Amazon Basics DS-110SAM Small Slim Desk Drawer Security Safe User Manual

Zavedení

This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.

Důležité bezpečnostní informace

• Do not store the emergency override keys inside the safe. Keep them in a secure, separate location.
• Ensure the safe is mounted securely to prevent unauthorized removal.
• This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
• Udržujte klávesnici suchou a čistou. Nepoužívejte abrazivní čisticí prostředky.

Obsah balení

• Amazon Basics DS-110SAM Security Safe
• Nouzové klíče pro přepínání (2)
• Montážní materiál (šrouby, hmoždinky)
• Návod k použití (tento dokument)

Nastavení

1. Instalace baterie

1. Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
2. Najděte přihrádku na baterie na vnitřní straně dvířek trezoru.
3. Vložte 4 nové baterie typu AA a dbejte na správnou polaritu (+/-).
4. Zavřete kryt prostoru pro baterie.

2. Nastavení osobního kódu

Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
2. On the keypad, enter your new personal code (3 to 8 digits).
3. Stiskněte a držet the '#' button to confirm. You will hear a confirmation beep.
4. Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.

3. Montáž trezoru

For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.

Image: Back of the safe with pre-drilled mounting holes.

1. Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
2. Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
3. Drill pilot holes into the surface.
4. Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.

Image: The safe positioned within a desk drawer, demonstrating its intended use.

Obsluha trezoru

Obrázek: Přední strana view of the safe, highlighting the electronic keypad and locking mechanism.

1. Opening with Electronic Keypad

1. Enter your personal code (3 to 8 digits).
2. Press the '#' button. The green light will illuminate.
3. Do 5 sekund otočte knoflíkem ve směru hodinových ručiček a otevřete dvířka trezoru.

2. Opening with Emergency Override Key

Use this method if you forget your code or if the batteries are depleted.

Image: Close-up of the keypad with an emergency key in use.

1. Gently remove the keypad cover to reveal the keyhole.
2. Vložte jeden z nouzových klíčů do klíčové dírky.
3. Turn the key clockwise and simultaneously turn the knob to open the safe door.
4. Once open, you can replace the batteries if needed or reset your code.

3. Zavření a uzamčení trezoru

1. Zavřete dveře trezoru.
2. Otočte knoflíkem proti směru hodinových ručiček, abyste zajistili zajišťovací šrouby. Trezor je nyní uzamčen.

Image: Detail of the live-door bolts, which provide security when the safe is locked.

Údržba

1. Výměna baterie

When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.

2. Čištění

Otřete vnější stranu trezoru měkkým hadříkemamp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.

Odstraňování problémů

• Trezor se neotevírá kódem:
  • Ujistěte se, že jsou baterie čerstvé a správně nainstalované.
  • Verify you are entering the correct code and pressing '#' firmly.
  • Try using the emergency override key.
• Klávesnice nereaguje:
  • Vyměňte baterie.
  • Ujistěte se, že tlačítkům nebrání žádné nečistoty.
• Dveře se nezavírají správně:
  • Zkontrolujte, zda uvnitř trezoru nebo kolem rámu dveří nejsou nějaké překážky.
  • Ensure the locking bolts are fully retracted before attempting to close.

Specifikace

Informace o záruce

For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics webZáruční podmínky se mohou lišit.

Zákaznická podpora

If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official webnebo kontaktní informace poskytnuté při nákupu.