Yeacomm FNB-80Li / FNB-58Li Series Li-ion Two-Way Radio Battery Instruction Manual

1. Konec produktuview

This manual provides instructions for the Yeacomm FNB-80Li / FNB-58Li series rechargeable Li-ion battery packs. These batteries are designed for use with various Yaesu, Vertex Standard, and Standard Horizon two-way radio models.

Klíčové vlastnosti:

• Typ baterie: Li-ion
• Jmenovitý svtage: 7.4V
• Nominální kapacita: 1500 XNUMX mAh
• Kompatibilita: Designed for Yaesu/Vertex/Standard Horizon Radios including VX-5, VX-5R, VX-5RS, VX-6, VX-6R, VX-6E, VX-7R, VX-7RB, VXA-700, VXA-710, HX460, HX460S, HX460SB, HX460SS, HX470, HX470S, HX471, HX471S, HX471SB, HX471SS.
• Konstrukce: Environmental-friendly, ultrasonic sealing technology, impact-resistant design, dual protection PCM for short circuit protection.

Obrázek 1.1: Přední view of the Yeacomm FNB-80Li Li-ion battery pack, showing the model number, voltage, capacity, and safety warnings printed on the label.

2. Nastavení a instalace

2.1 Počáteční nabíjení

Before first use, fully charge the battery. Use a compatible charger, such as the CD-15A, or the charger supplied with your radio.

1. Ensure the battery is securely attached to the radio (if charging while attached) or placed correctly in the charging cradle.
2. Připojte nabíječku ke zdroji napájení.
3. Observe the charger's indicator light for charging status. Refer to your radio or charger manual for specific indicator meanings.
4. Allow the battery to charge completely before initial use. This may take several hours.

2.2 Instalace/vyjmutí baterie

To install or remove the battery from your compatible two-way radio:

1. Turn off the radio before attempting to install or remove the battery.
2. Zarovnejte baterii s přihrádkou na baterii na zadní straně rádia.
3. Slide the battery into place, ensuring the contacts align properly. Apply firm, even pressure until the battery clicks into position and the latch (if present on your radio model) secures it.
4. To remove, disengage the battery latch (if applicable) and slide the battery out.

Obrázek 2.1: Dno view of the battery, showing the metallic charging contacts that connect to the radio or charging cradle.

Obrázek 2.2: Zadní view of the battery, illustrating the screw points for secure attachment to certain radio models or accessories.

3. Návod k obsluze

Once the battery is installed and fully charged, your radio is ready for operation.

• Zapnutí: Turn on your radio using its power button.
• Úroveň baterie: Monitor the battery level indicator on your radio's display.
• Dobíjení: Recharge the battery when the radio indicates a low battery level to ensure uninterrupted operation. Frequent partial discharges and recharges are generally acceptable for Li-ion batteries.
• Optimální výkon: Pro optimální životnost a výkon baterie se vyvarujte jejího úplného vybití před nabíjením.

4. Údržba a bezpečnost

4.1 Obecná údržba

• Čištění: Clean the battery contacts periodically with a dry, soft cloth to ensure good electrical connection.
• Skladování: If storing the battery for an extended period, store it in a cool, dry place at approximately 50% charge. Avoid extreme temperatures.
• Likvidace: Do not dispose of the battery in fire. Follow local regulations for proper disposal of Li-ion batteries.

4.2 Bezpečnostní upozornění

Dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození:

• Nebezpečí požáru: Do not dispose of in fire. Keep the battery away from fire or high heat sources.
• Demontáž: Nikdy se nepokoušejte baterii rozebírat.
• Zkrat: Do not directly connect (short circuit) the positive (+) and negative (-) terminals with metal objects.
• Nabíjení: Only use specified Lithium-Ion battery chargers. Using an incompatible charger may cause damage or fire.
• Dopad: Zabraňte pádu baterie nebo jejímu vystavení silným nárazům.
• Vystavení vodě: While the battery features ultrasonic sealing, avoid prolonged exposure to water or moisture.

Obrázek 4.1: Úhlové view of the battery, clearly showing the safety warnings and specifications printed on the label, including instructions against disposal in fire, disassembly, and short-circuiting.

5. Řešení problémů

Pokud máte problémy s baterií, zvažte následující:

• Battery Not Fitting Properly:

  Ensure the battery is correctly aligned with the radio's compartment. Some compatible batteries may have a slightly tighter fit than original equipment manufacturer (OEM) parts. Apply firm, even pressure. Do not force the battery if it does not align, as this may damage the contacts or casing.

• Charging Error Message:

  If your radio or charger displays a "charging error," first verify that the battery is seated correctly and the contacts are clean. Ensure you are using a compatible charger. If the error persists, the battery or charger may be faulty. Try charging a known good battery (if available) to isolate the issue.
• Shortened Operating Time:

  Over time, all rechargeable batteries experience a decrease in capacity. If the battery's operating time has significantly reduced, it may be nearing the end of its lifespan and require replacement. Ensure the battery is fully charged before each use.

• Baterie se nenabíjí:

  Check the charger connection and power source. Ensure the battery contacts are clean and free of debris. If the issue persists, test with another compatible battery or charger if possible.

Pokud kroky pro řešení potíží problém nevyřeší, obraťte se na zákaznickou podporu s žádostí o další pomoc.

6. Specifikace

7. Záruka a podpora

7.1 Informace o záruce

Specific warranty details for this product are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact the seller or manufacturer directly.

7.2 Zákaznická podpora

For technical assistance, troubleshooting not covered in this manual, or any other product-related inquiries, please contact Yeacomm customer support or the retailer from whom the product was purchased.

Výrobce: Ano