Uživatelská příručka k držáku na TV Atlantic Spring Arm

Důležité bezpečnostní pokyny

Please read this manual thoroughly before installation and use. Improper installation or use may cause serious injury or damage. Keep this manual for future reference.

• Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a televizoru.
• Nepřekračujte maximální nosnost 30 kg (66 liber).
• Tento držák je určen pro televizory s úhlopříčkou od 23 do 65 palců.
• Během instalace vždy používejte vhodné bezpečnostní vybavení.
• Nepřetahujte šrouby, mohlo by dojít k poškození.
• Udržujte malé části mimo dosah dětí.
• Pokud máte jakékoli pochybnosti o instalaci, poraďte se s kvalifikovaným odborníkem.

Konec produktuview

The Atlantic Spring Arm TV Mount provides a full-motion solution for mounting your television, allowing for effortless adjustment in multiple directions. Its robust design ensures your TV is held securely while offering optimal viewing úhly.

Technické specifikace

Průvodce instalací

Follow these steps carefully to ensure proper and secure installation of your TV mount. Professional installation is recommended for optimal safety and performance.

Krok 1: Příprava stěny

Locate a suitable wall stud for mounting. Use a stud finder to ensure the stud is solid and can support the weight. Mark the drilling locations accurately.

Step 2: Attaching Wall Plate

Drill pilot holes at the marked locations. Secure the wall plate of the mount to the wall using the provided lag bolts. Ensure it is level and tightly fastened.

Step 3: Attaching VESA Plate to TV

Attach the VESA mounting plate to the back of your TV using the appropriate screws. Ensure the screws are compatible with your TV's VESA pattern and are securely tightened.

Step 4: Mounting TV to Arm

Carefully lift the TV with the attached VESA plate and hook it onto the mount's arm. Secure the TV to the arm using the locking mechanisms or screws as per the detailed instructions in the full PDF manual.

Krok 5: Správa kabelů

Utilize the integrated cable management system to route and conceal your TV cables. This helps maintain a clean and organized appearance.

Operating Your TV Mount

The Atlantic Spring Arm TV Mount offers versatile positioning for optimal viewing. Once installed, you can easily adjust your TV's position.

• Prodloužení/zatažení: Gently pull or push the TV to extend or retract the arm from the wall.



• Otočný: Rotate the TV horizontally to achieve a 360-degree swivel for viewing from different angles in the room.



• Náklon: Adjust the vertical angle of the TV to reduce glare or optimize viewing výška.

Údržba

To ensure the longevity and smooth operation of your Atlantic Spring Arm TV Mount, perform the following maintenance:

• Čištění: Otřete držák měkkým, suchým hadříkem, abyste odstranili prach. V případě odolných skvrn použijte lehceamp hadříkem a jemným čisticím prostředkem a poté důkladně osušte. Nepoužívejte abrazivní čisticí prostředky.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Mazání: The spring arm mechanism is designed for maintenance-free operation. Do not attempt to lubricate internal components.

Odstraňování problémů

If you encounter issues with your TV mount, refer to the common problems and solutions below. For detailed visual guidance on balance adjustment, please watch the official video provided.

Arm Balance Adjustment

The spring arm tension needs to be adjusted to match the weight of your TV for effortless movement. This adjustment is crucial for the mount to hold its position correctly.

• Problem: TV remains in an UP position (TV is too light for current arm settings).
  Řešení: Push the TV down to a lower position. Locate the balance adjustment screw (often near a yellow dot/sticker on the arm). Use the hex key to turn the screw VE SMĚRU HODINOVÝCH RUČIČEK. Test the arm balance after each turn until the TV holds its position easily.
• Problem: TV droops DOWN after attaching (TV is too heavy for current arm settings).
  Řešení: You will likely need an extra set of hands for this. Gently lift the TV to an elevated position. Use the hex key to turn the balance adjustment screw PROTI SMĚRU HODINOVÝCH RUČIČEK. Test the arm balance after each turn until the TV holds its position easily.

For a visual demonstration of the balance adjustment process, please refer to the official video below:

Záruka a zákaznická podpora

Atlantic products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the full user manual PDF available for download.

For further assistance, technical support, or warranty claims, please visit the official Atlantic website or contact their customer service department. You can also refer to the comprehensive User Manual (PDF) for more detailed information:

Stáhnout kompletní uživatelskou příručku (PDF)