ELKRON IR15 Passive Infrared Detector (Model 80IR3D00113) Instruction Manual

1. Úvod

1.1 Konec produktuview

The ELKRON IR15 is a digital passive infrared (PIR) volumetric detector designed for indoor security applications. It detects motion by sensing changes in infrared radiation within its detection zone. This device features two selectable sensitivity levels, a maximum detection range of 15 meters, and a 90° opening angle. Its Fresnel lens is configured with 18 beams across 4 planes, including a look-down zone for enhanced coverage.

1.2 Bezpečnostní informace

• Před instalací a provozem si pečlivě přečtěte všechny pokyny.
• Instalaci by měl provádět kvalifikovaný personál v souladu s místními elektrotechnickými předpisy.
• Před prováděním jakéhokoli zapojení nebo údržby odpojte napájení.
• Do not expose the detector to direct sunlight, extreme temperatures, or high humidity.
• Avoid mounting near heat sources, air conditioning vents, or objects that may cause rapid temperature changes.

2. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• ELKRON IR15 Passive Infrared Detector unit
• Montážní šrouby a hmoždinky
• Návod k použití (tento dokument)

3. Instalace

3.1 Místo montáže

Choose a mounting location that provides optimal coverage of the area to be protected. The detector can be mounted on a wall or in a corner. Ensure the detector is positioned to avoid direct line of sight to windows, heat sources, or moving objects that are not intended to trigger the alarm.

Recommended mounting height: 2.1 to 2.4 meters (7 to 8 feet) from the floor.

3.2 Montáž detektoru

1. Opatrně otevřete detektor casing.
2. Mark the drilling points on the wall or corner using the detector's base as a template.
3. V případě potřeby vyvrtejte otvory a vložte hmoždinky.
4. Secure the detector base to the wall or corner using the provided screws.
5. Route the wiring through the designated opening in the base.

Figure 1: ELKRON IR15 Passive Infrared Detector. This image shows the compact design of the detector, suitable for discreet wall or corner mounting.

3.3 Zapojení kabeláže

The ELKRON IR15 requires a 12V DC power supply. Connect the power and alarm output wires to your security system control panel as follows:

• Příkon: Connect 12V DC to the designated terminals (typically + and -).
• Výstup alarmu: Connect the opto-relay output (NO/NC) to the alarm zone input of your control panel.
• Tamper přepínač: Připojte tamper output to a 24-hour tamper zone on your control panel. This switch activates if the detector casing je otevřeno.

Ensure all connections are secure and correctly polarized. Refer to your security system's manual for specific wiring diagrams.

4. Nastavení

4.1 Nastavení citlivosti

The ELKRON IR15 offers two selectable sensitivity levels to adapt to different environments and reduce false alarms. A jumper or switch inside the detector typically controls this setting.

• Vysoká citlivost: Recommended for environments with minimal environmental disturbances.
• Nízká citlivost: Recommended for environments prone to minor disturbances (e.g., small pets, air currents) to prevent false alarms.

After adjusting the sensitivity, perform a walk test to ensure proper detection coverage and to verify that the chosen sensitivity level is appropriate for the protected area.

5. Principy fungování

The ELKRON IR15 is a passive infrared detector, meaning it does not emit any energy. Instead, it detects changes in infrared energy (heat) within its field of view. When a person or object with a different temperature than the ambient environment moves into the detection zone, the detector's Fresnel lens focuses this change onto its pyroelectric sensor. If the change in infrared energy meets the detector's criteria (based on sensitivity settings), it triggers an alarm signal to the connected security control panel.

The 90° detection angle and 15-meter range ensure comprehensive coverage for typical indoor spaces. The "look down zone" feature helps detect intruders moving directly below the detector.

6. Údržba

To ensure optimal performance and longevity of your ELKRON IR15 detector, follow these maintenance guidelines:

• Pravidelný úklid: Pravidelně čistěte čočku a kryt detektoru.asing with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• Zkouška chůze: Perform a walk test at least once a year, or after any significant changes to the protected area, to confirm proper operation and detection coverage.
• Kontrola napájení: Ensure the 12V DC power supply is stable and within the specified voltage rozsah.
• Kontrola prostředí: Verify that no new obstructions or heat sources have been introduced into the detection zone that could interfere with operation.

7. Řešení problémů

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact ELKRON technical support.

8. Specifikace

9. Záruka a podpora

ELKRON products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELKRON webUschovejte si doklad o koupi pro případ reklamace.

For technical assistance, troubleshooting, or service, please contact your authorized ELKRON dealer or ELKRON customer support. Contact information can typically be found on the ELKRON webmísto nebo obal produktu.

Webmísto: www.elkron.it (Napřampodkaz, skutečný odkaz se může lišit)