JET JMD-18 350018 Milling/Drilling Machine

Zavedení

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

Obrázek 1: The JET JMD-18 350018 Milling/Drilling Machine, shown with its integrated floor stand. This versatile machine is designed for precision milling and drilling operations.

Bezpečnostní informace

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating this machine.

• Před použitím stroje si přečtěte a pochopte všechny pokyny.
• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable clothing. Avoid loose clothing or jewelry.
• Zajistěte, aby byl pracovní prostor čistý, dobře osvětlený a bez nepořádku.
• Nepoužívejte stroj vamp nebo vlhkých místech.
• Udržujte děti a přihlížející mimo provozní oblast.
• Securely fasten all workpieces before beginning any operation.
• Před prováděním jakékoli údržby, seřizování nebo výměny příslušenství odpojte napájení.
• Používejte pouze doporučené příslušenství a nástavce.
• Maintain the machine in good working condition. Inspect for damaged parts before each use.
• Nikdy nenechávejte stroj bez dozoru, když je v chodu.

Nastavení

Proper setup is crucial for the safe and effective operation of your milling/drilling machine.

1. Vybalení a kontrola: Carefully unpack all components. Inspect for any shipping damage. Report any damage immediately to your dealer.
2. Sestava stojanu: Assemble the CS-18 Floor Stand according to the separate stand assembly instructions provided. Ensure all fasteners are securely tightened. The stand includes an enclosed shelf for convenient storage.
3. Machine Mounting: Securely mount the JMD-18 milling/drilling machine head to the assembled floor stand. Ensure all mounting bolts are tightened to the specified torque.
4. Elektrické připojení: Connect the machine to a 230-Volt, 1-Phase power supply. Ensure the electrical circuit is properly grounded and protected by a suitable circuit breaker.
5. Worktable Preparation: Clean the 9-1/2-by-31-3/4-inch worktable surface. Apply a light coat of machine oil to prevent rust.
6. Belt Cover Adjustment: The hinged belt cover allows for faster speed changing. Familiarize yourself with its operation for future speed adjustments.
7. Vyrovnání: Ensure the machine is level on a stable surface to prevent vibration and ensure accurate operation.

Návod k obsluze

This section outlines the general procedures for operating your JET JMD-18 milling/drilling machine.

• Zapnutí/vypnutí: Locate the main power switch. Turn the machine ON only when ready to begin work and OFF immediately after completing a task or before making adjustments.
• Výběr rychlosti: Adjust the spindle speed using the belt and pulley system accessible via the hinged belt cover. Select the appropriate speed for the material and tooling being used. Refer to a speed chart for guidance.
• Obrobek Clamping: Vždy bezpečně třamp your workpiece to the worktable using appropriate vises or clamps. Loose workpieces can cause injury or damage.
• Instalace nástroje: Install the correct cutting tool (drill bit, end mill, etc.) into the spindle chuck or collet. Ensure it is properly seated and tightened.
• Milling Operations: For milling, carefully position the workpiece relative to the cutting tool. Use the table's X, Y, and Z axis controls for precise material removal.
• Vrtací operace: For drilling, align the drill bit with the desired hole location. Use the quill feed handle for controlled drilling depth.
• Aplikace chladicí kapaliny: For certain materials and operations, apply appropriate cutting fluid to prolong tool life and improve surface finish.
• Nouzové zastavení: Seznamte se s umístěním a obsluhou tlačítka nouzového zastavení.

Údržba

Regular maintenance ensures the longevity and optimal performance of your JET milling/drilling machine.

• Denní úklid: After each use, clean the machine thoroughly, removing all chips, dust, and debris from the worktable, ways, and other surfaces.
• Mazání: Periodically lubricate all moving parts, including lead screws, gibs, and spindle bearings, according to the lubrication points indicated in the machine's diagrams (if available). Use recommended lubricants.
• Kontrola pásu: Regularly inspect the drive belts for wear, cracks, or tension. Replace worn belts and adjust tension as needed.
• Elektrorevize: Periodically check electrical cords and connections for damage. Ensure all wiring is secure.
• Tooling Care: Keep all cutting tools sharp and clean. Dull tools can lead to poor performance and machine strain.
• Skladování: When not in use, store the machine in a dry, clean environment. Apply a thin coat of rust preventative to exposed metal surfaces.

Odstraňování problémů

Tato část obsahuje řešení běžných problémů, se kterými se můžete setkat.

Specifikace

Záruka a podpora

For information regarding product warranty, technical support, or to purchase replacement parts, please contact JET customer service or visit the official JET webmísto.

You can also find more information and products from JET by visiting their official store page: JET Official Store