MXR M228

Návod k obsluze kytarového kompresorového efektového pedálu MXR M228 Dyna Comp Deluxe

Model: M228

Značka: MXR

Zavedení

The MXR M228 Dyna Comp Deluxe Compressor brings enhanced control to the classic compression sound. This pedal is designed to shape and refine your guitar tone, offering both vintage and modern compression characteristics. Its circuitry is built around the CA3080 "metal can" integrated circuit, known for its quiet operation, transparency, and dynamic range.

Nastavení

Požadavky na napájení

The Dyna Comp Deluxe operates on a 9V AC power adapter. Ensure the adapter is compatible with the pedal's power input. The power input jack is located on the side of the pedal.

Napájecí adaptér 9 V AC

Obrázek 1: A standard 9V AC power adapter, used to power the MXR Dyna Comp Deluxe pedal.

Připojení pedálu

Připojte svou kytaru k VSTUP konektoru na pravé straně pedálu pomocí standardního 6 mm kabelu. Připojte VÝSTUP zvedák na levé straně pedálu k vašemu amplifier nebo další pedál v signálovém řetězci pomocí dalšího 6 mm kabelu.

Strana view of MXR Dyna Comp Deluxe showing input, output, and power jacks

Obrázek 2: Strana view of the MXR Dyna Comp Deluxe pedal, illustrating the input, output, and 9V power jacks.

Instalace baterie (volitelné)

To install a 9V battery, remove the four screws on the bottom plate of the pedal. Carefully lift the bottom plate to access the battery compartment. Connect a 9V battery to the clip and place it inside the compartment. Replace the bottom plate and secure the screws.

Dno view of MXR Dyna Comp Deluxe pedal with four screws visible

Obrázek 3: Dno view of the MXR Dyna Comp Deluxe pedal, showing the four screws that secure the battery compartment cover.

Operating the Dyna Comp Deluxe

The Dyna Comp Deluxe features several controls to fine-tune your compression. Experiment with each knob and switch to find the sound that best suits your playing style.

Nahoru view of MXR Dyna Comp Deluxe pedal with all controls labeled

Obrázek 4: Nahoru view of the MXR Dyna Comp Deluxe pedal, highlighting the control knobs and switches.

Ovládání:

  • VÝSTUP: Controls the overall volume level of the compressed signal.
  • CITLIVOST: Adjusts the length of sustain. Higher sensitivity results in longer sustain.
  • ČISTÝ: Blends your unaffected (dry) signal with the compressed signal. This allows for a balanced mix, preserving some of your original tone while benefiting from compression.
  • TÓN: Refines the character of the compressed signal, allowing you to brighten or darken the effect to your preference.
  • Přepínač ATTACK: Toggles between two attack times:
    • Vintage (Slow Attack): Provides a more traditional, percussive compression feel.
    • Modern (Fast Attack): Offers a quicker response, suitable for contemporary playing styles.

Pochopení komprese:

A compressor pedal reduces the dynamic range of your guitar signal. It makes louder notes quieter and quieter notes louder, resulting in a more even and sustained sound. This can be particularly useful for balancing dynamics when switching between loud chords and softer single-note lines.

1 video: A demonstration of the MXR Dyna Comp Deluxe Compressor M228, showcasing its clean funk tones and control over dynamics.

2 video: Konecview of the MXR Dyna Comp Deluxe Compressor M228, demonstrating its features and sound.

3 video: An informational video explaining the function and application of a compression pedal in general.

Údržba

  • Čištění: K čištění pedálu používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Skladování: Store the pedal in a dry environment, away from extreme temperatures or humidity.
  • Spojení: Periodically check all cables and connections for wear and tear to ensure optimal performance.

Odstraňování problémů

  • Žádný zvuk:
    • Zkontrolujte všechna kabelová připojení (vstup, výstup, napájení).
    • Ensure the power adapter is correctly connected and functioning, or that the 9V battery is fresh and properly installed.
    • Ověřte si, zda vaše kytara a ampZáchranné ventily fungují správně, protože se obejdou pedály.
  • Nežádoucí šum/hučení:
    • Ujistěte se, že všechny kabely jsou řádně stíněné a v dobrém stavu.
    • Try using a different power supply to rule out power-related noise.
    • Move the pedal away from other electronic devices that might cause interference.
  • Efekt není poutavý:
    • Press the footswitch firmly to ensure it engages. The LED indicator should light up when the effect is active.
    • Check the 'Clean' knob setting; if it's fully clockwise, you might be hearing mostly the dry signal.

Specifikace

Číslo modeluM228
ZnačkaMXR
Hmotnost položky11.8 unce (0.74 libry)
Rozměry produktu5.5 x 4.5 x 2.5 palce
Hardwarové rozhraní1/4palcový zvuk
Formát signáluAnalogový
Zdroj napájeníAdaptér
svtage9 voltů
BarvaČervený

Záruka a podpora

For detailed warranty information and customer support, please refer to the official MXR webnebo se obraťte na autorizovaného prodejce. Uschovejte si doklad o koupi pro případné reklamace.

© 2023 MXR. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.