Vont VNT-BL02

Vont Pyro USB Rechargeable Bike Light Set Instruction Manual

Model: VNT-BL02

Konec produktuview

The Vont Pyro USB Rechargeable Bike Light Set provides essential illumination for cycling safety. This set includes both a front and a rear light, each featuring multiple lighting modes and a durable, water-resistant design. The lights are easily rechargeable via USB, ensuring convenience and readiness for your rides.

Co je v krabici

  • 1 Přední světlo
  • 1 Zadní světlo
  • 2 USB kabely
  • Popruhy 4

Nastavení a instalace

Nabíjení světel

Before first use, fully charge both the front and rear lights. The charging port is located underneath the flap marked "USB" on the side of each light. Pull back the rubber flap to expose the micro-USB port. Insert the provided USB cable into the port and connect the other end to a USB power source (e.g., computer, wall adapter). The charging indicator light, located beside the steel bezel, will turn green when the light is fully charged. A full charge typically takes approximately 3 hours.

Připevnění světel

The Vont Pyro Bike Lights feature a flexible silicone strap for easy, tool-free installation. Each light also has a built-in clip for alternative mounting options.

  1. Instalace popruhu: Attach one end of a silicone strap to the hook on the back of the light. Wrap the strap around your bicycle's handlebar (for the front light) or seat post (for the rear light). Secure the free end of the strap to the remaining hook on the light. Ensure the light is firmly attached and facing the desired direction.
  2. Instalace klipu: For additional versatility, the lights can be clipped onto backpacks, clothing, or other gear. Simply use the integrated clip on the back of each light to secure it to a suitable edge or loop.
Vont Pyro Bike Lights being splashed with water, demonstrating IPX4 water resistance.

Image: Vont Pyro Bike Lights demonstrating their IPX4 water-resistant design, suitable for use in various weather conditions.

Návod k obsluze

Zapnutí/vypnutí a výběr režimu

Each Vont Pyro Bike Light features a single button on its top for power control and mode cycling.

  • Zapnutí: Press the button once. The light will turn on in its default mode.
  • Cyklování režimů: Press the button repeatedly to switch between the four available lighting modes.
  • Vypnutí: Continue pressing the button until the light turns off, or press and hold the button for a few seconds.

Režimy osvětlení

The Vont Pyro Bike Light Set offers four distinct lighting modes to suit different visibility needs:

  • Plný jas: Provides maximum illumination.
  • Half Brightness: Offers reduced brightness for extended battery life.
  • Slow Flashing Mode: A steady, rhythmic flash for enhanced visibility.
  • Fast Flashing Mode: A rapid flash pattern for high-alert situations.
A bicycle with Vont Pyro lights installed, showing the front white light illuminating the path and the rear red light for visibility.

Image: A bicycle equipped with Vont Pyro lights, demonstrating the effectiveness of the front and rear lights in illuminating the surroundings and ensuring rider visibility.

Údržba

Životnost baterie

The lights are equipped with built-in 650 mAh rechargeable lithium batteries. Battery life varies depending on the selected mode:

Světelný režimHead Light (hours)Tail Light (hours)
Plný jas3.52.5
Half Brightness109
Slow Flashing Mode10.59.5
Fast Flashing Mode109

Voděodolnost

The Vont Pyro Bike Light Set is rated IPX4 water-resistant, meaning it is protected against splashing water from any direction. This allows for safe use in rain and other wet conditions. However, it is not designed to be submerged in water.

Vont Pyro Bike Lights used in various scenarios: clipped to a dog collar, a shoe, and a backpack, highlighting their multi-use capability.

Image: The Vont Pyro Bike Lights demonstrating their versatility by being attached to a dog collar, a shoe, and a backpack, making them suitable for various outdoor activities beyond cycling.

Odstraňování problémů

  • Světlo se nerozsvítí: Ensure the battery is fully charged. Connect the light to a USB power source and check if the charging indicator turns red (charging) or green (fully charged).
  • Světlo nedrží nabití: Verify that the USB cable is securely connected to both the light and the power source. If the issue persists, try a different USB cable or power adapter.
  • Padání světla během jízdy: Ensure the silicone strap is properly secured and tightened around the handlebar or seat post. If using the clip, confirm it is firmly attached to a stable part of your gear.

Specifikace

  • Značka: Vont
  • Model: VNT-BL02
  • Barva: Černá a červená
  • Materiál: Akrylonitril-butadien-styren
  • Zdroj napájení: Napájení z baterie
  • Úroveň odolnosti proti vodě: IPX4 (voděodolný)
  • Hmotnost položky: 1.45 uncí
  • Typ montáže: Handlebar Mount, Clip
  • Počet nastavení: 4
  • Light Output Maximum: 80 XNUMX lumenů
  • Doba nabíjení: 3 hodin
  • Baterie: Built-in 650 mAh rechargeable lithium battery

Záruka a podpora

Doživotní záruka

The Vont Pyro Bike Light Set is backed by a lifetime warranty. It is covered against loss, theft, and defects in materials and workmanship for as long as you own the product.

Zákaznická podpora

For any questions, assistance, or to access the online instruction manual, please contact Vont customer support at podpora@vont.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.