Einhell Power X-Change 18V Cordless Long Reach Hedge Trimmer GE-HH 18/45 Li T Solo User Manual

1. Konec produktuview

The Einhell Power X-Change GE-HH 18/45 Li T is a powerful 18V cordless long reach hedge trimmer designed for maintaining hedges, shrubs, and bushes, especially at height. This tool offers cordless freedom and is part of the Einhell Power X-Change battery system (battery and charger sold separately).

Mezi klíčové vlastnosti patří:

• Bezdrátová svoboda: Operates on an 18V Power X-Change battery for unrestricted movement.
• Teleskopická rukojeť: Infinitely adjustable aluminum handle extends up to 2.5 meters (8 feet 2 inches) for reaching high areas.
• Přesné čepele: Laser-cut and diamond-ground steel blades provide clean, sharp cuts with a cutting length of 400mm (16 inches) and 16mm teeth spacing.
• Nastavitelná řezná hlava: A 7-position tiltable cutting head allows for versatile trimming angles.
• Vyvážený design: Handle-mounted motor ensures optimal balance, reducing fatigue during extended use.
• Odolná konstrukce: Features a robust metal gearbox for long-lasting performance.

2. Bezpečnostní pokyny

Při práci s elektrickým nářadím vždy upřednostňujte bezpečnost. Před použitím si přečtěte a pochopte všechna bezpečnostní varování a pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

• Osobní ochranné prostředky (OOP): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy gloves, and non-slip footwear. A safety helmet with a face shield is recommended, especially when working overhead.
• Pracovní oblast: Keep the work area clean and well-lit. Do not operate the trimmer in wet or damp conditions. Keep bystanders, children, and pets at a safe distance (at least 15 meters / 50 feet).
• Kontrola nástrojů: Before each use, inspect the trimmer for any damage, loose parts, or worn blades. Do not use a damaged tool.
• Bezpečnost baterie: Use only Einhell Power X-Change 18V batteries and chargers. Do not expose batteries to heat, direct sunlight, or water.
• Správný úchop: Always hold the trimmer firmly with both hands.
• Vyhněte se překážkám: Be aware of hidden wires, fences, or other objects that could be struck by the blades.
• Údržba: Disconnect the battery before performing any maintenance, cleaning, or when clearing jammed material.
• Skladování: Store the trimmer in a dry, secure place out of reach of children.

3. Zahrnuté komponenty

The following components are typically included with your Einhell GE-HH 18/45 Li T hedge trimmer:

• Hlava nůžek na živý plot
• Výsuvná tyč
• Chránič čepele
• Návod k použití

Note: Battery and charger are not included and must be purchased separately as part of the Power X-Change system.

4. Nastavení

Follow these steps to prepare your hedge trimmer for use:

1. Sestavte tyč: Connect the hedge trimmer head to the extendable pole. Ensure all connections are secure and locked into place according to the diagrams in the full manual.
2. Nastavení délky tyče: Loosen the locking mechanism on the telescopic aluminum handle. Extend the pole to the desired length for your task, then securely tighten the locking mechanism. The pole can be adjusted from 1.6m to 2.5m.
3. Vložte baterii: Ensure the battery is fully charged. Align the battery with the battery slot on the trimmer's handle and slide it in until it clicks securely into place.
4. Připevnění ramenního popruhu: For comfortable and balanced operation, especially when extended, attach the provided shoulder strap to the designated points on the trimmer. Adjust the strap for a snug fit.
5. Remove Blade Guard: Carefully remove the blade guard from the cutting blades before starting the trimmer. Always replace the blade guard when the tool is not in use or during transport.

5. Návod k obsluze

Before operating, ensure you have read the safety instructions and the trimmer is properly set up.

1. Spuštění zastřihovače: With the battery inserted, press the safety lock-off button (if present) and then squeeze the trigger switch to start the motor. Release the trigger to stop.
2. Adjusting Cutting Head Angle: The cutting head can be tilted to 7 different positions. To adjust, press the release button/lever on the head, set it to the desired angle, and ensure it locks securely in place. This allows for ergonomic cutting of hedge tops and sides.
3. Technika ořezávání:
   • For vertical surfaces, use a sweeping motion from bottom to top.
   • For horizontal surfaces, hold the trimmer slightly angled (about 10-15 degrees) to ensure a clean cut and allow clippings to fall away.
   • Avoid forcing the blades through thick branches. If the blades jam, immediately release the trigger and remove the battery before clearing the obstruction.
4. Práce ve výškách: When using the extended pole, maintain a stable stance. Use the shoulder strap to distribute weight and reduce strain. Be mindful of overhead power lines and other obstacles.
5. Zastavení vyžínače: Release the trigger switch. The blades will stop quickly. Always remove the battery when finished or before making adjustments.

6. Údržba

Regular maintenance ensures optimal performance and extends the life of your hedge trimmer.

• Čištění čepele: After each use, remove the battery and carefully clean the blades with a stiff brush to remove sap and debris.
• Mazání čepele: Apply a light machine oil or blade lubricant to the cutting blades after cleaning to prevent rust and ensure smooth operation.
• Ostření čepele: Dull blades can tear foliage and strain the motor. Have the blades professionally sharpened or replace them if they become excessively dull or damaged.
• Generální úklid: Wipe down the housing of the trimmer with a damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Skladování: Store the trimmer in a dry, secure location, away from moisture and extreme temperatures. Always reattach the blade guard before storage. Remove the battery if storing for extended periods.

7. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat při používání nůžek na živý plot.

8. Specifikace

Technical data for the Einhell GE-HH 18/45 Li T hedge trimmer:

• Číslo modelu: 3410866
• Zdroj napájení: 18V Battery Powered (Power X-Change system)
• Délka čepele: 450 mm (17.7 palce)
• Délka řezu: 400 mm (16 palce)
• Teeth Spacing: 16 mm
• Rozměry produktu (D x Š x V): 82.28" x 5.12" x 6.69" (209 cm x 13 cm x 17 cm)
• Hmotnost položky: 4.28 kilogramů (9.44 liber)
• Materiál čepele: Legovaná ocel
• Materiál rukojeti: Hliník
• Výrobce: Einhell

9. Záruka a podpora

For warranty information, technical support, or to order spare parts, please refer to the official Einhell webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Doba dostupnosti náhradních dílů v EU: 2 roky

Pro další pomoc prosím navštivte Oficiální Einhell webmísto.