SCHNEIDER MGU3.031.18

SCHNEIDER ASFORA 2P Anthracite Socket Instruction Manual

Model: MGU3.031.18

1. Přesview

This manual provides instructions for the installation, operation, and maintenance of the SCHNEIDER ASFORA 2P Anthracite Socket, model MGU3.031.18. This product is designed for residential and commercial electrical installations, offering a reliable power connection point.

Přední view of the SCHNEIDER ASFORA 2P Anthracite Socket

Přední view of the SCHNEIDER ASFORA 2P Anthracite Socket, showing the two-pole configuration and anthracite finish.

Kompatibilita: This socket is designed to be associated with ASFORA 1-gang, 2-gang, or 3-gang faceplates (sold separately).

2. Bezpečnostní informace

VAROVÁNÍ: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow these safety guidelines:

  • Always disconnect power to the circuit at the main breaker or fuse box before beginning any installation, maintenance, or troubleshooting.
  • Ověřte, zda je napájení vypnuté, pomocí regulátoru hlasitosti.tage testeru, než se dotknete jakýchkoli vodičů.
  • Instalaci by měl provést kvalifikovaný elektrikář v souladu se všemi národními a místními elektrotechnickými předpisy.
  • Do not install or use if the product appears damaged.
  • Ujistěte se, že všechna vodičová spojení jsou bezpečná a řádně izolovaná.
  • Tento výrobek je určen pouze pro vnitřní použití.

3. Obsah balení

  • 1 x SCHNEIDER ASFORA 2P Anthracite Socket (Model MGU3.031.18)

4. Instalace

Požadované nástroje: Screwdriver (flat-head and/or Phillips), wire strippers, voltage tester.

Před instalací:

  • Vypněte napájení obvodu na hlavním elektrickém panelu.
  • Použijte svtage tester to confirm that the power is off at the outlet box.

Kroky instalace:

  1. Carefully remove the existing socket or blank cover from the electrical box.
  2. Prepare the wires by stripping approximately 10-12mm of insulation from the ends.
  3. Connect the wires to the appropriate terminals on the new SCHNEIDER socket. Typically:
    • Live (brown or red) wire to the 'L' terminal.
    • Neutral (blue or black) wire to the 'N' terminal.
    • Earth (green/yellow) wire to the 'E' or ground terminal (if applicable).
    Ensure connections are tight and no bare wire is exposed outside the terminals.
  4. Gently fold the wires into the electrical box and secure the socket to the box using the provided mounting screws.
  5. Attach the ASFORA faceplate (not included) over the socket, ensuring it clicks securely into place.
  6. Restore power to the circuit at the main electrical panel and test the socket with a known working appliance.

Poznámka: If you are unsure about any part of the installation process, it is highly recommended to consult a qualified electrician to ensure safety and compliance with local electrical codes.

5. Provoz

Once properly installed and powered, the SCHNEIDER ASFORA 2P Anthracite Socket functions as a standard electrical outlet. Simply insert a compatible plug into the socket to draw power for your appliances.

6. Údržba

  • Čištění: Disconnect power before cleaning. Clean the surface of the socket with a dry, soft cloth. Do not use abrasive cleaners, solvents, or liquids, as these can damage the finish or internal components.
  • Inspekce: Periodically inspect the socket for any signs of physical damage, discoloration, or loose connections. If any issues are observed, disconnect power immediately and consult a qualified electrician for repair or replacement.

7. Řešení problémů

  • No Power from Socket:
    • Check the circuit breaker or fuse for the affected circuit. Reset if tripped.
    • Ensure the wires are securely connected to the socket terminals. (VAROVÁNÍ: Před kontrolou zapojení odpojte napájení).
    • Test the socket with a different appliance to rule out appliance malfunction.
    • Pokud problém přetrvává, obraťte se na kvalifikovaného elektrikáře.
  • Loose Plug Connection:
    • If plugs feel loose in the socket, it may indicate wear. Disconnect power and inspect the socket. If necessary, replace the socket.

8. Specifikace

ZnačkaSCHNEIDER
Číslo modeluMGU3.031.18
BarvaAntracit
MateriálPlast
Typ dokončeníHovado
Typ instalaceZašroubovat
Rozměry produktu (D x Š x V)2.54 x 2.54 x 2.54 cm
Hmotnost položky294.84 gramů
Jsou vyžadovány baterieŽádný

9. Záruka a podpora

For detailed warranty information, technical support, or to inquire about spare parts, please refer to the official SCHNEIDER website or contact their customer service department. It is advisable to keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.