Franke Kubus 2 KNG 110-37 Fragranite Kitchen Sink Instruction Manual

1. Úvod

Thank you for choosing the Franke Kubus 2 KNG 110-37 Fragranite Kitchen Sink. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new sink. Please read these instructions carefully before beginning installation and retain them for future reference.

The Franke Kubus 2 KNG 110-37 is a single bowl, rectangular undermount sink crafted from durable Fragranite, designed for modern kitchens. Its robust construction ensures long-lasting performance and aesthetic appeal.

2. Bezpečnostní informace

• Během instalace vždy používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
• Ensure all water supply lines are turned off before beginning any plumbing work.
• Handle the sink with care to avoid damage or injury. Fragranite sinks are heavy.
• Pokud si nejste jisti jakoukoli částí instalace, poraďte se s kvalifikovaným instalatérem nebo profesionálním instalatérem.
• Do not use harsh chemicals or abrasive cleaners on the sink surface, as this may damage the Fragranite material.

3. Obsah balení

Please check that all components are present and undamaged before proceeding with installation. The package should typically include:

• Franke Kubus 2 KNG 110-37 Fragranite Sink
• Drain assembly (grid type)
• Mounting clips and fasteners for undermount installation
• Instalační šablona (pokud je k dispozici)

Note: Additional plumbing components such as P-trap, faucet, and sealant are typically sold separately.

4. Nastavení a instalace

The Franke Kubus 2 KNG 110-37 sink is designed for undermount installation. Accurate measurements and proper sealing are crucial for a successful installation.

4.1. Rozměry a výřez

Refer to the technical drawing below for precise dimensions required for countertop cutout and sink placement. Ensure the cutout is made according to the provided template or the exact dimensions specified.

Figure 1: Franke Kubus 2 KNG 110-37 Sink Dimensions. This diagram illustrates the top-down view of the sink with key measurements in millimeters. The overall width is 410mm, and the overall depth is 460mm. The internal bowl width is 370mm, and the internal bowl depth is 420mm. The corner radius is R10. The drain opening is centrally located. These dimensions are critical for accurate countertop cutting and installation.

• Celkové rozměry: Approximately 410mm (W) x 460mm (D)
• Rozměry misky: Approximately 370mm (W) x 420mm (D)
• Poloměr rohu: R10
• Typ instalace: Rozpojit

4.2. Kroky instalace (obecné)

1. Příprava pracovní desky: Ensure the countertop cutout matches the sink dimensions. The edges should be smooth and clean.
2. Naneste tmel: Naneste souvislou housenku silikonového tmelu kolem okraje dřezu v místě, kde se bude dotýkat spodní strany pracovní desky.
3. Pozice dřezu: Carefully lift and position the sink underneath the countertop cutout, aligning it correctly.
4. Zajištění pomocí klipů: Attach the provided mounting clips to the sink rim and tighten them against the underside of the countertop. Ensure even pressure to create a watertight seal.
5. Instalace odtokové sestavy: Install the grid drain assembly into the sink's drain opening, following the manufacturer's instructions for the drain kit. Use plumber's putty or sealant as required to ensure a watertight seal.
6. Připojení instalatérství: Connect the drain assembly to your household plumbing (P-trap, waste pipe). Ensure all connections are tight and leak-free.
7. Vytvrzovací tmel: Allow the silicone sealant to cure completely according to the sealant manufacturer's instructions before using the sink.

5. Provoz

The Franke Kubus 2 KNG 110-37 sink is designed for everyday kitchen use. Operate your sink by controlling water flow and temperature via your installed faucet. The grid drain type is designed to efficiently manage water drainage while preventing larger debris from entering the plumbing system.

• Ensure the drain is clear of obstructions for optimal water flow.
• Avoid pouring extremely hot liquids (e.g., boiling oil) directly into the sink without running cold water, as extreme temperature changes can potentially affect the material over time.

6. Údržba a péče

Proper care will help maintain the appearance and longevity of your Franke Fragranite sink. Fragranite is a durable material, but regular cleaning is recommended.

• Denní úklid: Wipe the sink with a soft cloth and warm soapy water after each use. Rinse thoroughly with clean water and wipe dry to prevent water spots and mineral buildup.
• Odolné skvrny: For more stubborn stains, use a non-abrasive liquid cleaner specifically designed for composite sinks. Apply with a soft sponge, rub gently, then rinse thoroughly and dry.
• Vyhněte se: Do not use abrasive cleaners, scouring pads, steel wool, strong acids, alkalis, or harsh chemical drain cleaners, as these can damage the Fragranite surface.
• Tepelná odolnost: While Fragranite is highly heat resistant, it is advisable to use a trivet or heat pad for extremely hot pots and pans to prevent potential thermal shock or discoloration over prolonged exposure.
• Prevence poškrábání: Although durable, avoid dragging heavy or sharp objects across the sink surface to prevent scratches.
• Péče o odtok: Regularly clean the grid drain to remove food particles and debris, ensuring efficient drainage and preventing odors.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

Franke products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Franke webmísto.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Franke customer support. Contact information can typically be found on the Franke webwebu nebo v dokumentaci k produktu.

Franke Official Webmísto: www.franke.com