Dracast DRBRPLLK3X600BH

Dracast BoltRay Plus Bi-Color LED600 3-Light Kit Instruction Manual

Model: DRBRPLLK3X600BH

1. Úvod a bezpečnostní informace

This manual provides essential instructions for the safe and effective operation of your Dracast BoltRay Plus Bi-Color LED600 3-Light Kit. Please read this manual thoroughly before use and retain it for future reference.

Důležitá bezpečnostní opatření:

  • Neobsluhujte jednotku mokrýma rukama ani v blízkosti vody.
  • Zajistěte správné větrání, aby nedošlo k přehřátí. Neblokujte ventilační otvory.
  • Use only the specified power adapter. Disconnect power before cleaning or servicing.
  • Zabraňte přímému vystavení očí LED světelnému zdroji.
  • Keep the equipment away from flammable materials.
  • Nepokoušejte se jednotku rozebírat ani upravovat. Veškerý servis svěřte kvalifikovanému personálu.
  • Securely mount the lights to prevent accidental falls.

2. Obsah balení

Verify that all items listed below are present in your kit:

  • 3x Dracast BoltRay LED600 Plus Bi-Color Light Fixtures
  • 3x 4-Way Barndoors
  • 3x Removable Diffusion Filters
  • 3x Mounting Yokes (pre-attached to lights)
  • 3x dálkový ovladač
  • 3x Multi-Voltage AC Power Adapters
  • 1x Soft Nylon Carrying Case
  • 1x Injection-Molded Travel Case
Dracast BoltRay Plus LED600 Kit Components

Image 2.1: All components of the Dracast BoltRay Plus LED600 3-Light Kit laid out, including three light fixtures, barndoors, diffusion filters, power adapters, remote controls, and carrying cases.

Dracast BoltRay Plus LED600 3-Light Kit assembled

Image 2.2: The Dracast BoltRay Plus LED600 3-Light Kit fully assembled on light stands, with the soft nylon carrying case in the foreground.

3. Nastavení

Follow these steps to set up your Dracast BoltRay Plus LED600 light fixture:

  1. Montáž světla: Attach the light fixture, using its integrated U-shaped yoke, to a compatible light stand or mounting accessory. Ensure the mounting knob is securely tightened.
  2. Attaching Barndoors: Align the 4-way barndoors with the front of the light fixture and secure them using the locking mechanism. The barndoors allow for shaping the light beam.
  3. Installing Diffusion Filter: If softer light is desired, insert the removable diffusion filter into the designated slot on the front of the light, behind the barndoors.
  4. Napájení světla:
    • Napájení střídavým proudem: Connect the multi-voltage AC power adapter to the DC input port on the light fixture. Plug the other end into a suitable power outlet.
    • Napájení baterie: For portable operation, insert two compatible NP-F type batteries (sold separately) into the dual battery plates on the rear of the light fixture. Ensure correct polarity.
Close-up of Dracast BoltRay Plus LED600 light head with barndoors

Obrázek 3.1: Detailní záběr view of the Dracast BoltRay Plus LED600 light head, showing the central COB LED, attached 4-way barndoors, and the blue mounting bracket.

4. Návod k obsluze

The Dracast BoltRay Plus LED600 offers precise control over light intensity and color temperature.

4.1. Obsluha ovládacího panelu

The control panel is located on the rear of the light fixture and features an LCD digital display and control knobs.

Dracast BoltRay Plus LED600 control panel and side view

Obrázek 4.1: Boční strana view of the Dracast BoltRay Plus LED600 light, highlighting the rear control panel with its LCD display, control knobs, and power input ports.

  • Zapnutí/vypnutí: Locate the power switch on the control panel and toggle it to the 'ON' position. The LCD display will illuminate.
  • Adjusting Intensity (Dimming): Use the "INTENSITY" control knob to adjust the light output from 0% to 100%. The current intensity level will be shown on the LCD display.
  • Úprava teploty barev: Use the "COLOR TEMP" control knob to change the color temperature from 3200K (warm tungsten) to 5600K (cool daylight). The selected color temperature will be displayed.

4.2. Dálkové ovládání

The included remote control allows for wireless adjustment of intensity and color temperature.

  • Ujistěte se, že dálkové ovládání má funkční baterie.
  • Point the remote control towards the light fixture's sensor.
  • Use the designated buttons on the remote to increase/decrease intensity and adjust color temperature. Refer to the remote's markings for specific functions.

5. Údržba

  • Čištění: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the light fixture. Do not use harsh chemicals or abrasive cleaners.
  • Skladování: When not in use, store the light kit in the provided travel case in a cool, dry place, away from direct sunlight and excessive dust.
  • Péče o baterie: If using NP-F batteries, remove them from the fixture during extended periods of non-use to prevent discharge or leakage.

6. Řešení problémů

ProblémMožná příčinaŘešení
Světlo se nerozsvítí.No power, faulty connection, dead batteries.Check power cable connection. Ensure AC adapter is plugged in. If using batteries, check battery charge or replace. Verify power switch is ON.
Světlo bliká nebo je nestabilní.Loose power connection, low battery, interference.Secure all power connections. Recharge or replace batteries. Move away from potential sources of electromagnetic interference.
Dálkové ovládání nefunguje.Dead batteries, obstructed signal, out of range.Replace remote control batteries. Ensure a clear line of sight to the light's sensor. Operate within the specified range.
Light is too hot.Zablokované větrání, dlouhodobé používání při vysoké okolní teplotě.Ensure ventilation openings are clear. Operate in a well-ventilated area. Reduce intensity if necessary.

7. Specifikace

FunkceDetail
ModelDRBRPLLK3X600BH
Typ světlaDvoubarevná COB LED
Teplota barev3200K - 5600K (Variable)
Index podání barev (CRI)96
Stmívání0-100% (PWM Technology)
Úhel paprsku45 stupňů
Spotřeba energie60W per fixture
Vstup napájeníVícesvtage AC adapter, Dual NP-F battery plates
ChlazeníVirtually silent fan
KonstrukceKovů a plastů
Rozměry (na světlo)13.7 x 6.1 x 13.5 palce
Hmotnost (sada)12.5 libry

8. Záruka a podpora

Dracast products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Dracast website. For technical support or service inquiries, please contact Dracast customer service directly.

Výrobce: Draco Broadcast, INC.

Webmísto: www.dracast.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.