Zavedení
This manual provides comprehensive instructions for the safe and effective operation of your Dracast LED Fresnel 1000 Daylight LED Light. Please read this manual thoroughly before use and retain it for future reference. The Dracast Fresnel 1000 Daylight is a professional LED lighting fixture designed for studio and location use, offering a 5600K daylight-balanced output, adjustable beam angle, and DMX control capabilities.
Bezpečnostní pokyny
- Always ensure the power supply matches the specified voltage (100-240 VAC).
- Nepoužívejte světlo ve vlhkém neboamp podmínky.
- Zabraňte přímému vystavení očí LED světelnému zdroji.
- Zajistěte řádné větrání kolem zařízení, abyste zabránili přehřátí.
- Nepokoušejte se jednotku rozebírat ani upravovat. Veškerý servis svěřte kvalifikovanému personálu.
- Securely mount the fixture using appropriate stands and clamps.
- Uchovávejte mimo dosah dětí.
Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Dracast Fresnel Studio LED1000 Daylight LED Light
- 4-Way Barndoors
- Napájecí adaptér
Vlastnosti produktu
- 7-inch Fresnel Lens
- Adjustable Beam Angle: 15-60 Degrees
- Daylight Balance: 5600K
- Index podání barev (CRI): >95
- Yoke with 5/8-inch Receiver for stand mounting
- Equivalent to 1000W Tungsten Halogen output
- Onboard DMX512 control
- Power Options: 100-240 VAC Mains or 24 VDC Battery (battery not included)
- 0-100% Dimming capability
- Silent Passive Heat Sink Cooling System
Nastavení
Obrázek 1: The Dracast LED Fresnel 1000 Daylight LED Light, shown with its four-way barndoors open, mounted on a light stand. The blue control panel with a digital display and DMX ports is visible on the side of the fixture.
- Montáž svítidla: Attach the light fixture's yoke to a compatible light stand using the 5/8-inch receiver. Ensure the fixture is securely tightened to prevent accidental movement.
- Attaching Barndoors: Slide the included 4-way barndoors onto the front of the Fresnel lens. Secure them in place using the integrated clips or locking mechanism.
- Připojení napájení:
- Napájení střídavým proudem: Connect the AC power adapter to the fixture's power input and then plug it into a standard 100-240 VAC electrical outlet.
- DC Battery Power (Optional): If using a 24 VDC battery (not included), connect it to the appropriate DC input port on the fixture.
Návod k obsluze
- Zapnutí/vypnutí: Locate the power switch on the control panel and toggle it to the 'ON' position. The digital display will illuminate.
- Nastavení jasu (stmívání): Use the dedicated dimming knob or buttons on the control panel to adjust the light output from 0% to 100%. The current brightness level will be shown on the digital display.
- Adjusting Beam Angle (Spot/Flood): Rotate the knob or lever on the side of the fixture to adjust the beam angle between 15 degrees (spot) and 60 degrees (flood). This changes the spread and intensity of the light.
- DMX ovládání:
- Connect a DMX controller to the fixture's DMX IN port using a standard DMX cable.
- If chaining multiple DMX fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next.
- Set the DMX address on the fixture's control panel according to your DMX system's configuration. