přepínání mezi následujícími režimy zobrazení:

  • Normální zobrazení času: Shows current time (hours, minutes, seconds), day of the week, and date.
  • Režim alarmu: Displays the set alarm time.
  • Režim stopek: Used for timing events.

2. Používání alarmu

  1. Z běžného zobrazení času stiskněte tlačítko MODE jednou stiskněte tlačítko pro vstup do režimu alarmu.
  2. Stiskněte tlačítko START/STOP button to toggle the alarm ON/OFF. An alarm icon will appear/disappear.
  3. Chcete-li nastavit čas budíku, stiskněte tlačítko RESETOVAT knoflík. Začnou blikat číslice hodin.
  4. Stiskněte tlačítko START/STOP nastavte hodinu.
  5. Stiskněte tlačítko RESETOVAT znovu stiskněte tlačítko pro přechod k nastavení minut. Číslice minut budou blikat.
  6. Stiskněte tlačítko START/STOP tlačítko pro nastavení minut.
  7. Stiskněte tlačítko RESETOVAT tlačítko pro potvrzení a ukončení nastavení budíku.
  8. Stiskněte tlačítko MODE tlačítko pro návrat k normálnímu zobrazení času.

Poznámka: The alarm will sound for approximately 20 seconds at the set time. Press any button to stop the alarm.

3. Používání stopek

  1. Z běžného zobrazení času stiskněte tlačítko MODE Dvojitým stisknutím tlačítka přejděte do režimu stopek. Na displeji se zobrazí „00:00:00“.
  2. Stiskněte tlačítko START/STOP tlačítko pro spuštění stopek.
  3. Stiskněte tlačítko START/STOP znovu stiskněte tlačítko pro pozastavení stopek.
  4. Stiskněte tlačítko RESETOVAT tlačítko, když jsou stopky pozastaveny, chcete-li je resetovat na „00:00:00“.
  5. Chcete-li po pozastavení obnovit měření času, stiskněte START/STOP tlačítko.
  6. Stiskněte tlačítko MODE button to exit Stopwatch Mode and return to normal time display.

4. Funkce podsvícení

Stiskněte tlačítko SVĚTLO button to illuminate the display for a few seconds, allowing you to read the time in low-light conditions.

Údržba

Proper care will ensure the longevity and performance of your ZOOP Digital Watch.

1. Čištění

  • Pravidelně otírejte pouzdro a řemínek hodinek měkkým hadříkemamp tkanina.
  • Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and materials.
  • For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.

2. Voděodolnost (30M)

Your watch is water resistant to 30 meters (3 ATM). This means it is suitable for:

  • Daily wear.
  • Splashes.
  • Déšť.
  • Brief immersion in water (e.g., washing hands).

Důležité: It is NOT suitable for showering, bathing, swimming, diving, or any water sports where it will be submerged for extended periods or subjected to high-pressure water. Do not operate buttons while the watch is wet or submerged, as this can compromise the water seal.

Zoop Digital Watch NT16009PP04, showing its durable plastic construction suitable for active kids.

Figure 3: The watch's robust design, highlighting its suitability for daily activities and resistance to splashes.

3. Výměna baterie

The watch uses a standard button cell battery. When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure the water resistance seal is properly maintained. Attempting to replace the battery yourself may void the warranty and compromise water resistance.

4. Skladování

Pokud hodinky nepoužíváte, skladujte je na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Nevystavujte hodinky silným magnetickým polím.

Odstraňování problémů

Pokud se s hodinkami setkáte s jakýmikoli problémy, podívejte se prosím na následující běžné problémy a jejich řešení:

ProblémMožná příčinaŘešení
Displej je prázdný nebo tmavý.Slabá baterie.Replace the battery (refer to Maintenance section).
Čas je nesprávný.Čas nebyl nastaven správně nebo byl omylem resetován.Reset the time and date (refer to Setup section).
Tlačítka nereagují.Hodinky mohou být v uzamčeném režimu (u tohoto modelu to není pravděpodobné) nebo mají vnitřní poruchu.Try pressing all buttons firmly. If still unresponsive, a battery replacement might resolve it. If not, contact support.
Voda uvnitř hodinek.Exceeded water resistance limits or buttons pressed underwater.Immediately stop using the watch. Seek professional repair to prevent further damage.

If the problem persists after trying these solutions, please contact ZOOP customer support for further assistance.

Specifikace

Key technical specifications for the ZOOP Digital Watch NT16009PP04:

  • Číslo modelu: NT16009PP04
  • Typ displeje: Digitální
  • Typ pohybu: Automatický
  • Materiál pouzdra: Plast
  • Materiál pásku: Plast
  • Barva pásma: Modrý
  • Barva ciferníku: Šedá
  • Průměr pouzdra: 38 milimetrů
  • Tloušťka pouzdra: 15 milimetrů
  • Šířka pásma: 20 milimetrů
  • Délka pásma: 22 centimetrů
  • Typ spony: Přezka
  • Hloubka odolnosti proti vodě: 30 metrů (3 bankomatů)
  • Funkce: Time, Date, Day of Week, Alarm, Stopwatch, Backlight
  • Hmotnost položky: 82.2 gramů

Záruka a podpora

Your ZOOP Digital Watch NT16009PP04 comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details. For technical support, service, or warranty claims, please contact ZOOP customer service through their official webwebu nebo kontaktních informací uvedených na obalu produktu.

Pro více informací navštivte oficiální ZOOP brand page.