Aerocool VERKHO3PLUS CPU Cooler User Manual

1. Konec produktuview

The Aerocool VERKHO3PLUS is a high-performance CPU cooler designed to efficiently dissipate heat from your computer's processor. It features a 120mm fan, advanced Heat Core Touch Technology (HCTT), and three copper heatpipes to ensure optimal thermal performance for a wide range of desktop CPUs.

Klíčové vlastnosti:

• Efficient heat dissipation with 3 copper heatpipes.
• Equipped with a 120mm fan for effective airflow.
• Features HCTT (Heat Core Touch Technology) for direct CPU contact.
• Hydraulic bearings and an aluminum base for superior cooling and durability.
• 4-Pin PWM technology for precise fan speed control.

An image showing the Aerocool VERKHO3PLUS CPU cooler. It features a large blue fan mounted on a black frame, attached to an aluminum heatsink with three visible copper heatpipes extending from the base.

2. Bezpečnostní informace

Please read and understand all safety instructions before installing or operating the Aerocool VERKHO3PLUS CPU cooler. Failure to do so may result in personal injury or damage to your system components.

• Před instalací nebo údržbou vždy odpojte počítač od napájení.
• Handle the cooler and other components with care to avoid damage.
• Ensure proper grounding to prevent electrostatic discharge (ESD).
• Uchovávejte mimo dosah dětí.
• Do not attempt to modify the cooler or its components.
• Ensure adequate ventilation within your PC case for optimal performance and safety.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Aerocool VERKHO3PLUS CPU Cooler Unit (Heatsink with 120mm Fan)
• Mounting Brackets for Intel Sockets (LGA 1150, 1151, 1155, 1156, 775)
• Mounting Brackets for AMD Sockets (AM2, AM3, AM3+, AM4, FM1, FM2)
• Thermal Paste/Compound
• Montážní šrouby a příslušenství

4. Nastavení a instalace

This section provides general guidelines for installing your Aerocool VERKHO3PLUS CPU cooler. Specific steps may vary slightly depending on your motherboard and CPU socket type. Refer to your motherboard manual for detailed instructions on CPU and cooler installation.

Kompatibilní zásuvky:

The VERKHO3PLUS supports a wide range of Intel and AMD sockets, including:

• Intel: LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 775
• AMD: Socket AM2, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket FM2

Kroky instalace:

1. Připravte základní desku: Ensure your motherboard is removed from the PC case or has sufficient access for cooler installation. If replacing an old cooler, carefully remove it and clean any old thermal paste from the CPU and motherboard.
2. Install Backplate (if applicable): For some sockets, a backplate needs to be installed on the rear side of the motherboard. Align the backplate with the mounting holes around the CPU socket.
3. Připevněte montážní konzoly: Secure the appropriate mounting brackets for your CPU socket type to the cooler's base. Ensure they are firmly attached.
4. Naneste termální pastu: Apply a small, pea-sized amount of thermal paste to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
5. Mount the Cooler: Carefully align the cooler with the mounting holes on the motherboard or backplate. Gently lower the cooler onto the CPU, ensuring the base makes full contact.
6. Zajistěte chladič: Use the provided screws to secure the cooler to the motherboard. Tighten screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) to ensure even pressure. Do not overtighten.
7. Připojení kabelu ventilátoru: Locate the CPU_FAN header on your motherboard. Connect the 4-pin PWM fan cable from the VERKHO3PLUS cooler to this header. This allows the motherboard to control fan speed based on CPU temperature.
8. Závěrečné kontroly: Double-check all connections and ensure the cooler is securely mounted and does not obstruct any other components or RAM slots.

5. Návod k obsluze

Once installed, the Aerocool VERKHO3PLUS CPU cooler operates automatically, controlled by your motherboard's BIOS/UEFI settings. The 4-pin PWM connection allows for dynamic fan speed adjustment, ensuring efficient cooling while minimizing noise.

Optimalizace výkonu:

• Nastavení BIOSu/UEFI: Access your motherboard's BIOS/UEFI settings during startup (usually by pressing DEL or F2). Navigate to the fan control section (often under "Hardware Monitor," "PC Health Status," or "Fan Control").
• Křivka ventilátoru: Adjust the fan curve to balance cooling performance and noise levels. You can set the fan to run quietly at low temperatures and ramp up speed as the CPU temperature increases.
• Průtok vzduchu systémem: Ensure your PC case has good overall airflow with intake and exhaust fans to help remove hot air from the system, which contributes to better CPU cooling.
• Sledování: Use monitoring software (e.g., HWMonitor, Core Temp) to keep an eye on your CPU temperatures during various workloads to ensure the cooler is performing as expected.

6. Údržba

Regular maintenance helps ensure the longevity and optimal performance of your Aerocool VERKHO3PLUS CPU cooler.

• Čištění prachu: Periodically (every 3-6 months, or more frequently in dusty environments) clean dust from the heatsink fins and fan blades. Use compressed air or a soft brush. Ensure the fan is held stationary while cleaning with compressed air to prevent over-spinning and potential damage.
• Teplovodní pasta: Thermal paste typically lasts for several years. However, if you notice a significant increase in CPU temperatures, or if you remove the cooler for any reason, it is recommended to clean off the old thermal paste and apply a fresh layer.
• Kontrola ventilátoru: Check the fan for any signs of wear, unusual noises, or wobbling. If the fan becomes excessively noisy or stops spinning, it may need replacement.

7. Řešení problémů

If you encounter issues with your Aerocool VERKHO3PLUS CPU cooler, refer to the following common troubleshooting steps:

8. Specifikace

9. Záruka a podpora

Specific warranty details for the Aerocool VERKHO3PLUS CPU cooler are not provided in the available product information. Please refer to the retailer or Aerocool's official webstránky, kde najdete nejaktuálnější záruční podmínky.

For technical support, troubleshooting assistance beyond this manual, or inquiries regarding replacement parts, please visit the official Aerocool support webnebo kontaktujte jejich oddělení zákaznických služeb. Kontaktní informace obvykle naleznete na webových stránkách výrobce webmísto nebo obal produktu.

You can find more information on Aerocool's official webmísto: www.aerocool.io