Návod k obsluze atomových hodin Sharp

Zavedení

The Sharp Atomic Clock provides precise timekeeping and temperature monitoring for your home or office. Featuring a large, easy-to-read display, this clock automatically synchronizes with the atomic time signal (WWVB) broadcast from Fort Collins, Colorado, ensuring accuracy without manual adjustments. It also includes a wireless outdoor sensor to display both indoor and outdoor temperatures.

Vlastnosti produktu

• Přesnost atomového času: Automatically synchronizes with the WWVB atomic time signal for precise timekeeping.
• Jumbo 3" Easy-to-Read Numbers: Large digital display for clear visibility of time, date, and temperature.
• Indoor/Outdoor Temperature Display: Monitors both indoor ambient temperature and outdoor temperature via a wireless sensor.
• Bezdrátový venkovní senzor: Transmits outdoor temperature data to the main unit.
• Napájení z baterie: Operates on batteries for flexible placement (batteries not included).
• Automatic Daylight Saving Time (DST) Adjustment: Automatically adjusts for daylight saving time changes.
• Volitelná časová pásma: Allows selection of various US time zones.
• 12/24hodinový formát: Možnost zobrazení času ve 12hodinovém nebo 24hodinovém formátu.
• Celsius/Fahrenheit Display: Přepínání mezi teplotními jednotkami Celsia a Fahrenheita.

Obsah balení

Please ensure all items are present before proceeding with setup.

• Hlavní jednotka atomových hodin Sharp
• Bezdrátový venkovní snímač
• Návod k použití

Note: Batteries are not included. The main unit requires 2 AA batteries, and the outdoor sensor requires 2 AA batteries.

Nastavení

1. Instalace baterie

1. Otevřete kryt baterie na zadní straně hlavní jednotky hodin.
2. Insert 2 AA batteries, observing the correct polarity (+ and -).
3. Zavřete kryt prostoru pro baterie.
4. Open the battery compartment on the wireless outdoor sensor.
5. Insert 2 AA batteries into the outdoor sensor, observing the correct polarity.
6. Close the outdoor sensor's battery compartment cover.

2. Počáteční synchronizace a nastavení

After battery installation, the clock will attempt to receive the WWVB atomic time signal and connect to the outdoor sensor. This process may take several minutes or up to 24 hours depending on your location and environmental interference.

• Časové pásmo: Press the "TIME ZONE" button (often labeled "UP TIME ZONE") on the back of the clock to cycle through available time zones (PST, MST, CST, EST). Select your desired time zone.
• 12/24hodinový formát: Press the "12/24" button to switch between 12-hour and 24-hour display.
• Celsia/Fahrenheita: Press the "°C/°F" button to toggle between Celsius and Fahrenheit temperature display.
• Outdoor Sensor Pairing: If the outdoor temperature does not appear, press the "CHANNEL" button on the main unit to search for the sensor signal. Ensure the outdoor sensor is within range and not obstructed.

For optimal signal reception, place the clock away from large metal objects, electronic devices, and areas with heavy concrete or brick walls. The outdoor sensor should be placed in a shaded, dry location, protected from direct sunlight and precipitation, for accurate readings.

Image: The Sharp Atomic Clock main unit displaying time, indoor temperature, date, and outdoor temperature, alongside its wireless outdoor sensor.

Operace

Zobrazení informací

The clock's large LCD screen displays the following information:

• Čas: Current time in selected 12-hour or 24-hour format.
• Indikátor PM: Displays "PM" for afternoon hours in 12-hour format.
• Indikátor atomového signálu: Shows the status of the WWVB atomic time signal reception.
• Vnitřní teplota: Aktuální teplota měřená hlavní jednotkou.
• Month/Date/Day: Current calendar information.
• Venkovní teplota: Current temperature measured by the wireless outdoor sensor.
• Kanál venkovního senzoru: Indicates the channel the outdoor sensor is transmitting on.
• Indikátor slabé baterie: An icon will appear when batteries are low and need replacement.

Button Functions (Rear Panel)

Údržba

• Výměna baterie: Replace batteries in both the main unit and outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones.
• Čištění: Clean the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Umístění venkovního senzoru: Periodically check the outdoor sensor's location to ensure it remains protected from extreme weather conditions, direct sunlight, and moisture.

Odstraňování problémů

• Clock not syncing with atomic time:
  • Ensure the clock is placed away from electronic interference (TVs, computers, microwaves).
  • Try placing the clock near a window facing Fort Collins, Colorado (if applicable to your region).
  • Press the "WAVE" button to initiate a manual signal search.
  • Počáteční synchronizace může trvat až 24 hodin.
• Outdoor temperature not displaying or incorrect:
  • Check batteries in the outdoor sensor.
  • Ensure the outdoor sensor is within the effective transmission range (typically up to 100 feet, line of sight).
  • Stiskněte tlačítko „KANÁL“ na hlavní jednotce pro obnovení připojení.
  • Verify the outdoor sensor is placed in a location protected from direct sunlight and rain, which can affect readings.
• Displej je tmavý nebo prázdný:
  • Replace all batteries in the main unit with fresh ones.
  • Ujistěte se, že jsou baterie vloženy se správnou polaritou.
• Nesprávný čas nebo datum:
  • Ověřte, zda je vybráno správné časové pásmo.
  • Check if Daylight Saving Time (DST) setting is correct for your region.
  • If atomic signal is not received, manually set the time and date using the "TIME" and "CALENDAR" buttons.

Specifikace

Záruka a podpora

Sharp products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your product packaging or visit the official Sharp webUschovejte si účtenku jako doklad o koupi pro případ reklamace.