Waytronic Powersound V1 PIR senzor pohybu hlasový programovatelný reproduktor uživatelská příručka

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker. Please read this manual thoroughly before using the device to ensure proper function and safety.

Bezpečnostní informace

• Ensure the power supply matches the device's requirements (DC12V).
• Toto zařízení je není vodotěsný. Avoid exposure to rain, moisture, or any liquids.
• Nepokoušejte se zařízení rozebírat ani opravovat sami. Veškerý servis svěřte kvalifikovanému personálu.
• Chraňte zařízení před extrémními teplotami a přímým slunečním zářením.
• Install the device securely to prevent it from falling.

Konec produktuview

The Waytronic Powersound V1 is a wall-mountable PIR motion sensor speaker designed to play custom audio files upon motion detection. It features a sensitive sensor, a built-in 10W loudspeaker, and supports audio file updates via USB or SD card.

Figure 1: Waytronic Powersound V1 PIR Motion Sensor Speaker with included power adapter.

Komponenty a vlastnosti:

• PIR Motion Sensor: Detects movement within approximately 16 feet (5 meters) and triggers audio playback.
• Vestavěný reproduktor: 10W loudspeaker for clear audio output.
• USB rozhraní: For connecting a USB flash drive to transfer audio files.
• Slot pro SD kartu: For inserting an SD card (max 2GB) to play audio directly or transfer files.
• Ovládání hlasitosti: Buttons for adjusting playback volume.
• Režimy přehrávání: Supports single cycle or sequential playback of audio files.

Obrázek 2: Strana view of the device showing the Infrared Indicator Light, SD card slot, USB interface, and control buttons (Previous/A, Next/B, Volume+/C, Volume-/L).

Nastavení

1. Montáž zařízení

• The Powersound V1 is designed for wall mounting.
• Choose a location where the motion sensor has an unobstructed view požadované oblasti detekce.
• Consider installing it on the top of a wall or discreetly behind an object like a tree in a covered outdoor area, ensuring it is protected from moisture.
• Secure the device using appropriate mounting hardware (not included).

2. Připojení napájení

• Connect the provided DC12V power adapter to the device's power input port.
• Zapojte napájecí adaptér do standardní elektrické zásuvky. Zařízení se automaticky zapne.

3. Customizing Audio Files

The device supports MP3 audio files. You can update audio files using either a USB flash drive or an SD card.

Figure 3: Close-up of the USB port and SD card slot for audio file řízení.

Using a USB Flash Drive:

1. Format your USB flash drive to FAT32. (Note: NTFS format may cause transfer issues).
2. Copy your desired MP3 audio files do kořenového adresáře USB flash disku.
3. Insert the USB flash drive into the USB interface on the device.
4. Stiskněte a podržte V+/C button. The device should automatically begin copying files to its internal memory. The red indicator light may blink during this process.
5. Once the transfer is complete, remove the USB flash drive.

Using an SD Card:

1. Copy your desired MP3 audio files to a standard SD card (maximum 2GB).
2. Insert the SD card into the SD card slot on the device.
3. The device can play audio filepřímo z SD karty.

Návod k obsluze

1. Motion Detection and Playback

• Once powered on and with audio files loaded, the device will enter standby mode.
• When the PIR motion sensor detects movement within its range (approximately 16 feet), it will trigger the playback of the stored audio files.
• The audio can be heard up to 100 feet (30 meters) away.

Figure 4: Illustration of the motion sensor detecting movement and triggering sound playback.

2. Režimy přehrávání

The device supports two main playback modes:

• Single Cycle Playback: Plays one audio file and then stops until motion is detected again.
• Order Playback (Sequential): Přehrává zvuk files in sequence. After playing the last file, it will loop back to the first.

Specific instructions for switching between these modes are typically found in the device's internal programming or may be controlled by the order of files on the SD card/USB drive. Refer to the manufacturer's specific guidance if available.

3. Nastavení hlasitosti

• Použijte V+/C tlačítko pro zvýšení hlasitosti.
• Použijte V-/L tlačítko pro snížení hlasitosti.
• The device offers multiple volume levels.

Údržba

• Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
• Skladování: Pokud zařízení delší dobu nepoužíváte, odpojte napájecí adaptér a uložte jej na chladném a suchém místě.
• Ochrana životního prostředí: As the device is not waterproof, ensure it is always protected from rain and high humidity, especially if used in outdoor settings.

Odstraňování problémů

Specifikace

Záruka a podpora

Informace o záruce

The Waytronic Powersound V1 comes with a Plná záruka. For specific terms and conditions, please refer to the warranty card included with your product or contact Waytronic customer service.

Zákaznická podpora

If you encounter any issues or have questions not covered in this manual, please contact Waytronic customer service. You can often find contact information on the product packaging, the official Waytronic webwebu nebo prostřednictvím vaší nákupní platformy.

When contacting support, please have your product model (Powersound V1) and purchase details ready.