Uživatelská příručka bezdrátového ovladače Surge Switchpad Pro

Zavedení

This manual provides instructions for the Surge Switchpad Pro Wireless Controller, designed for use with the Nintendo Switch. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Obrázek: Přední strana view of the Surge Switchpad Pro Wireless Controller in blue, with its included USB-C charging cable.

Obsah balení

• Surge Switchpad Pro Wireless Controller
• Nabíjecí kabel USB-C
• Uživatelská příručka

Funkce ovladače

• 6-Axis Motion Control: Compatible with motion-sensing games.
• 4 tlačítek makra: Programmable rear paddle buttons for custom button combos.
• Dobíjecí baterie 550mAh: Provides up to 12 hours of gameplay.
• Turbo funkce: Assign Turbo to any face button or trigger.
• Bezdrátové připojení: Bluetooth connectivity for stable connection up to 25ft.

Image: Diagram highlighting key features of the Surge Switchpad Pro: Bluetooth Connection, Rumble Feedback, and Rechargeable battery.

Nastavení

Nabíjení ovladače

Before initial use, fully charge the controller. Connect the included USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., Nintendo Switch dock, computer, or USB wall adapter).

Obrázek: Spodní strana view of the Surge Switchpad Pro, showing the USB-C charge port located between the R1 and L1 buttons.

The LED player indicators on the front of the controller will illuminate during charging and turn off when fully charged.

Párování s Nintendo Switch

1. From the Nintendo Switch HOME Menu, select 'Controllers'.
2. Select 'Change Grip/Order'.
3. On the Surge Switchpad Pro, press and hold the SYNC button (usually a small button on the top edge or back) for a few seconds until the LED player indicators begin to flash rapidly.
4. Once the controller is successfully paired, the player indicator(s) corresponding to its assigned player number will remain lit.

Návod k obsluze

Základní ovládací prvky

The Surge Switchpad Pro features standard Nintendo Switch controller button layouts, including A/B/X/Y buttons, directional pad, left and right analog sticks, L/R/ZL/ZR shoulder buttons, and Home, Capture, Plus (+), and Minus (-) buttons.

Image: A person holding and using the Surge Switchpad Pro Wireless Controller during gameplay.

Macro Button Programming

The 4 macro buttons (typically located on the rear of the controller) can be programmed to execute a sequence of button presses. Refer to the specific instructions provided with your controller for detailed programming steps, as this may vary slightly.

Turbo Function Activation

To activate Turbo functionality for a button:

1. Stiskněte a podržte Turbo tlačítko.
2. While holding Turbo, press the desired button (e.g., A, B, X, Y, L, R, ZL, ZR) you wish to assign Turbo functionality to.
3. Release both buttons. The assigned button will now rapidly repeat its input when held down.

To deactivate Turbo for a button, repeat the process. To clear all Turbo settings, press and hold the Turbo button for 5 seconds.

Image: Close-up of the Surge Switchpad Pro showing the four LED player indicators below the Home button.

Údržba

Čištění

• Use a soft, dry cloth to wipe the controller.
• Pro odolnou špínu lehceampOtřete hadřík vodou nebo jemným čisticím roztokem. Vyhněte se agresivním chemikáliím.
• Nedovolte, aby se do otvorů regulátoru dostaly kapaliny.

Skladování

• Regulátor skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Pokud baterii skladujete delší dobu, ujistěte se, že je částečně nabitá (kolem 50 %), abyste prodloužili její životnost.

Odstraňování problémů

Ovladač se nepřipojuje/nepáruje

• Ujistěte se, že je ovladač plně nabitý.
• Verify that the Nintendo Switch is updated to the latest system software.
• Try re-pairing the controller by following the 'Pairing with Nintendo Switch' steps in the Setup section.
• If multiple controllers are paired, try disconnecting other controllers from the Switch settings.
• Restartujte konzoli Nintendo Switch.

Vstupní zpoždění nebo výpadky

• Ensure you are within the 25ft wireless range of the Nintendo Switch.
• Minimalizujte rušení od jiných bezdrátových zařízení (např. Wi-Fi routerů, mikrovlnných trub).
• Ensure the controller is fully charged. Low battery can affect wireless performance.

Tlačítka nereagují

• Check if the controller is properly paired and connected.
• Restart the controller by holding the Home button for 10 seconds, then pressing it again to turn it back on.
• If a specific button is stuck, gently clean around it to remove any debris.

Specifikace

Záruka a podpora

Information regarding product warranty and customer support was not available in the provided product data. Please refer to the product packaging or the official Surge webpodrobnosti o záruce a kontaktní informace na podporu naleznete na webu.