Massive Audio HIPPOXL152R
Massive Audio HIPPOXL152R 15" Subwoofer User Manual
Model: HIPPOXL152R
1. Úvod
Thank you for choosing the Massive Audio HIPPOXL152R 15-inch Car Audio Subwoofer. This high-performance subwoofer is engineered for exceptional bass reproduction in car audio systems, suitable for daily listening, high-powered setups, and SPL competitions. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your subwoofer.
2. Bezpečnostní informace
Please read and understand all safety instructions before installing or operating this product. Failure to follow these guidelines may result in injury or damage to the product or vehicle.
- Před zahájením jakýchkoli elektrických prací vždy odpojte baterii vozidla.
- Ensure proper wiring and connections to prevent short circuits and electrical fires.
- Use appropriate gauge wiring for power and speaker connections as recommended by amplifier manufacturers.
- Install the subwoofer securely in a suitable enclosure to prevent movement during vehicle operation.
- Nevystavujte subwoofer nadměrné vlhkosti nebo extrémním teplotám.
- Dlouhodobé vystavení vysokým hladinám akustického tlaku může způsobit trvalé poškození sluchu. Při nastavování hlasitosti buďte opatrní.
3. Co je v krabici
Po otevření balení zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené.
- Massive Audio HIPPOXL152R 15 Inch Car Audio Subwoofer (1 unit)
4. Vlastnosti
The HIPPOXL152R subwoofer incorporates advanced design and materials for superior performance:
- 430 oz High Energy Double Stack Strontium Magnet Structure
- Heavy Duty Direct Input Wires Connection to Voice Coils
- Red Stitched Edge to the Cone's Edge for Added Strength
- Reinforced Fiberglass Woven Dust cap for High Power Applications
- Dual 2 Ohm Voice Coils for flexible wiring configurations
- Kevlar Fiber Reinforced Non-Pressed Paper Cone with Industrial Textured Finish
- Heavy Duty Rugged Industrial Textured Cast Aluminum Basket
5. Specifikace
| Atribut | Detail |
|---|---|
| Název modelu | HIPPOXL152R |
| Typ reproduktoru | Subwoofer |
| Průměr subwooferu | 15 palce |
| Impedance | Duální 2 ohmy |
| Maximální výstupní výkon reproduktoru | 6000 XNUMX wattů (špička) |
| Výkon RMS | 3000 wattů |
| Hlasová cívka | 4 palců |
| Materiál | Basket: Cast Aluminum, Cone: Non-Pressed Paper |
| Rozměry produktu | 19"H x 19"Š x 17"V |
| Hmotnost položky | 68 libry |
| Doporučená použití | Daily music enjoyment, SPL competitions, high-powered musical setups |
| Výrobce | Massive Audio |
6. Nastavení a instalace
Proper installation is crucial for the performance and longevity of your subwoofer. It is highly recommended that installation be performed by a qualified car audio professional.
6.1 Požadavky na kryt
The HIPPOXL152R requires a robust, sealed or ported enclosure designed to its specific Thiele-Small parameters for optimal performance.Smallest Recommended Sealed Enclosure: Approximately 16" L x 16" W x 15" H. Consult a car audio specialist or use a reputable enclosure design software for precise dimensions and port tuning if building a ported enclosure.
6.2 Wiring Configurations (Dual 2 Ohm)
Dvojité 2ohmové kmitací cívky nabízejí flexibilitu v zapojení, aby odpovídaly vašim potřebám. ampstabilní impedance zkušebního zařízení.
- Zatížení 1 ohm: Wire both voice coils in parallel. Connect the positive (+) terminals of both coils together and to the amplifier's positive output. Connect the negative (-) terminals of both coils together and to the ampnegativní výstup zařízení na ochranu proti přetížení.
- Zatížení 4 ohm: Wire both voice coils in series. Connect the positive (+) terminal of one coil to the negative (-) terminal of the other coil. Connect the remaining positive (+) terminal to the amplifier's positive output and the remaining negative (-) terminal to the ampnegativní výstup zařízení na ochranu proti přetížení.
Důležité: Ujistěte se, že vaše ampsubwoofer je stabilní při zvolené impedanci. Nesprávné zapojení může poškodit subwoofer i reproduktor. ampživější.
6.3 AmpVýběr zvlhčovače
Vyberte an amplifier capable of delivering 3000 Watts RMS power at the chosen impedance (1 Ohm or 4 Ohm). Providing adequate, clean power is essential for optimal performance and to prevent damage from clipping.
6.4 Montáž
Mount the subwoofer securely within the enclosure using appropriate fasteners. Ensure a tight seal between the subwoofer frame and the enclosure baffle to prevent air leaks.
7. Návod k obsluze
7.1 Období záběhu
Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components (spider and surround) to loosen up and reach their optimal compliance, improving overall performance and longevity. During break-in, avoid prolonged periods of high excursion or clipping.
7.2 AmpNastavení zesílení a dělicí mechaniky Lifier
Správně si nastavte amplifier's gain (input sensitivity) to match the output voltage of your head unit. Use a digital multimeter or oscilloscope for accurate gain setting to prevent clipping. Set the low-pass filter (LPF) on your amplifier or head unit to filter out frequencies above the subwoofer's intended range, typically between 60Hz and 100Hz, depending on your system and preferences.
7.3 Úrovně poslechu
While the HIPPOXL152R is designed for high power, continuous operation at extreme volumes that cause audible distortion or excessive cone excursion can lead to damage. Listen for signs of distortion and reduce volume if present.
8. Údržba
The Massive Audio HIPPOXL152R is built for durability and requires minimal maintenance.
- Udržujte membránu a obvod subwooferu bez prachu a nečistot. K čištění používejte měkký, suchý hadřík.
- Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a bez koroze.
- Ensure the subwoofer enclosure remains sealed and free from damage.
- Avoid spilling liquids on the subwoofer.
9. Řešení problémů
Pokud máte problémy se subwooferem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk ze subwooferu |
|
|
| Zkreslený zvuk |
|
|
| Slabý basový výstup |
|
|
If problems persist after troubleshooting, contact Massive Audio customer support or a certified car audio technician.
10. Záruka a podpora
10.1 Omezená záruka
Massive Audio products are covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please retain your proof of purchase for warranty claims. Damage caused by improper installation, abuse, accident, or unauthorized repair is not covered under warranty.
10.2 Zákaznická podpora
For technical assistance, warranty inquiries, or service, please visit the official Massive Audio webwebu nebo kontaktujte jejich oddělení zákaznické podpory.
www.massiveaudio.com
Obrázky produktů

Obrázek 1: Úhlové view of the HIPPOXL152R subwoofer, highlighting its robust magnet and voice coil assembly.

Obrázek 2: Shora dolů view of the HIPPOXL152R subwoofer, showcasing the reinforced paper cone and red stitched surround.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.