1. Nastavení
This section guides you through the initial preparation of your Brother LS-1217 sewing machine before its first use.
1.1 Vybalení a umístění
Carefully remove the sewing machine from its packaging. Retain all packing materials for future transport or storage. Place the machine on a stable, flat surface with adequate lighting. Ensure there is enough space around the machine for comfortable operation and fabric handling.
1.2 Připojení napájení
Connect the power cord to the machine's power input jack, then plug the other end into a standard electrical outlet. Ensure the power switch is in the "OFF" position before connecting. The foot controller also connects to a dedicated jack on the machine.
1.3 Instalace jehly
- Otočte ruční kolo směrem k sobě, abyste jehlu zvedli do nejvyšší polohy.
- Povolte jehlu třamp šroub otáčením proti směru hodinových ručiček.
- Vložte novou jehlu plochou stranou k zadní straně stroje a zatlačte ji nahoru až nadoraz.
- Utáhněte jehlu třamp pevně zašroubujte.
1.4 Navíjení cívky
Proper bobbin winding is crucial for even stitching.
- Umístěte špulku nitě na špulku.
- Veďte nit horním vodítkem nitě a kolem napínacího kotouče navíjení cívky.
- Insert the thread end into the small hole on the bobbin, from the inside out.
- Nasaďte cívku na vřeteno navíječe cívky a zatlačte vřeteno doprava.
- Press the foot controller gently to start winding. Stop when the bobbin is full and evenly wound.
- Cut the thread, push the spindle back to the left, and remove the bobbin.
1.5 Navlékání nitě do stroje
Follow these steps for correct upper and lower threading.
Horní závit:
- Zvedněte přítlačnou patku a jehlu do nejvyšší polohy.
- Nasaďte cívku nitě na kolík cívky.
- Provlékněte nit horním vodítkem nitě.
- Pass the thread down into the tension discs, then up and through the take-up lever from right to left.
- Guide the thread down through the remaining thread guides and finally through the eye of the needle from front to back.
- Pull about 6 inches of thread under the presser foot and towards the back.
Navlékání spodní nitě (vkládání cívky):
- Otevřete kryt cívky.
- Vložte navinutou cívku do pouzdra cívky a ujistěte se, že se nit odvíjí proti směru hodinových ručiček.
- Guide the thread into the tension spring of the bobbin case.
- Zavřete kryt cívky.
- Hold the upper thread lightly, turn the handwheel towards you to lower and raise the needle, catching the bobbin thread. Pull both threads under the presser foot and to the back.
2. Obsluha stroje
This section details the basic operations for sewing with your Brother LS-1217.
2.1 Základní výběr stehu
Your machine offers various stitch patterns. To select a stitch, turn the pattern selection dial until the desired stitch symbol aligns with the indicator mark. Refer to the stitch chart on your machine for available options.
2.2 Fabric Placement
Place the fabric under the presser foot, aligning the edge with the desired seam allowance guide on the needle plate. Lower the presser foot using the presser foot lever.
2.3 Začínáme šít
With the presser foot lowered, gently press the foot controller. The machine will begin to sew. Guide the fabric gently; do not pull or push it, as this can bend the needle or affect stitch quality.
2.4 Šití v opačném směru
To secure the beginning and end of a seam, use the reverse stitch lever. Press and hold the lever while sewing to stitch backward. Release the lever to resume forward stitching.
2.5 Finishing a Seam
When you reach the end of your seam, perform a reverse stitch for a few stitches, then release the foot controller. Raise the needle to its highest position and lift the presser foot. Pull the fabric towards the back, then cut the threads using the thread cutter on the machine or scissors, leaving about 4-6 inches of thread tails.
3. Údržba
Regular maintenance ensures the longevity and optimal performance of your Brother LS-1217.
3.1 Čištění stroje
Lint and dust can accumulate in the bobbin area and feed dogs, affecting stitch quality. Disconnect the machine from power before cleaning.
- Vyjměte jehlu, přítlačnou patku a stehovou desku.
- Use the small brush provided with your machine (or a soft brush) to remove lint from the bobbin case, feed dogs, and surrounding areas.
- Do not use compressed air, as it can push lint further into the machine.
- Otřete vnější povrch stroje měkkým, suchým hadříkem.
3.2 Mazání
The Brother LS-1217 is designed to be largely maintenance-free regarding lubrication. Avoid applying oil unless specifically instructed by a qualified service technician, as improper lubrication can cause damage.
3.3 Výměna jehly
Replace the needle regularly (approximately every 8-10 hours of sewing or after every major project) and immediately if it becomes bent, dull, or burred. A damaged needle can cause skipped stitches, thread breakage, and fabric damage. Refer to section 1.3 for installation instructions.
4. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat, a nabízí řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vynechané stehy | Incorrect needle installation, bent needle, wrong needle type for fabric, improper threading. | Reinstall needle correctly (flat side to back), replace bent needle, use appropriate needle for fabric, rethread machine completely. |
| Přetržení nitě | Improper threading, incorrect tension, damaged needle, poor quality thread, bobbin wound unevenly. | Rethread machine, adjust tension, replace needle, use good quality thread, rewind bobbin evenly. |
| Fabric Jamming / Bunching | Improper threading, presser foot not lowered, excessive pulling/pushing of fabric, lint buildup. | Rethread machine, ensure presser foot is down, guide fabric gently, clean bobbin area and feed dogs. |
| Nerovnoměrné stehy | Incorrect tension settings, improper threading, dull needle, inconsistent fabric feeding. | Adjust upper and lower thread tension, rethread machine, replace needle, ensure consistent fabric guidance. |
| Stroj se nespouští | Power cord not connected, power switch off, foot controller not connected, bobbin winder spindle engaged. | Check power connections, turn power switch on, connect foot controller, disengage bobbin winder spindle. |
Pokud tato řešení problém nevyřeší, kontaktujte zákaznickou podporu nebo kvalifikovaného servisního technika.
5. Specifikace
Key technical specifications for the Brother LS-1217 Sewing Machine.
- Model: Brother LS-1217
- Typy stehů: Multiple utility and decorative stitches (e.g., Straight, Zigzag, Buttonhole)
- Jehlový systém: HAx1 (130/705H)
- Napájení: AC 110-120V, 60Hz (North America) / AC 220-240V, 50Hz (Europe/Asia) - (Note: Actual voltag(záleží na regionu)
- Rozměry (přibližně): 15.4" x 6.7" x 11.4" (39 cm x 17 cm x 29 cm)
- Hmotnost (přibližně): 11 lb (5 kg)
- Maximální rychlost šití: Až 1 100 stehů za minutu
- Osvětlení: Built-in sewing light
6. Záruka a podpora
For detailed warranty information, please refer to the warranty card included with your original purchase or visit the official Brother support webUschovejte si doklad o koupi pro případ reklamace.
Zákaznická podpora: For technical assistance, parts, or service, please contact Brother customer support. Contact details can typically be found on the Brother official webwebu nebo v dokumentaci k produktu.
Online zdroje: Additional resources, FAQs, and video tutorials may be available on the official Brother support webmísto.