Easytry123 Easytry5142

Návod k obsluze náhradního dálkového ovladače Easytry123

For Onkyo A/V AV Receivers (Models: HT-R758, TX-SR876, HT-S6500, HT-RC460, etc.)

1. Úvod

This manual provides instructions for the Easytry123 replacement remote control, designed for use with various Onkyo A/V AV receiver models. This remote functions as an infrared (IR) replacement and may not offer all the exact functions of your original remote. Please ensure your original remote control matches the appearance of this replacement for optimal compatibility.

Důležitá poznámka: This remote is an infrared replacement. It is crucial to verify that your specific Onkyo A/V AV receiver model is listed as compatible. If your model is not explicitly mentioned, compatibility cannot be guaranteed.

2. Nastavení: Instalace baterie

Before using your new remote control, you must install the batteries.

  1. Otevřete přihrádku na baterie: Locate the battery compartment cover on the back of the remote control. Gently slide the cover downwards or press the latch and lift to open it.
  2. Vložte baterie: Insert two (2) AA alkaline batteries into the compartment. Ensure that the positive (+) and negative (-) terminals of the batteries align correctly with the markings inside the compartment. Incorrect insertion can prevent the remote from functioning.
  3. Zavřete přihrádku na baterie: Nasaďte kryt přihrádky na baterie tak, že jej zasunete zpět na místo, dokud bezpečně nezacvakne.
Zadní strana dálkového ovladače s odstraněným krytem baterie, na které jsou vidět dva prázdné sloty pro baterie.

Obrázek 1: Zadní strana view of the remote control with the battery cover detached, revealing the battery compartment. Note the polarity markings for battery insertion.

Zadní strana dálkového ovladače s odstraněným krytem baterie, na které jsou vidět dva prázdné sloty pro baterie.

Image 2: Another perspective of the remote control's rear, with the battery cover removed, clearly showing the two AA battery slots and their respective positive and negative terminals.

3. Návod k obsluze

This remote control is designed for immediate use with compatible Onkyo A/V AV receivers without requiring programming. Simply point the remote at your receiver and press the desired function button.

3.1 Základní funkce

  • Zapnutí/vypnutí: Stiskněte tlačítko MOC button to turn your receiver on or off.
  • Ovládání hlasitosti: Použijte VOL+ a OBJEM - tlačítka pro nastavení hlasitosti zvuku.
  • Výběr vstupu: Use the dedicated input buttons (e.g., DVD, CD, TUNER, HDMI) to switch between different audio/video sources.
  • Ztlumit: Stiskněte tlačítko ZTLUMIT tlačítko pro dočasné ztlumení zvuku. Dalším stisknutím zvuk obnovíte.

3.2 Kompatibilita

This remote is compatible with various Onkyo A/V AV receiver models, including but not limited to:

  • HT-R758
  • TX-SR876
  • RC-742M
  • HT-S6500
  • TX-SR876S
  • RC-866M
  • HT-RC460
  • RC-747M
  • RC-743M
  • HT-R791

If your specific model is not listed, please compare the button layout and appearance of this remote with your original remote control to confirm compatibility.

4. Údržba

4.1 Čištění

K čištění dálkového ovladače použijte měkký, suchý hadřík. V případě odolných nečistot lehceampOtřete hadřík vodou nebo jemným neabrazivním čisticím prostředkem. Nepoužívejte agresivní chemikálie, rozpouštědla nebo abrazivní materiály, protože by mohly poškodit povrch dálkového ovladače nebo jeho vnitřní součásti.

4.2 Výměna baterie

Replace the batteries when the remote control's performance diminishes or stops working. Always replace both batteries at the same time with new AA alkaline batteries. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or improper function.

Likvidace: Použité baterie zlikvidujte v souladu s místními předpisy. Nevyhazujte baterie do domovního odpadu.

5. Řešení problémů

  • Dálkové ovládání nereaguje:
    • Zkontrolujte, zda jsou baterie vloženy správně se správnou polaritou (+/-).
    • Replace the batteries with fresh AA alkaline batteries.
    • Ensure there are no obstructions between the remote control and the A/V receiver's infrared sensor.
    • Verify that you are within the maximum operating range (approximately 10 meters).
  • Některé funkce nefungují:
    • This replacement remote may not have all the exact functions of your original remote. Refer to your receiver's original manual for specific functions.
    • Ujistěte se, že dálkový ovladač míří přímo na přijímač.
  • Problémy s kompatibilitou:
    • Confirm that your receiver model is listed as compatible.
    • Compare the button layout of this remote with your original remote. Significant differences may indicate partial or no compatibility.

6. Specifikace

ZnačkaEasytry123
Číslo modeluEasytry5142
Technologie připojeníInfračervený (IR)
Kompatibilní zařízeníOnkyo A/V AV Receivers (Specific models listed in Section 3.2)
Maximální počet podporovaných zařízení1
Zdroj napájení2 x AA alkalické baterie (nejsou součástí balení)
Maximální dosah10 metru (přibližně 33 stop)
Hmotnost položky120 gramů

7. Záruka a podpora

For any questions regarding the compatibility or functionality of this replacement remote control, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty information.

Poznámka: This product is a replacement remote and may not be covered by the original equipment manufacturer's warranty.

© 2023 Easytry123. All rights reserved.

Tato příručka slouží pouze pro informační účely. Specifikace se mohou změnit bez předchozího upozornění.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.