Walfront 5V - 24V Motor Forward/Reverse Controller Instruction Manual

1. Konec produktuview

This document provides instructions for the Walfront 5V - 24V Motor Forward/Reverse Controller Board. This device is designed to control the direction and timing of DC motors within a specified voltage range. It features programmable delay times and multiple trigger modes for versatile applications.

The controller board integrates a relay for motor control and a digital display for settings and status indication.

Obrázek 1: Úhlové view of the Walfront Motor Forward/Reverse Controller Board.

2. Vlastnosti

• Constructed with a durable circuit board for extended operational life.
• Supports two input trigger modes: Low-Pulse trigger mode and Low-Level trigger mode.
• Includes three input control ports: Forward (FWD), Reverse (REV), and Stop (STOP).
• Dual power supply options: DC 6.5-25V or DC 5V (only one power supply should be connected at a time).
• Programmable delay times: 0.1-0.9 seconds, 1-9 seconds, and 1-9 minutes.

3. Specifikace

Figure 2: Controller board showing approximate dimensions.

4. Identifikace součásti

The controller board features various components for power input, motor control, and user interaction.

Obrázek 3: Přední a zadní strana views of the controller board. The front shows the digital display, control buttons (SET, ++, OK), and terminal blocks. The back shows the 'MADE IN CHINA' marking and circuit traces.

Klíčové komponenty:

• Digitální displej: Zobrazuje aktuální nastavení a stav.
• Control Buttons (SET, ++, OK): Used for configuring operating modes and delay times.
• Vstupní napájecí svorky: For connecting the DC 6.5-25V or DC 5V working power supply. Labeled VIN, GND.
• Control Input Terminals: For FWD (Forward), REV (Reverse), and STOP signals.
• Výstupní svorky motoru: For connecting the motor power (M+, M-) and motor (P+, P-).
• Relé: Two blue relays are visible, responsible for switching motor direction.

5. Nastavení a zapojení

Proper wiring is essential for the safe and correct operation of the motor controller. Ensure all power is disconnected before making any connections.

Figure 4: Wiring diagrams for the motor controller board, showing connections for working power and motor power.

1. Working Power Supply Connection:
   • Connect your DC 6.5-25V power supply to the VIN and GND terminals on the board.
   • Alternatively, connect a DC 5V power supply to the dedicated 5V input terminals. Do not connect both power supplies simultaneously.
2. Motor Power Supply Connection:
   • Connect your motor's power source (DC 1-110V or AC 85-265V) to the P+ and P- terminals. Ensure correct polarity for DC.
3. Připojení motoru:
   • Connect your DC motor to the M+ and M- terminals.
4. Control Signal Connections (Optional):
   • Connect external control signals to the FWD (Forward), REV (Reverse), and STOP terminals as required by your application. These inputs typically respond to low-pulse or low-level triggers.

Caution: Incorrect wiring can damage the board or connected components. Always double-check connections before applying power.

6. Návod k obsluze

The controller offers various modes and programmable delay settings. The digital display shows the current mode or time value, and the SET, ++, and OK buttons are used for configuration.

6.1 Režimy spouštění

The board supports two primary input trigger modes:

• Low-Pulse Trigger (Falling Edge): The controller reacts to a momentary transition from high to low voltage on the control input.
• Low-Level Trigger (Rising Edge): The controller reacts to a sustained low voltage level on the control input.

Refer to the product documentation or specific mode settings for how to select between these trigger types.

6.2 Řídicí porty

The three control ports allow for external command of motor direction and state:

• FWD (vpřed): Activates the motor in the forward direction.
• REV (zpátečka): Activates the motor in the reverse direction.
• ZASTÁVKA: Halts the motor operation.

6.3 Nastavení časů zpoždění

The controller allows for programming delay times in three ranges: 0.1-0.9 seconds, 1-9 seconds, and 1-9 minutes. The exact programming steps may vary depending on the specific firmware version. Generally, the process involves:

1. Stisknutím tlačítka SOUBOR tlačítko pro vstup do programovacího režimu.
2. Pomocí ++ button to adjust the time value or select a parameter.
3. Stisknutím tlačítka OK button to confirm the selection or save the setting.

Consult the specific mode diagrams or a detailed programming guide for your module to understand the sequence for setting each parameter and delay range.

7. Údržba

To ensure the longevity and reliable operation of your Walfront Motor Forward/Reverse Controller, follow these general maintenance guidelines:

• Čištění: Keep the board clean and free from dust, dirt, and moisture. Use a soft, dry cloth to gently wipe the surface. Avoid using liquid cleaners or solvents.
• Skladování: Store the controller in a dry, cool environment away from direct sunlight and extreme temperatures.
• Spojení: Pravidelně kontrolujte všechna zapojení, abyste se ujistili, že jsou bezpečná a bez koroze. Uvolněná spojení mohou vést k přerušovanému provozu nebo poškození.
• Podmínky prostředí: Operate the board within its specified temperature and humidity ranges to prevent damage.

8. Řešení problémů

If you encounter issues with your motor controller, consider the following troubleshooting steps:

• Bez napájení/Vypnutí displeje:
  • Verify that the power supply is connected correctly to the VIN/GND or 5V terminals.
  • Zajistěte napájení objtage is within the specified range (DC 6.5-25V or DC 5V).
  • Check for any loose wires or damaged power cables.
• Motor nereaguje:
  • Confirm that the motor is correctly wired to the M+ and M- terminals.
  • Check the motor's power supply connection (P+, P-) and ensure it is providing the correct voltage (DC 1-110V or AC 85-265V).
  • Verify that the control signals (FWD, REV, STOP) are being applied correctly according to the selected trigger mode.
  • Ensure the relay is clicking, indicating it is attempting to switch.
• Nesprávný směr otáčení motoru:
  • Check the motor wiring to M+ and M-. Swapping these connections will reverse the motor's default direction.
  • Ensure the FWD and REV control signals are being applied as intended.
• Problémy s načasováním:
  • Re-enter the programming mode and verify that the delay time settings are configured as desired.
  • Ensure the correct time unit (seconds, minutes) is selected if applicable.

Pokud problémy přetrvávají i po provedení těchto kroků, obraťte se na zákaznickou podporu s žádostí o další pomoc.

9. Záruka a podpora

Walfront products are designed for reliability and performance. For specific warranty information, please refer to the product packaging or the official Walfront website. In case of technical issues or questions not covered in this manual, please contact Walfront customer support through their official channels. When contacting support, please have your product model number (Walfrontnsrgqdi1xg) and purchase details ready.