Uživatelská příručka k bezdrátovému dálkovému ovladači AODELAN BR-E1A

1. Úvod

The AODELAN BR-E1A Wireless Remote Control is designed to provide convenient and wireless operation of your compatible Canon camera. This remote allows you to trigger the camera shutter for both still photos and videos, offering flexibility and reducing camera shake. It supports immediate release and a 2-second delay release for still photography, and also enables autofocus and zoom functions when used with a compatible Power Zoom Adapter (sold separately).

Figure 1.1: AODELAN BR-E1A Wireless Remote Control and its retail packaging.

Figure 1.2: Diagram illustrating the various parts of the BR-E1A remote control, including the Shutter Release Button, Indicator Lamp, AF (Auto Focus) button, W (Wide-angle) button, T (Telephoto) button, Strap Hole, Shutter Release Timing/Movie Shooting Switch, Battery Compartment Cover, and Battery Compartment Cover Screw.

2. Nastavení a párování

2.1. Instalace baterie

The AODELAN BR-E1A remote control uses one CR2 battery (included). To install or replace the battery:

1. Vyhledejte kryt přihrádky na baterie na zadní straně dálkového ovladače (viz obrázek 1.2).
2. Use a small screwdriver or coin to gently open the battery compartment cover.
3. Vložte baterii CR2 a dbejte na správnou polaritu (+/-) vyznačenou uvnitř přihrádky.
4. Bezpečně zavřete kryt bateriového prostoru.

2.2. Pairing the Remote Control with Your Camera

Before using the remote control, you must pair it with your compatible Canon camera. The pairing process may vary slightly depending on your camera model. Ensure your camera's drive mode is set to remote mode for still images.

Method A: For Canon EOS R3, R5, R6, M200, M50 Mark II, M6 Mark II, Rebel T8i (850D), SL3 (250D/200DII), 90D

Figure 2.1: Visual guide for pairing Method A.

1. Set Wi-Fi settings to [Enable].
2. Vyberte [📶]: Wi-Fi/Bluetooth connection.
3. Vyberte možnost [Připojit k bezdrátovému dálkovému ovladači].
4. Select [Add a device to connect to].
5. Lis [OK].
6. When the [Pairing] screen appears, press and hold the W a T buttons on the BR-E1A simultaneously for at least 3 seconds. The indicator light on the remote will blink during pairing and once more when complete.
7. After a message confirms the camera is paired with the BR-E1A, press SOUBOR.

Set up the camera for remote shooting:

• When shooting still photos, select [⏱] nebo [⏱2] as the drive mode.
• For movie recording, set [🎥 Remote control] to [Enable].

Method B: For Canon EOS RP, R, M50, T7i (800D), SL2 (200D), 77D, 6D Mark II, PowerShot SX70 HS, G5 X Mark II, G7 X Mark III

Figure 2.2: Visual guide for pairing Method B.

1. Select Wireless communication settings.
2. Select Bluetooth function.
3. Select Bluetooth function.
4. Select Remote.
5. Select [Pairing].
6. When the [Pairing] screen appears, press and hold the W a T buttons on the remote control simultaneously for at least 3 seconds.

* When pairing is complete, a message about the remote control will be displayed on the LCD monitor.

Důležitá poznámka: For still photography, your camera must be set to a remote trigger mode (e.g., 2-second timer or 10-second timer) in the camera settings. If this is not set, the remote will not function for still photos.

3. Ovládání dálkového ovladače

The AODELAN BR-E1A remote control offers versatile functionality for both still photography and video recording. It operates wirelessly up to a range of 10 meters (32.8 feet) and does not require direct line-of-sight to the camera.

Figure 3.1: The BR-E1A remote control allows for wireless shooting of photos and movies from up to 32.8 feet away.

3.1. Still Photography

To take still photos, ensure your camera is set to a remote trigger mode (e.g., 2-second timer or 10-second timer).

