be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case User Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Dark Base PRO 900 Rev. 2 Full Tower ATX PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your product.

The Dark Base PRO 900 Rev. 2 is designed for high-end systems and offers exceptional flexibility, silent operation, and advanced cooling capabilities. Its modular design allows for various configurations to suit your specific needs.

Bezpečnostní informace

• Před instalací nebo demontáží jakýchkoli součástí vždy odpojte napájecí kabel ze zásuvky.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Uchovávejte malé díly a obalové materiály mimo dosah dětí.
• Do not attempt to open or repair the case or its components yourself. Refer to qualified service personnel.
• Zajistěte dostatečné větrání kolem skříně počítače, abyste zabránili přehřátí.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny níže uvedené komponenty:

• be quiet! Dark Base PRO 900 Rev. 2 PC Case
• Accessory box with screws, cable ties, and other mounting hardware
• Uživatelská příručka
• RGB LED strips (pre-installed or included separately)
• Additional fan mounting brackets (if applicable)

Nastavení

1. Příprava případu

Place the case on a stable, flat surface. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels backward. The tempered glass side panel should be handled with extreme care.

Obrázek: Interiér view of the Dark Base PRO 900 Rev. 2, illustrating the internal layout for component installation.

2. Instalace základní desky

The motherboard tray is removable and can be inverted for an inverse layout. To remove, unscrew the mounting screws and slide the tray out. Install your ATX, E-ATX, or XL-ATX motherboard onto the tray using the provided standoffs and screws. Ensure the I/O shield is installed in the case before re-inserting the motherboard tray.

3. Instalace napájecího zdroje (PSU)

Install the PSU from the rear of the case. Secure it with the provided screws. Ensure all necessary cables are routed through the designated cutouts for efficient cable management.

4. Instalace disku (HDD/SSD)

The case features modular HDD slots. Each HDD cage can be repositioned or removed. Install 3.5-inch HDDs into the drive cages using the anti-vibration grommets and screws. 2.5-inch SSDs can be mounted directly onto the HDD trays or dedicated SSD mounts behind the motherboard tray.

5. Grafická karta a rozšiřující karty

Remove the necessary PCIe slot covers. Insert your graphics card and other expansion cards into the motherboard's PCIe slots and secure them with screws.

6. Instalace ventilátoru a chladiče

The case comes with three pre-installed Silent Wings 3 PWM fans. Additional fans or radiators up to 420mm can be installed in various positions (front, top, rear, bottom). Refer to the fan controller section for connecting fans.

Image: Front of the Dark Base PRO 900 Rev. 2 with the door open, showing fan mounts and dust filter access.

7. Správa kabelů

Utilize the numerous cable routing cutouts and Velcro straps behind the motherboard tray to manage cables. This improves airflow and aesthetics.

Návod k obsluze

1. Zapnutí

After all components are installed and connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button located on the top I/O panel to start your system.

Image: Top I/O panel of the Dark Base PRO 900 Rev. 2, highlighting the power button and connectivity options.

2. Ovládání ventilátoru

The case features a stepless dual-rail fan controller, switchable between Silence and Performance modes. Use the fan controller switch on the top I/O panel to adjust fan speeds according to your preference for noise or cooling performance.

3. RGB LED Illumination

The integrated RGB LED illumination can be controlled via a dedicated button on the top I/O panel or synchronized with compatible motherboard software. Cycle through various colors and lighting effects to customize your system's appearance.

Údržba

1. Čištění prachového filtru

The Dark Base PRO 900 Rev. 2 includes easily removable dust filters at the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case. Simply slide them out, clean with water or a soft brush, and re-insert once dry.

2. Generální úklid

Použijte měkký, damp cloth to clean the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

Odstraňování problémů

• Systém se nezapíná:
  • Ensure the PSU is properly connected to the wall outlet and switched on.
  • Zkontrolujte všechna napájecí připojení k základní desce a jejím součástem.
  • Ověřte, zda je kabel tlačítka napájení na předním panelu správně připojen k základní desce.
• Ventilátory se netočí:
  • Check fan connections to the fan controller or motherboard headers.
  • Ensure the fan controller is set to an appropriate speed mode (not off, if applicable).
• RGB LEDs Not Working:
  • Verify RGB strip connections to the case's RGB controller or motherboard.
  • Pokud používáte software základní desky, ujistěte se, že je správně nainstalován a nakonfigurován.
• Nadměrný hluk:
  • Check if fan speeds are set too high; adjust using the fan controller.
  • Ensure all screws are tightened to prevent vibrations.
  • Clean dust filters and fans to remove obstructions.

Specifikace

Záruka a podpora

Informace o záruce

Na tento produkt se vztahuje a 3letá záruka výrobce from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

Zákaznická podpora

For technical assistance, troubleshooting, or warranty inquiries, please visit the official be quiet! webwebu nebo se přímo obraťte na jejich zákaznickou podporu.

Oficiální Webmísto: www.bequiet.com