Monoprice 133833 Immersive Satellite Speakers User Manual

1. Úvod

Děkuji za nákupasing the Monoprice 133833 Immersive Satellite Speakers. These speakers are designed to enhance your home cinema experience by providing multi-dimensional sound, fully compatible with standard and Dolby Atmos receivers. This manual provides essential information for the safe and optimal use of your new speakers.

2. Bezpečnostní informace

Před použitím tohoto výrobku si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Uschovejte si tento návod pro budoucí použití.

• Elektrická bezpečnost: Do not expose the speakers to water or moisture. Ensure all connections are secure before powering on your audio system.
• Umístění: Place speakers on a stable, level surface to prevent tipping. Avoid placing near heat sources or in direct sunlight.
• Větrání: Ensure adequate airflow around the speakers. Do not block ventilation openings.
• Čištění: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Servis: Nepokoušejte se tento výrobek opravovat sami. Veškerý servis svěřte kvalifikovanému personálu.
• Úrovně hlasitosti: Dlouhodobé vystavení vysokým úrovním hlasitosti může způsobit trvalé poškození sluchu. Při nastavování hlasitosti buďte opatrní.

3. Obsah balení

Please ensure all items are present and in good condition. If any items are missing or damaged, contact Monoprice customer support.

• 2x Monoprice 133833 Immersive Satellite Speakers
• 1x Uživatelská příručka (tento dokument)

4. Vlastnosti produktu

The Monoprice 133833 speakers are designed with advanced features for an enhanced audio experience:

• Pohlcující zvuk: Upward-firing drivers project sound towards the ceiling, which then reflects down into the listening area, creating a 3D audio space. This design is fully compatible with Dolby Atmos enabled receivers and audio tracks.
• Kompaktní velikost: Each speaker measures approximately 11.4 x 26.7 x 13.5 cm (4.5 x 10.5 x 5.3 inches) and weighs about 2.26 kg (5 lbs), making them suitable for various room setups.
• Vysoce kvalitní ovladače: Features a 3/4-inch aluminum dome tweeter and a 3-inch polypropylene woofer for clear highs and rich lows. An additional 3-inch polypropylene driver is used for the immersive height channel.
• Manipulace s energií: Capable of handling up to 100 watts of input power.
• Konektivita: Equipped with binding post connectors for secure and reliable speaker wire connections.

Obrázek 4.1: Přední strana view of a Monoprice 133833 Immersive Satellite Speaker, showing the main drivers and the upward-firing driver on top.

5. Nastavení

5.1 Umístění reproduktorů

For optimal immersive sound, place the speakers on top of your front left and right main speakers, or on a stable surface at the front of your listening area. Ensure the upward-firing drivers are unobstructed and facing the ceiling. The ceiling should be flat and reflective for the best effect.

Figure 5.1: A pair of Monoprice 133833 Immersive Satellite Speakers, designed for placement on existing speakers or stands.

5.2 Připojení reproduktorů

These speakers connect to your AV receiver's height channels (e.g., Front Height, Top Front, or Dolby Atmos Enabled Speaker outputs) using standard speaker wire. Each speaker features two sets of binding posts: one for the main drivers and one for the upward-firing immersive driver.

1. Identify the speaker wire terminals on your AV receiver for the height channels.
2. Prepare your speaker wires by stripping approximately 1/2 inch (1.2 cm) of insulation from the ends.
3. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the corresponding height channel on your receiver.
4. Connect the negative (-) terminal of the speaker to the negative (-) terminal of the corresponding height channel on your receiver.
5. Ensure all connections are tight and that there are no stray wire strands that could cause a short circuit.

Figure 5.2: Rear panel of the speaker, illustrating the dual binding post connections for the main and immersive drivers.

Note on Impedance: The speakers have an impedance of 8 Ohms. Ensure your receiver is compatible with this impedance. If your receiver has settings for speaker impedance, select the appropriate setting.

6. Návod k obsluze

Once connected, operate the speakers through your AV receiver. Refer to your receiver's manual for specific instructions on configuring height channels and Dolby Atmos settings.

• Konfigurace přijímače: Access your AV receiver's setup menu. Configure the speaker setup to include "Dolby Atmos Enabled Speakers" or "Front Height" speakers, depending on your receiver's options.
• Kalibrace: Use your receiver's automatic room calibration system (e.g., Audyssey, MCACC, YPAO) to optimize sound levels and delays for your listening environment.
• Source Material: For the full immersive experience, use audio content encoded with Dolby Atmos or DTS:X. The speakers will also enhance standard surround sound formats.

7. Údržba

These speakers require minimal maintenance to ensure long-lasting performance.

• Čištění: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
• Grily: The speaker grilles can be carefully removed for cleaning if necessary. Use a soft brush or vacuum cleaner with a brush attachment to remove dust.
• Prostředí: Avoid exposing the speakers to extreme temperatures, humidity, or direct sunlight, which can degrade materials over time.

Obrázek 7.1: Strana view of the speaker with its protective grille installed.

8. Řešení problémů

If you experience issues with your speakers, refer to the following troubleshooting guide:

9. Specifikace

Detailed technical specifications for the Monoprice 133833 Immersive Satellite Speakers:

10. Záruka a podpora

Monoprice stands behind its products with comprehensive warranty and support services.

• 1letá záruka na výměnu: This product is covered by a 1-year replacement warranty from the date of purchase.
• 30denní záruka vrácení peněz: If you are not completely satisfied with your purchase, you may return it within 30 days for a full refund.
• Zákaznická podpora: For technical assistance, warranty claims, or other inquiries, please visit the official Monoprice webnebo kontaktujte jejich oddělení zákaznických služeb.