CHACON 5411478546627

CHACON Sada 4 dálkových spínačů s dálkovým ovládáním Uživatelská příručka

Model: 5411478546627

Zavedení

This manual provides essential instructions for the safe and efficient use of your CHACON Set of 4 Remote Switches with Remote Control. Please read this manual thoroughly before installation and operation, and retain it for future reference. This product allows you to remotely control electrical lights and appliances plugged into the receiver outlets.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

  • 4 x Remote-controlled electrical outlets (Type C, EU 2-pin)
  • 1 x Dálkové ovládání
  • 1 x CR2032 battery (pre-installed in remote control)
CHACON Set of 4 Remote Switches and Remote Control

Image: The complete CHACON set, showing four white remote-controlled outlets and one white remote control with grey buttons.

Nastavení a instalace

The CHACON remote switches are designed for easy, wireless installation.

  1. Insert Battery into Remote Control: The CR2032 battery is typically pre-installed. If not, open the battery compartment on the back of the remote control and insert the CR2032 battery with the positive (+) side facing up.
  2. Plug in the Receiver Outlet: Plug one of the remote-controlled outlets into a standard Type C (EU 2-pin) wall socket. Ensure it is securely seated.
CHACON Remote Outlet Plugged In

Image: A white CHACON remote-controlled outlet plugged into a wall socket, partially obscured by furniture.

  1. Pairing the Remote Control with Outlets:
    • Plug the receiver outlet into a wall socket. The indicator light on the outlet may flash briefly.
    • Within 5 seconds of plugging in the outlet, press the desired 'ON' button (e.g., '1 ON') on the remote control.
    • The outlet's indicator light should stop flashing and remain solid or turn off, indicating successful pairing.
    • Repeat this process for each of the four receiver outlets, assigning them to different 'ON'/'OFF' buttons (1-4) on the remote control.
  2. Připojit spotřebič: Plug the appliance you wish to control into the remote-controlled outlet.

Návod k obsluze

Once set up, operating the remote switches is straightforward.

  1. Turning On an Appliance: Press the corresponding 'ON' button (e.g., '1 ON') on the remote control for the desired outlet. The appliance connected to that outlet will turn on.
  2. Turning Off an Appliance: Press the corresponding 'OFF' button (e.g., '1 OFF') on the remote control for the desired outlet. The appliance connected to that outlet will turn off.
Operating CHACON Remote Control

Image: A hand holding the CHACON remote control, pointing it towards a floor lamp, demonstrating the remote operation.

The remote control operates on a frequency of 433.92 MHz and has a transmission distance of up to 25 meters in an open, free field environment. Obstacles such as walls and furniture may reduce this range.

Údržba

To ensure the longevity and proper functioning of your CHACON remote switches, follow these maintenance guidelines:

  • Čištění: Wipe the remote control and outlets with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Výměna baterie: If the remote control's range decreases or it stops responding, replace the CR2032 battery. Open the battery compartment on the back of the remote, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up.
  • Skladování: Pokud zařízení delší dobu nepoužíváte, skladujte je na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

Odstraňování problémů

If you encounter issues with your CHACON remote switches, refer to the following troubleshooting steps:

  • Appliance does not turn on/off:
    • Ensure the appliance is properly plugged into the remote outlet and is switched on (if it has its own power switch).
    • Verify the remote outlet is securely plugged into the wall socket and receiving power.
    • Check the remote control battery. Replace it if necessary.
    • Ensure you are within the effective transmission range (25m free field) and there are no significant obstructions.
    • Re-pair the remote control with the specific outlet following the 'Pairing the Remote Control with Outlets' steps in the Setup section.
  • Dálkové ovládání nereaguje:
    • Vyměňte baterii dálkového ovládání.
    • Ensure there are no other devices operating on the same 433.92 MHz frequency causing interference.

Specifikace

FunkceDetail
ZnačkaCHACON
Číslo modelu5411478546627
Číslo dílu54662
Kompatibilní zařízeníUnits with 2 pin Type C socket from EU
Zahrnuté komponenty4 Outlets + Remote Control + CR2032 Battery
svtage230 voltů
Max Wattage3680 wattů
Ampvymazat16 Amps
Frekvence433.92 MHz
Přenosová vzdálenost25 m (volné hřiště)
Typ baterie (dálkový)CR2032 Lithium-iontová baterie
MateriálPlast
BarvaBílý

Záruka a podpora

This CHACON product comes with a 2-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé za běžných podmínek používání.

For warranty claims, technical support, or further assistance, please contact your retailer or the CHACON customer service department. Please have your proof of purchase and product model number (5411478546627) available when contacting support.

© 2025 CHACON. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.