Luceco EBH22S40-02
Luceco EBH22S40-02 Bulkhead Light User Manual
Model: EBH22S40-02
Zavedení
Thank you for choosing the Luceco EBH22S40-02 Bulkhead Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before installation and retain it for future reference.
Obrázek 1: The Luceco EBH22S40-02 Bulkhead Light, shown with the chrome bezel option. This versatile light fixture is designed for various indoor and outdoor applications, offering bright and efficient illumination.
Bezpečnostní informace
- Před instalací nebo údržbou vždy odpojte napájení.
- Instalaci by měl provést kvalifikovaný elektrikář v souladu s místními předpisy pro elektroinstalaci.
- Svítidlo žádným způsobem neupravujte.
- Ensure the mounting surface is suitable to support the weight of the fixture.
- This product is rated IP54, suitable for damp and outdoor environments, but requires protection from direct jets of water.
Nastavení a instalace
Follow these steps for proper installation of your Luceco bulkhead light:
- Připravte instalační prostor: Ensure the power supply to the circuit is switched off at the main breaker.
- Remove Diffuser and Bezel: Gently twist or unclip the diffuser cover and remove the decorative bezel (either chrome or white, depending on your preference).
- Namontujte základnu: Position the light base on the desired mounting surface. Mark the drilling points. Drill appropriate holes and secure the base using suitable screws and wall plugs (not supplied).
- Zapojte přípravek: Connect the electrical cable to the supplied connector block. Ensure correct polarity (Live, Neutral, Earth). The fixture operates on 240 Volts.
- Attach Diffuser and Bezel: Once wired and secured, reattach the diffuser cover and the chosen decorative bezel. Ensure they are securely fastened to maintain the IP54 rating.
- Obnovit napájení: Switch on the power supply at the main breaker. Test the light fixture.
Obrázek 2: Bývalýample of the Luceco bulkhead light installed on a ceiling in a bathroom environment. Its IP54 rating makes it suitable for such damp umístění.
Obrázek 3: The Luceco EBH22S40-02 light with the chrome bezel, offering a sleek and modern aesthetic. The product includes both chrome and white bezel options for customization.
Obrázek 4: The Luceco EBH22S40-02 light with the white bezel, providing a more subtle and integrated look, especially on white ceilings or walls.
Návod k obsluze
The Luceco EBH22S40-02 Bulkhead Light is designed for simple operation. Once installed and connected to a power supply, it functions as a standard light fixture.
- Zapnutí/vypnutí: Operate the light using a standard wall switch connected to the circuit.
- Světelný výkon: The fixture provides 1250 lumens of light at a color temperature of 4000K (Cool White), suitable for general illumination.
- Energetická účinnost: This LED fixture consumes 14 Watts of power, offering an energy-efficient lighting solution.
Údržba
The Luceco EBH22S40-02 Bulkhead Light requires minimal maintenance.
- Čištění: To clean the fixture, ensure the power is off. Wipe the surface with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Lamp Nahrazení: This fixture uses integrated LED technology and does not require lamp nahrazení.
- Inspekce: Pravidelně kontrolujte svítidlo, zda nevykazuje známky poškození nebo uvolněných spojů. Pokud zjistíte jakékoli problémy, odpojte napájení a obraťte se na kvalifikovaného elektrikáře.
Odstraňování problémů
If you encounter issues with your Luceco bulkhead light, refer to the table below for common problems and solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Žádné napájení; uvolněné zapojení; vadný spínač. | Check circuit breaker. Ensure all wiring connections are secure. Test or replace the switch. |
| Světlo bliká. | Loose wiring; Incompatible dimmer switch (if applicable, though this model is not specified as dimmable). | Check wiring connections. Ensure the light is not connected to an incompatible dimmer. |
| Snížený světelný výkon. | Dirt or dust on diffuser. | Clean the diffuser cover as per maintenance instructions. |
If the problem persists after attempting these solutions, please contact a qualified electrician or Luceco customer support.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Luceco |
| Číslo modelu | EBH22S40-02 |
| Rozměry (D x Š x V) | 22.5 x 22.7 x 7 cm |
| Hmotnost | 520 gramů |
| Spotřeba energie | 14 wattů |
| svtage | 240 voltů |
| Počet světelných zdrojů | 1 (integrovaná LED) |
| Hodnocení ochrany proti vniknutí (IP). | IP54 |
| Index podání barev (CRI) | 80 |
| Lumen Output (from title) | 1250 LM |
| Color Temperature (from title) | 4000K (studená bílá) |
Záruka a podpora
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Luceco webUschovejte si doklad o koupi pro případné reklamace.
For further assistance, you may contact Luceco customer service through their official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.