GOOLOO X7 4250A Jump Starter with Air Compressor Instruction Manual

1. Úvod

Thank you for choosing the GOOLOO X7 4250A Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting power for vehicles, inflate tires, and serve as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Bezpečnostní informace

Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení a vozidla:

• Do not immerse the device in water or expose it to rain.
• Do not operate the device if it is damaged or has been dropped.
• Uchovávejte mimo dosah dětí.
• Během používání a nabíjení zajistěte dostatečné větrání.
• Zabraňte zkratu startovacího kabeluamps.
• The device features 10 built-in protection functions, including over-current, short-circuit, reverse polarity, low/high temperature, over-voltage, and over-charge protection. However, always follow instructions carefully.
• Do not attempt to jump start a vehicle with a severely damaged or frozen battery.
• Operate within the specified temperature range (-20°C to 60°C).

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x GOOLOO X7 Jump Starter with Air Compressor
• 1 x Smart propojovací kabel
• 1 x kabel USB-A na USB-C
• 1 x taška na přenášení
• 1 x vzduchová hadice
• 3 x vzduchové trysky
• 1 x Uživatelská příručka

Image: GOOLOO X7 Jump Starter with all included accessories, including jumper cables, air hose, and various nozzles.

4. Konec produktuview

Familiarize yourself with the main components of your GOOLOO X7 device:

1. Hlavní jednotka: Contains the battery, control panel, and ports.
2. Digitální displej: Shows battery level, tire pressure, and operating modes.
3. Port pro spuštění Jump Start: For connecting the smart jumper cables.
4. Port vzduchového kompresoru: For connecting the air hose.
5. Výstupní porty USB: Pro nabíjení externích zařízení.
6. Vstupní port USB-C: For charging the GOOLOO X7 itself.
7. LED svítilna: Integrované světlo s několika režimy.

Image: Close-up of the GOOLOO X7's digital display, showing battery indicator and pressure units.

5. Nastavení

Before first use, ensure the GOOLOO X7 is fully charged.

1. Počáteční poplatek: Connect the provided USB-A to USB-C cable to the device's USB-C input port and a suitable USB wall adapter (not included). Charge until the battery indicator on the digital display shows full.
2. Zkontrolujte stav baterie: Press the power button once to check the current battery level on the digital display. It is recommended to have at least 50% charge before jump-starting a vehicle.

Image: Close-up of the Type-C charging port on the GOOLOO X7 device.

6. Návod k obsluze

6.1. Startování vozidla pomocí kabelu

The X7 can jump start all 12V vehicles (up to 10L gasoline and 10L diesel engines) up to 70 times on a single charge.

1. Ensure the GOOLOO X7 has sufficient charge.
2. Connect the smart jumper cable to the jump start port on the X7.
3. Připevněte červenou třamp (+) to the positive terminal of the vehicle battery.
4. Připevněte černou třamp (-) to the negative terminal of the vehicle battery.
5. Once connected correctly, the smart cable indicator light will turn green. If it's red, check connections.
6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again.
7. Jakmile vozidlo nastartuje, odpojte kl.amps from the car battery first, then disconnect the smart cable from the X7.
8. For completely discharged batteries (below 2V), use the Boost function by pressing and holding the Boost button on the smart cable for 3 seconds until the indicator turns green.

Image: The GOOLOO X7 device with smart jumper cables attached, ready for use.

6.2. Použití vzduchového kompresoru

The X7 features a 160 PSI digital tire inflator, capable of inflating a typical car tire to 20 PSI in approximately 2 minutes.

1. Connect the air hose to the air compressor port on the X7.
2. Attach the other end of the air hose to the tire valve. Use appropriate nozzles for different inflatables (e.g., balls, bicycle tires).
3. Turn on the X7. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure. The device supports PSI, BAR, and KPA units.
5. Press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
6. Disconnect the air hose from the tire and the X7.

Image: The GOOLOO X7 device with the air hose and various inflation nozzles.

6.3. Použití jako powerbanky

The X7 can charge your electronic devices with its 18W fast charging capability.

1. Connect your device's charging cable to one of the USB output ports on the X7.
2. The X7 will automatically begin charging your device.

Image: The GOOLOO X7 device connected via USB to charge a mobile phone.

6.4. Používání LED svítilny

The X7 includes a 400-lumen LED flashlight with four modes.

1. Press and hold the flashlight button to turn on the continuous white light.
2. Press the button again to cycle through modes: continuous red light, flashing light, SOS signal.
3. Stiskněte a podržte tlačítko znovu pro vypnutí svítilny.

Image: The GOOLOO X7 device with its integrated LED flashlight illuminated.

7. Charging the GOOLOO X7

To recharge your GOOLOO X7:

1. Connect the provided USB-A to USB-C cable to the X7's USB-C input port.
2. Connect the other end of the cable to a USB wall adapter (5V/3A recommended) or a car charger.
3. The digital display will show the charging progress. Charge until the battery indicator is full.

8. Údržba

Proper maintenance ensures the longevity and performance of your GOOLOO X7.

• Čištění: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• Skladování: Přístroj skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Nabíjení: Recharge the device every 3-6 months if not in regular use to maintain battery health.
• Odvod tepla: The unique honeycomb design aids in heat dissipation, preventing overheating during use and extending product lifespan. Ensure vents are not blocked.

9. Řešení problémů

If you encounter issues with your GOOLOO X7, refer to the following common problems and solutions:

• Zařízení se nezapne: Ensure the device is charged. If completely discharged, charge for at least 30 minutes before attempting to power on.
• Vehicle not jump starting:
  • Check that the smart jumper cable is securely connected to both the X7 and the vehicle battery terminals.
  • Dbejte na správnou polaritu (červená k kladnému, černá k zápornému).
  • If the vehicle battery is extremely low (below 2V), use the Boost function on the smart cable.
  • The vehicle's battery may be beyond jump-starting. Consult a mechanic.
• Vzduchový kompresor se nenafukuje:
  • Ensure the air hose is securely connected to both the X7 and the tire valve.
  • Check that the desired pressure is set and the compressor is turned on.
  • Verify the X7 has sufficient battery charge.
• Externí zařízení se nenabíjejí: Ensure the X7 has sufficient charge and the USB cable is properly connected.

If problems persist, please contact GOOLOO customer support.

10. Specifikace

11. Záruka a podpora

GOOLOO is committed to providing high-quality products and excellent customer service.

• Záruka: The GOOLOO X7 comes with an 18-month warranty from the date of purchase.
• Zásady vrácení: Enjoy a 30-day unconditional return guarantee.
• Zákaznická podpora: GOOLOO offers 24/7 customer support.
• Technická podpora: Lifetime customer and technical support are provided.

For any inquiries, technical assistance, or warranty claims, please contact GOOLOO customer service through the retailer's platform or the official GOOLOO webmísto.

Image: A customer support representative wearing a headset, symbolizing GOOLOO's commitment to customer service.