FLEXISPOT E6+180 Standing Desk

1. Úvod

Thank you for choosing the FLEXISPOT E6+180 Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read this manual thoroughly before installation and use, and keep it for future reference.

The FLEXISPOT E6+180 is a robust and versatile electric standing desk designed to promote a healthier work environment by allowing seamless transitions between sitting and standing positions. It features a dual-motor, three-stage lifting system for smooth and stable height adjustments.

1.1 Důležité bezpečnostní informace

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This desk is intended for indoor use only.

1.2 Obsah balení

Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support immediately. Typical components include:

• Rám stolu (nohy, příčka)
• Povrch stolního počítače
• Ovládací panel
• Napájecí adaptér a kabel
• Mounting Hardware (Screws, Allen Keys)
• Příslušenství pro správu kabelů

2. Bezpečnostní pokyny

• Nosnost: Nepřekračujte maximální nosnost 125 kg (275 liber). Přetížení může způsobit poškození stolu a možné zranění.
• Body sevření: Keep hands, fingers, and other body parts clear of moving parts, especially during height adjustments, to avoid pinching or crushing injuries.
• Zdroj napájení: Connect the desk only to a properly grounded power outlet with the correct voltage, jak je uvedeno na napájecím adaptéru.
• Správa kabelů: Ensure all cables are properly routed and secured to prevent tripping hazards or damage during desk movement.
• Děti a domácí mazlíčci: Keep children and pets away from the desk during operation. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
• Rozlití kapaliny: Avoid spilling liquids on the control panel or electrical components. In case of a spill, immediately unplug the desk and allow it to dry completely before reconnecting power.
• Nerovné povrchy: Do not operate the desk on uneven surfaces. Ensure the desk is stable and level before use.
• Modifikace: Do not attempt to modify or disassemble the desk's electrical components. Repairs should only be performed by qualified service personnel.
• Podmínky prostředí: Do not use the desk in excessively humid or dusty environments.

3. Nastavení a montáž

Assembly typically requires two people. Ensure you have enough space and all tools provided or required (e.g., screwdriver).

1. Rozbalte komponenty: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., carpet or blanket) to prevent scratches.
2. Assemble Legs to Crossbar: Attach the lifting columns (legs) to the central crossbar according to the diagrams in your specific assembly guide. Secure with the provided screws.
3. Připevněte nožičky: Secure the desk feet to the bottom of the lifting columns using the appropriate screws.
4. Připojit plochu: Carefully place the desktop surface upside down on your soft surface. Position the assembled frame onto the desktop, aligning the pre-drilled holes. Secure the frame to the desktop using the provided screws.
5. Connect Control Box and Motors: Connect the motor cables from each leg to the control box. Connect the control panel cable to the control box. Ensure all connections are firm.
6. Instalace ovládacího panelu: Mount the control panel to the underside of the desktop in a convenient location using the provided screws.
7. Správa kabelů: Use the included cable ties or clips to neatly route and secure all cables, preventing them from dangling or interfering with desk movement.
8. Připojte napájení: Plug the power adapter into the control box, then plug the power cable into a grounded electrical outlet.
9. Initial Calibration (if required): Some models may require an initial calibration. Refer to your specific model's quick start guide for instructions, typically involving pressing and holding the 'down' button until the desk reaches its lowest point and slightly retracts.

Note: No product images or videos were provided in the input. Therefore, visual aids for assembly steps cannot be embedded here. Please refer to the physical assembly guide included with your product for detailed diagrams.

4. Návod k obsluze

4.1 Základní nastavení výšky

• Zvedněte stůl: Stiskněte a podržte NAHORU (▲) button to raise the desk to your desired standing height. Release the button to stop.
• Spodní stůl: Stiskněte a podržte DOLŮ (▼) button to lower the desk to your desired sitting height. Release the button to stop.

4.2 Nastavení předvoleb paměti

Your desk features memory buttons (usually M1, M2, M3, M4) to save your preferred sitting and standing heights for quick adjustments.

1. Nastavte stůl do požadované výšky pomocí tlačítek NAHORU/DOLŮ.
2. Stiskněte tlačítko M. or 'SOUBOR' button (if available) once. The display may show 'S-' or 'MEM'.
3. Within 3 seconds, press the desired memory button (e.g., 1, 2, 3nebo 4). The display will show 'S-1', 'S-2', etc., or a confirmation beep, indicating the height is saved.
4. Repeat for other desired heights.

4.3 Using Memory Presets

To move the desk to a saved height, simply press the corresponding memory button (e.g., 1). The desk will automatically move to the saved position. Press any button to stop the movement.

4.4 Pokročilé funkce (pokud existují)

• Dětský zámek: Some models have a child lock feature. To activate/deactivate, typically press and hold the 'M' button for 5 seconds until 'LOC' appears/disappears.
• Protikolizní systém: The desk is equipped with an anti-collision feature that stops and slightly reverses movement if it encounters an obstacle. Ensure the sensitivity is appropriate for your environment.

5. Údržba

5.1 Čištění

• Desktop Surface: Očistěte povrch pracovní plochy měkkým,amp hadříkem a jemným, neabrazivním čisticím prostředkem. Vyhněte se agresivním chemikáliím nebo abrazivním materiálům, které by mohly poškodit povrchovou úpravu.
• Rám a nohy: Wipe down the metal frame and legs with a dry or slightly damp tkanina.
• Ovládací panel: Use a dry, soft cloth to clean the control panel. Do not spray cleaners directly onto the panel.
• Před čištěním: Always unplug the desk from the power outlet before cleaning.

5.2 Pravidelné kontroly

• Utáhněte šrouby: Periodically check all screws and bolts to ensure they are tight. Loose fasteners can affect stability and performance.
• Stav kabelu: Inspect power cables and motor cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
• Hladký provoz: Ensure the desk moves smoothly without unusual noises or jerky movements. If issues arise, refer to the troubleshooting section.

6. Řešení problémů

If you encounter any issues with your FLEXISPOT E6+180 desk, please consult the table below before contacting customer support.

7. Specifikace

8. Záruka a zákaznická podpora

8.1 Informace o záruce

FLEXISPOT products are manufactured with high-quality materials and craftsmanship. This product is covered by a limited warranty against defects in materials and workmanship. The specific warranty period may vary by component (e.g., frame, motor, control panel). Please refer to the warranty card included with your purchase or visit the official FLEXISPOT webpodrobné záruční podmínky naleznete na webu.

The warranty typically covers manufacturing defects and does not cover damage caused by improper assembly, misuse, neglect, unauthorized modifications, or normal wear and tear.

8.2 Zákaznická podpora

If you have any questions, require assistance with assembly, or encounter issues not covered in the troubleshooting section, please do not hesitate to contact FLEXISPOT customer support. Have your model number and purchase information ready when contacting support.

Nejnovější kontaktní informace naleznete na oficiálních stránkách FLEXISPOT. webmísto:

www.flexispot.com