Figure 3.2: The side switch on the remote control allows selection between Immediate Release, 2-second Delay Release, and Movie Shooting modes.

• Okamžité vydání: Slide the side switch to the single dot icon (●). Press the main shutter release button on the remote to take a photo instantly.
• 2sekundové zpoždění uvolnění: Slide the side switch to the two dots icon (●●). Press the main shutter release button on the remote. The camera will take a photo after a 2-second delay, which helps to further minimize camera shake.

3.2. Nahrávání videa

Spuštění nebo zastavení nahrávání videa:

• Slide the side switch to the movie camera icon (🎥).
• Press the main shutter release button on the remote to start recording. Press it again to stop recording.

3.3. Autofocus and Zoom Functions

The BR-E1A remote control also supports autofocus and zoom functions:

Figure 3.3: The remote control features dedicated buttons for Auto Focus (AF), Wide-angle (W), and Telephoto (T) functions.

• AF (Auto Focus) Button: Stiskněte tlačítko AF button to activate the camera's autofocus system. This is useful for ensuring your subject is sharp before taking a photo or starting a video.
• Tlačítko W (širokoúhlý záběr): When used with a compatible Power Zoom Adapter (e.g., Canon PZ-E1, sold separately) and a compatible lens (e.g., EF-S 18-135mm f/3.5-5.6 IS USM), press the W button to zoom out (wide-angle).
• Tlačítko T (teleobjektiv): When used with a compatible Power Zoom Adapter and lens, press the T button to zoom in (telephoto).

Figure 3.4: The remote control is ideal for various occasions, including travel, parties, meetings, and daily use, allowing for stable shots from a distance.

4. Údržba

4.1. Čištění

Pro zachování výkonu a vzhledu dálkového ovladače:

• Dálkový ovladač otřete měkkým, suchým hadříkem.
• Na odolné nečistoty lehce damphadřík vodou a jemným čisticím prostředkem a poté ihned otřete dosucha.
• Do not use strong cleaning agents, solvents, or abrasive materials, as these can damage the surface.

4.2. Skladování

When not in use for extended periods, store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.

4.3. Výměna baterie

If the remote control's indicator lamp does not light up or its range decreases significantly, the CR2 battery may need to be replaced. Follow the battery installation steps outlined in Section 2.1.

5. Řešení problémů

If you encounter issues with your AODELAN BR-E1A Wireless Remote Control, please refer to the following common solutions:

6. Specifikace

Key technical specifications for the AODELAN BR-E1A Wireless Remote Control:

• Značka: AODELAN
• Název modelu: BR-E1A
• Technologie připojení: Bezdrátové (Bluetooth)
• Speciální funkce: Bezdrátový provoz
• Maximální rozsah: 10 metrů (32.8 stop)
• Počet tlačítek: 1 (Shutter Release) + 3 (AF, W, T)
• Typ ovladače: Ovládání tlačítkem
• Baterie: 1 x CR2 (součástí balení)
• Složení baterie: Lithium-iontová
• Kompatibilní zařízení:

  Canon EOS M Series: M50, M50 Mark II, M200, M6 Mark II

  Canon EOS R Series: EOS R3, EOS R, EOS RP, EOS R5, EOS R6, R5C, R7, R10

  Řada Canon EOS: 6D Mark II, 77D, 800D (EOS Rebel T7i), T8i, 200D (EOS Rebel SL2), 200D II, 250D (EOS Rebel SL3), 850D, 90D

  Canon PowerShot G Series: G5X Mark II, G7X Mark III

  Canon PowerShot SX Series: SX70 HS

Figure 6.1: A detailed list of compatible Canon digital camera models.

7. Záruka a podpora

Specific warranty information for the AODELAN BR-E1A Wireless Remote Control is not provided within this manual. Please refer to the product packaging or the manufacturer's official webpodrobné záruční podmínky naleznete na webu.

For technical support or further assistance, please contact AODELAN customer service through their official channels.