Globe Electric 63361

Globe Electric Gatineau 63361 Floor Lamp Návod k použití

Model: 63361

Zavedení

Děkuji za nákupasing the Globe Electric Gatineau 63361 Floor Lamp. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new floor lampPřed použitím si pečlivě přečtěte všechny pokyny a uschovejte si tento návod pro budoucí použití.

Bezpečnostní informace

  • Ensure the power is disconnected before assembly, cleaning, or replacing the bulb.
  • Nepřekračujte maximální watttage specified for the bulb (150W maximum).
  • Tento lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
  • Nechte si lamp daleko od hořlavých materiálů.
  • Always use the correct bulb type (E26/medium base A21).
  • Pokud je kabel poškozen, lamp should not be used. Contact qualified personnel for repair.
  • Umístěte lamp na stabilním rovném povrchu, aby se zabránilo převrácení.

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny.

  • Lamp Báze
  • Lamp Pole Sections (typically multiple screw-together sections)
  • Lamp Head/Socket Assembly
  • Alabastrové skleněné stínidlo
  • Shade Ring (pre-installed on socket)
  • Information Sheet (this manual)
Globe Electric Gatineau Floor Lamp obalová krabice

Image: Packaging box for the Globe Electric Gatineau Floor Lamp, showing the lamp's design and brand logo.

Nastavení a montáž

Pro montáž podlahy postupujte podle těchto krokůamp:

  1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu. Položte je na měkký, čistý povrch, abyste zabránili poškrábání.
  2. Sestavte Lamp Pól: Zašroubujte lamp pole sections together clockwise until secure. Ensure all connections are tight.
  3. Připojit Lamp Od tyče k základně: Thread the bottom section of the assembled lamp kůl do lamp base. Turn clockwise until firmly attached.
  4. Nainstalovat L.amp Hlava: Pokud lamp head is separate, carefully attach it to the top of the lamp pole. Ensure the electrical wire passes freely through the pole.
  5. Instalace skleněného stínítka:
    • Unscrew the shade ring from the lamp zásuvka.
    • Place the alabaster glass shade over the socket.
    • Screw the shade ring back onto the socket to secure the glass shade. Do not overtighten.
    Detail lamp's top section with alabaster glass shade and dark bronze torchiere arms

    Obrázek: Detailní záběr view z lamp's upper structure, showing the alabaster glass shade resting on the dark bronze torchiere arms and socket.

  6. Vložte žárovku: Screw one E26/medium base A21 bulb (150-watt maximum, sold separately) into the lamp zásuvka.
  7. Pozice Lamp: Umístěte lamp in your desired location, ensuring the cord is not pinched or a tripping hazard.

Návod k obsluze

Your Gatineau Floor Lamp features a rotary switch for easy control.

  1. Připojení k napájení: Zapojte lampnapájecí kabel do standardní elektrické zásuvky 120 V.
  2. Turn On/Off and Adjust Brightness: Locate the rotary switch on the lamp zásuvka.
    • Turn the switch clockwise to cycle through low, medium, and high light levels.
    • Continue turning to switch the lamp vypnuto.
Globe Electric Gatineau Floor Lamp osvětlení obývacího pokoje

Image: The Globe Electric Gatineau Floor Lamp providing ambient light in a modern living room setting.

Údržba

  • Čištění:
    • Vždy odpojte lamp před čištěním.
    • Otřete lamp base and pole with a soft, dry cloth.
    • For the glass shade, use a soft, damp cloth and a mild glass cleaner if necessary. Ensure the shade is completely dry before reattaching or turning on the lamp.
  • Výměna žárovky:
    • Ujistěte se, že lamp je odpojena od sítě a žárovka zcela vychladla.
    • Odšroubujte starou žárovku proti směru hodinových ručiček.
    • Screw in a new E26/medium base A21 bulb (150-watt maximum) clockwise until snug. Do not overtighten.

Odstraňování problémů

ProblémMožná příčinaŘešení
Lamp nesvítí.
  • 1. Lamp není zapojeno.
  • 2. Bulb is loose or burnt out.
  • 3. Power outlet is not functioning.
  • 1. Ensure the plug is fully inserted into the outlet.
  • 2. Tighten or replace the bulb.
  • 3. Test the outlet with another appliance or check the circuit breaker.
Lamp bliká.
  • 1. Uvolněná žárovka.
  • 2. Nesprávná žárovka wtage.
  • 1. Tighten the bulb.
  • 2. Ujistěte se, že žárovka má hodnotutage is within the specified range (150W max).
Lamp je nestabilní.
  • 1. Pole sections not fully tightened.
  • 2. Lamp base not on a level surface.
  • 1. Re-tighten all pole sections.
  • 2. Přesuňte lamp na rovný, stabilní povrch.

Specifikace

Číslo modelu63361
ZnačkaGlobe Electric
Rozměry (D x Š x V)10.24"H x 13"Š x 70.75"V (25.4 cm H x 33 cm Š x 179.7 cm V)
Hmotnost položky1 libry
Typ dokončeníSatin Dark Bronze
Materiál stínidlaAlabastrové sklo
Základní materiálKov
Základna žárovkyE26 Střední
Max Wattage150 wattů
svtage120 voltů
Typ přepínačeRotační
Zdroj napájeníElektrický kabel
Vnitřní/venkovní použitíKrytý
Diagram showing the dimensions of the Globe Electric Gatineau Floor Lamp

Image: A diagram illustrating the key dimensions of the floor lamp, including height (70.75 inches), shade width (13 inches), and base diameter (10.24 inches).

Záruka a podpora

Záruka: The manufacturer states "No warranty." for this product. Please refer to your retailer's return policy for details on returns or exchanges.

Zákaznická podpora: For further assistance or inquiries, please visit the official Globe Electric store or contact your retailer.

Visit the Globe Electric Store on Amazon

© 2026 Globe Electric. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.