1. Úvod
The Steinel L 840 SC is an advanced LED outdoor wall light designed for modern exterior illumination. It features an integrated 160° high-frequency motion detector and smart control capabilities via the Steinel Connect app. This light provides warm white illumination and offers various customizable settings for enhanced security and convenience around your home, pathways, garden, and patio.
2. Bezpečnostní pokyny
- Elektrická bezpečnost: Installation must be performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.
- Odpojení napájení: Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or repair work.
- Venkovní použití: This product is designed exclusively for outdoor use. Ensure proper sealing and weather protection during installation.
- Montážní plocha: Mount the light on a stable, flat surface that can support its weight.
- Provozní svtage: Zajistěte napájení objtagodpovídá uvedenému objemu produktutage (220-240 V).
- Nevyměnitelná LED: The LED light source is integrated and cannot be replaced. Do not attempt to open the LED module.
3. Obsah balení
Zkontrolujte prosím, zda jsou všechny součásti přítomny a nepoškozené:
- Steinel L 840 SC LED Outdoor Wall Light
- Mounting material (3 screws, 3 wall plugs, 3 spacers)
- Uživatelská příručka
4. Nastavení a instalace
The Steinel L 840 SC is designed for wall mounting. Ensure the chosen location provides optimal coverage for the motion sensor and is within reach of the electrical supply.
4.1 Úvahy o místě montáže
- Výška: For optimal motion detection, mount the light at a height of approximately 1.8 to 2.5 meters.
- Dosah senzoru: The 160° high-frequency sensor has a range of up to 5 meters. Consider the desired detection area when positioning.
- překážky: Avoid mounting near large metal objects, dense foliage, or other sources of interference that might affect sensor performance.
4.2 kroky instalace
- Odpojit napájení: Turn off the main power supply to the installation area at the circuit breaker. Verify that the power is off using a voltage tester.
- Připravte montážní povrch: Mark the drilling points on the wall using the light fixture as a template. Drill holes and insert the provided wall plugs.
- Zapojení: Connect the electrical wires (Live, Neutral) from your household wiring to the corresponding terminals on the light fixture. Ensure secure connections.
- Namontujte přípravek: Secure the light fixture to the wall using the provided screws and spacers. Ensure it is firmly attached.
- Obnovit napájení: Once installation is complete and all connections are secure, restore power at the circuit breaker. The light will perform an initial self-test.
Figure 1: Steinel L 840 SC LED Outdoor Wall Light. This image shows the anthracite-colored wall light, highlighting its compact and modern design.
Figure 2: The L 840 SC light installed on an exterior wall, providing illumination to a patio area at night. This demonstrates its aesthetic integration and functional lighting.
5. Návod k obsluze
The Steinel L 840 SC is primarily controlled and configured via the Steinel Connect app.
5.1 Steinel Connect App
The free Steinel Connect app allows you to customize various settings of your L 840 SC light.
- Stáhněte si aplikaci: Download the "Steinel Connect" app from the Google Play Store (for Android devices) or the Apple App Store (for iOS devices).
- Párování: Follow the in-app instructions to pair your L 840 SC light via Bluetooth. Ensure Bluetooth is enabled on your smartphone.
- Konfigurace: Once paired, you can access and adjust the following settings:
- Nastavení pohybového senzoru: Adjust the detection range (up to 5m) and sensitivity in 3 directions to fine-tune motion detection. The sensor is designed to ignore small animals and swaying branches.
- Délka světla: Set how long the main light stays on after motion is detected.
- Nastavení soumraku: Define the ambient light level at which the sensor becomes active.
- Night Light (Basic Light): Enable a continuous low-level illumination (10% to 50% brightness) during darkness for constant ambient lighting.
- Nepřetržité světlo: Activate a 4-hour continuous full brightness mode for extended illumination when needed.
- Dimmable Main Light: Adjust the brightness of the main light output from 50% to 100%.
- Light Groups (Bluetooth Mesh): Connect multiple Steinel Connect lights to create groups and control them simultaneously for synchronized lighting scenarios.
Figure 3: Screenshot of the Steinel Connect app interface, demonstrating the various settings available for controlling the light fixture.
Figure 4: Diagram illustrating how multiple Steinel Connect lights can form a Bluetooth Mesh network for synchronized control.
5.2 Provoz senzoru pohybu
The L 840 SC features an invisible 160° high-frequency sensor that reliably detects human movement.
- Princip detekce: The sensor emits high-frequency electromagnetic waves and detects changes in the echo caused by movement within its detection zone.
- Inteligentní detekce: It is optimized to differentiate between human movement and smaller disturbances like pets or wind-blown foliage, reducing false triggers.
- Nastavitelný rozsah: The detection range can be precisely adjusted via the app to suit the specific requirements of your installation area.
Figure 5: Visual representation of the high-frequency sensor's detection pattern, showing how it emits waves to detect movement.
Figure 6: Diagram illustrating the typical motion detection range of the sensor in an outdoor environment, showing its coverage area.
6. Údržba
The Steinel L 840 SC is designed for low maintenance. The integrated LED system has a long lifespan of approximately 50,000 hours, meaning bulb replacement is not required.
- Čištění: Pro čištění svítidla jej otřete měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrch.
- Inspekce: Pravidelně kontrolujte svítidlo, zda nevykazuje známky poškození nebo uvolněných spojů. Pokud zjistíte jakékoli problémy, odpojte napájení a obraťte se na kvalifikovaného elektrikáře.
7. Řešení problémů
If you encounter issues with your Steinel L 840 SC, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power supply; incorrect wiring; twilight setting too high. | Check circuit breaker; verify wiring connections; adjust twilight setting in the app. |
| Světlo svítí nepřetržitě. | Continuous light mode activated; constant motion in detection area; faulty sensor. | Deactivate continuous light in the app; check for persistent movement; contact support if sensor is faulty. |
| Senzor nedetekuje pohyb. | Detection range too small; sensor obstructed; incorrect sensitivity setting. | Increase detection range in the app; clear obstructions; adjust sensor sensitivity. |
| Nelze se připojit k aplikaci. | Bluetooth off; light not in pairing mode; app issues. | Ensure Bluetooth is on; restart the light; restart the app or reinstall it. |
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Číslo modelu | 055530 |
| Rozměry (D x Š x V) | 11 x 11 x 13.4 cm |
| Hmotnost | 0.504 kg |
| Napájení | 220 – 240 V / 50 – 60 Hz |
| Wattage | 9.1 wattů |
| Světelný tok | 319 lm |
| Světlá barva | Teplá bílá (3000 K) |
| Životnost LED | 50,000 hodin |
| Pohybový senzor | 160° High-Frequency (invisible) |
| Rozsah detekce | Až 5 metrů |
| Konektivita | Bluetooth |
| Kontrolní metoda | Steinel Connect App (iOS/Android) |
| Materiál | UV-resistant Plastic |
| Barva | Antracit |
| Třída ochrany | Waterproof (specific IP rating not provided, but implied by 'waterproof') |
| Typ instalace | Držák na zeď |
| Tvar položky | Obdélníkový |
9. Záruka a podpora
Steinel products are manufactured to high-quality standards and undergo rigorous testing. For specific warranty information, please refer to the warranty card included with your product or visit the official Steinel webmísto.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Steinel customer support through their official webwebu nebo kontaktních informací uvedených na obalu produktu.
Figure 7: The Steinel Tap Duo C wireless switch, an optional accessory that can be used to control Steinel Connect lights.