SMALLRIG Universal Magic Arm with Small Ballhead

Konec produktuview

The SMALLRIG Universal Magic Arm with Small Ballhead (Model 2158) is a versatile mounting solution designed for attaching various camera accessories such as monitors, LED lights, and microphones to camera cages, top plates, or other rigging setups. Its compact design and adjustable ballheads provide flexible positioning for your equipment.

Image: The SMALLRIG Universal Magic Arm with Small Ballhead 2158, showing its compact size and dual 1/4-inch screws.

Klíčové vlastnosti

• Nastavitelné úhly: Features a central wingnut for adjusting the angles and positions of attached accessories. It supports 360-degree rotation for optimal flexibility.
• Bezpečný uzamykací mechanismus: The wingnut allows for quick and convenient tightening, ensuring accessories are securely locked in place.
• Universal 1/4-inch Screws: Equipped with 1/4-inch screws at both ends, enabling attachment to various camera cages, top plates, handles, monitors, or video lights.
• Kompaktní design: This is a smaller model, ideal for lightweight setups and portability.

Image: Illustration of the 360-degree rotation capability of the ballheads and the protective rubber pad.

Pokyny pro nastavení

1. Attach to Camera Rig: Identify a 1/4-inch threaded hole on your camera cage, top plate, or handle. Screw one end of the Magic Arm into this hole until secure.
2. Připojení příslušenství: Identify the 1/4-inch threaded mounting point on your monitor, LED light, microphone, or other accessory. Screw the other end of the Magic Arm into this point.
3. Upravit pozici: Loosen the central wingnut to allow the ballheads to move freely. Position your accessory to the desired angle and orientation.
4. Bezpečná pozice: Tighten the central wingnut firmly to lock both ballheads simultaneously, securing the accessory in its adjusted position.

Image: The Magic Arm securely mounted to a camera cage, holding a monitor in an adjustable position.

Provozní směrnice

• Always ensure the central wingnut is fully tightened before operating your equipment to prevent accidental movement or detachment of accessories.
• The maximum recommended load for this Magic Arm is 1.0 kg (2.2 lb). Exceeding this weight limit may compromise stability and could damage the arm or attached equipment.
• When adjusting the arm, support the attached accessory to prevent sudden drops or stress on the ballheads.

Obrázek: Podrobný view of the Magic Arm, highlighting its 72.5mm length and the 1kg (2.2lbs) maximum load capacity.

Údržba

• Clean the Magic Arm regularly with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Periodically check all threaded connections and the central wingnut for tightness. Re-tighten if any looseness is detected.
• Store the arm in a dry, clean environment when not in use to prevent corrosion or damage.

Odstraňování problémů

• Accessory not holding position: Ensure the central wingnut is tightened sufficiently. The ballheads require firm compression to maintain their position.
• Arm feels loose after tightening: Verify that the 1/4-inch screws are fully engaged with the mounting points on both the rig and the accessory. Check for any wear or damage to the threads or ballheads.
• Accessory is too heavy: Confirm that the weight of your accessory does not exceed the 1.0 kg (2.2 lbs) maximum load recommendation.

Specifikace

Image: Visual representation of product parameters including net weight and material.

Záruka a podpora

Information regarding product warranty and customer support for the SMALLRIG Universal Magic Arm with Small Ballhead (Model 2158) was not provided in the product data. Please refer to the official SMALLRIG website or contact their customer service directly for the most up-to-date warranty details and support options.