Progress Lighting Fan and Light Universal Remote Control (Model P2662-01)

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting Universal Fan and Light Remote Control, model P2662-01. This remote control is designed to provide convenient control over your ceiling fan's speed and light functions, including full-range dimming, for single-pole applications.

Image 1: The Progress Lighting Universal Remote Control (P2662-01). This remote features dedicated buttons for light control and fan speed adjustments.

2. Bezpečnostní informace

WARNING: Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect power at the circuit breaker before installing or servicing the remote control or receiver.
• Ujistěte se, že všechna elektrická připojení splňují místní předpisy a vyhlášky.
• Tento výrobek je určen pouze pro vnitřní použití.
• Do not use with solid-state fan speed controls.
• Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o nichž je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné poškození reprodukce.

3. Nastavení a instalace

The universal remote control system includes a handheld remote, a wall mount, and a receiver unit. Proper installation of the receiver unit within the fan canopy and synchronization with the remote are essential for correct operation.

3.1 Obsah balení

• Ruční dálkové ovládání
• Přijímací jednotka
• Nástěnný držák
• 12V baterie (součástí balení)
• Instalační list

Image 2: Components of the universal remote control system, including the remote, receiver, and wall mount.

3.2 Setting DIP Switches

Before installing the receiver, you must set the DIP switches on both the remote control and the receiver unit to the same combination. This ensures proper communication between the two devices and prevents interference from other remote-controlled devices in your home.

1. Locate the battery compartment on the back of the remote control. Open it to access the DIP switches.
2. Locate the DIP switches on the receiver unit. These are typically small switches that can be set to an 'ON' or 'OFF' position.
3. Choose any combination of 'ON' and 'OFF' settings for the DIP switches. Ensure the exact same combination is set on both the remote control and the receiver unit.
4. Close the battery compartment on the remote control.

3.3 Instalace baterie

The remote control requires one 12V battery (included). To install or replace the battery:

1. Otevřete kryt prostoru pro baterie na zadní straně dálkového ovládání.
2. Insert the 12V battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
3. Bezpečně zavřete kryt bateriového prostoru.

3.4 Receiver Installation (Professional Installation Recommended)

The receiver unit must be installed within the canopy of your ceiling fan. This process involves working with electrical wiring and should ideally be performed by a qualified electrician.

1. Odpojte napájení to the ceiling fan at the circuit breaker.
2. Remove the ceiling fan canopy to access the wiring.
3. Wire the receiver unit according to the wiring diagram provided in the separate installation sheet. Typically, this involves connecting the receiver's input wires to the household supply and its output wires to the fan and light fixtures.
4. Carefully tuck the receiver unit into the fan canopy, ensuring no wires are pinched.
5. Reattach the fan canopy.
6. Obnovte napájení na jističi.

3.5 Montáž na stěnu

The included wall mount allows for convenient storage of your remote control.

1. Vyberte vhodné místo na zdi.
2. Use screws (not included) to secure the wall mount bracket to the wall.
3. Place the remote control into the mounted bracket.

4. Návod k obsluze

Once the remote and receiver are properly installed and synchronized, you can operate your ceiling fan and light using the handheld remote.

• Light Button (Bulb Icon): Press to turn the light ON or OFF. Press and hold to dim or brighten the light (full range dimming).
• Fan Speed Buttons (1, 2, 3 Dots):
  • One Dot: Low fan speed.
  • Two Dots: Medium fan speed.
  • Three Dots: High fan speed.
• Fan OFF Button (Square Icon): Press to turn the fan OFF.

5. Údržba

Pro zajištění dlouhé životnosti a správné funkce dálkového ovladače:

• Výměna baterie: Replace the 12V battery when the remote's indicator light dims or the remote becomes unresponsive. Refer to Section 3.3 for battery installation.
• Čištění: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the unit.
• Skladování: Store the remote in a dry place, away from extreme temperatures.

6. Řešení problémů

7. Specifikace

Image 3: Dimensional drawing of the remote control (4-1/2" x 2-3/8") and receiver unit.

8. Informace o záruce

Tento produkt společnosti Progress Lighting je kryt 1letá omezená záruka from the date of purchase. This warranty guarantees your satisfaction and covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Progress Lighting customer service.

9. Zákaznická podpora

For technical assistance, replacement parts, or any questions regarding your Progress Lighting Universal Remote Control, please visit the official Progress Lighting store or contact their customer service department.

Navštivte obchod s osvětlením Progress na Amazonu