Dehetamps TR2 P Remote Control Car Alarm User Manual

1. Úvod

Taramps TR2 P Remote Control is an advanced device designed exclusively for Taramps Group alarm systems. It incorporates anti-cloning (hopping code) technology to provide enhanced security for your vehicle. This remote control also features a presence function and a home function, allowing for the activation of automated gates. Built for durability, it is resistant to moisture infiltration and includes a long-lasting lithium battery with a low battery indicator.

Figure 1: Taramps TR2 P Remote Control. This image shows the front view of the remote control, highlighting its four primary function buttons and the LED indicator.

2. Klíčové vlastnosti

• Anti-Cloning Technology: Utilizes HOPPING CODE for enhanced security against unauthorized duplication.
• Kompatibilita: Fully compatible with all Taramps TW20 series alarm systems.
• Provozní frekvence: Operates at 433.92 MHz.
• LED indikátor: Features a blue LED for status indication.
• Odolná konstrukce: Manufactured from high-density ABS material.
• Voděodolnost: Designed to be resistant to moisture infiltration.
• Baterie: Powered by a CR2032 Lithium 3V battery, known for its long durability.
• Presence Function: Identified by its gray color, this function is integral to the alarm system's presence feature.
• Domácí funkce: Allows for the activation of automated gates.

3. Nastavení

3.1 Instalace baterie

The TR2 P remote control comes with a CR2032 lithium battery pre-installed. If replacement is needed, follow these steps:

1. Opatrně otevřete kryt dálkového ovladače casing using a small, flat tool.
2. Vyjměte starou baterii CR2032.
3. Vložte novou 3V lithiovou baterii CR2032 a ujistěte se, že kladná (+) strana směřuje nahoru.
4. Zavřete dálkový ovladač casing bezpečně zacvakněte.

3.2 Pairing with Taramps TW20 Alarm System

To ensure proper functionality, the TR2 P remote control must be paired with your Taramps TW20 alarm system. Refer to your specific Taramps TW20 alarm system manual for detailed pairing instructions, as the procedure may vary slightly between alarm models. Generally, the process involves:

1. Entering the alarm system's programming mode (often by turning the ignition on/off a specific number of times or pressing a master button).
2. Pressing a button on the TR2 P remote control when prompted by the alarm system.
3. Confirming successful pairing (usually indicated by a siren chirp or LED flash from the alarm system).

4. Návod k obsluze

The TR2 P remote control features four primary buttons for various functions:

• House Icon Button (⌂): Aktivuje Funkce Home, typically used for controlling automated gates or other integrated home automation features.
• Locked Padlock Icon Button (🔒): Locks the vehicle and arms the alarm system. Press this button to secure your vehicle.
• Unlocked Padlock Icon Button (🔓): Unlocks the vehicle and disarms the alarm system. Press this button to access your vehicle.
• Asterisk Icon Button (*): This button is typically associated with the Funkce přítomnosti or other auxiliary functions depending on your alarm system's configuration. Consult your alarm system manual for specific details.

The blue LED indicator on the remote control will illuminate briefly when a button is pressed, confirming signal transmission.

5. Údržba

5.1 Výměna baterie

The TR2 P remote control is powered by a CR2032 3V lithium battery. The remote control will indicate a low battery condition, prompting replacement. Refer to section 3.1 for battery installation instructions.

5.2 Čištění a péče

• Dálkový ovladač čistěte měkkým, suchým hadříkem.
• Avoid using abrasive cleaners or solvents, as these can damage the casing and buttons.
• While resistant to moisture, avoid prolonged exposure to water or submerging the device.

6. Řešení problémů

• Dálkové ovládání nereaguje:
  • Check if the blue LED illuminates when a button is pressed. If not, the battery may be depleted. Replace the CR2032 battery (see section 3.1).
  • Ensure you are within range of the alarm system.
  • Verify that the remote control is properly paired with your Taramps TW20 alarm system (see section 3.2).
• Přerušovaný provoz:
  • Weak battery can cause intermittent operation. Replace the battery.
  • Environmental interference might affect signal transmission. Try operating the remote from a different location.
• Alarm System Not Responding to Home Function:
  • Ensure the automated gate receiver is powered on and within range.
  • Verify that the Home Function is correctly programmed and linked to your automated gate system. Consult the gate system's manual or a professional installer.

7. Specifikace

8. Informace o záruce

Taramps TR2 P Remote Control comes with a 2-letá záruka. This warranty is provided directly by the manufacturer, Taramps Electronics, and is valid for 24 months from the date of product purchase. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the included Warranty Certificate.

9. Podpora

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Taramps customer support. Refer to the contact information provided on the product packaging or the official Taramps webmísto.

Dehetamps Official Webmísto: www.taramps.com.br