Feit Electric 30 watts 1 lights LED Wall Pack
Feit Electric 30W LED Wall Pack Instruction Manual
Model: 30 watts 1 lights LED Wall Pack
Zavedení
Thank you for choosing the Feit Electric 30 watts 1 lights LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting. This manual contains important information regarding the installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and retain it for future reference.
Bezpečnostní informace
Při instalaci a provozu elektrických výrobků vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.
- Před instalací nebo servisem vypněte napájení jističem.
- Ensure all connections are made correctly and securely.
- This product is designed for outdoor use and is UL rated for wet locations.
- Nepokoušejte se svítidlo upravovat. Jakékoli úpravy mohou vést ke ztrátě záruky a k ohrožení bezpečnosti.
- Pokud si nejste jisti postupem instalace, poraďte se s kvalifikovaným elektrikářem.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Feit Electric 30W LED Wall Pack Fixture
- Montážní materiál (šrouby, matice)
- Návod k použití

Image: The Feit Electric 30W LED Wall Pack shown in its retail packaging, indicating the 'PROSERIES' line and key features like 'Bronze Finish', '30W | 3200 Lumens', and '5000K Daylight'.
Instalace
This fixture is designed for universal 120-277V AC operation. Ensure power is OFF at the circuit breaker before proceeding.
- Příprava zapojení: Ujistěte se, že je elektrická krabice bezpečně namontována a kabeláž je přístupná.
- Montáž: Secure the fixture to the mounting surface using the provided hardware. The bronze die-cast aluminum housing is IP65 rated, protecting it from water jets and dust ingress.
- Elektrické připojení: Connect the fixture wires to the supply wires using appropriate wire nuts. Connect the black fixture wire to the live (hot) wire, the white fixture wire to the neutral wire, and the green/ground fixture wire to the ground wire.
- Bezpečné upevnění: Once wiring is complete, carefully push the fixture back against the mounting surface and secure it with the remaining screws.
- Optional Photocell Control: The fixture includes ½ inch threaded knockouts for maximum mounting versatility or the addition of a ½ inch photocell control (not included).

Obrázek: Detailní boční pohled view of the Feit Electric 30W LED Wall Pack, showcasing its bronze die-cast aluminum housing and the textured borosilicate glass lens.
Nastavení
After installation, restore power at the circuit breaker. The LED wall pack will illuminate immediately. No further setup is required unless an external photocell or timer is connected.
Návod k obsluze
The Feit Electric 30W LED Wall Pack operates automatically when power is supplied. If connected to a switch, simply toggle the switch to turn the light on or off. If a photocell is installed, the light will automatically turn on at dusk and off at dawn.
Údržba
The LED wall pack is designed for long-term, maintenance-free operation. The borosilicate glass lens ensures long life durability with no fading. To clean the fixture, ensure power is off and wipe the surface with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Zařízení není napájeno. | Check circuit breaker and wall switch. Ensure all wire connections are secure. |
| Světlo bliká. | Uvolněné připojení kabeláže. | Turn off power and re-check all wire connections. |
| Light stays on during the day (with photocell). | Fotobuňka je zakrytá nebo vadná. | Ensure photocell is not covered. If issue persists, replace photocell. |
Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Feit Electric |
| Model | 30 watts 1 lights LED Wall Pack |
| Spotřeba energie | 30 wattů |
| Lumen výstup | 3200 XNUMX lumenů |
| Teplota barev | 5000 K (denní světlo) |
| Index podání barev (CRI) | 80 CRI |
| Average Hours | 50,000 hodiny |
| Materiál bydlení | Litý hliník |
| Materiál stínidla | Shatter-resistant Glass (Borosilicate) |
| Hodnocení ochrany proti vniknutí (IP). | IP65 (Protected from water jets and dust ingress) |
| svtage | Universal 120-277V AC |
| Dimensions (H x W x E) | 10-13/16" x 9-7/8" x 9-13/16" |
| Hmotnost produktu | 6.45 libry |
| Certifikace | UL Rated for Wet Locations |
Záruka a podpora
Feit Electric products are manufactured to the highest quality standards. For warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Feit Electric webwebu. Uschovejte si prosím účtenku jako doklad o koupi.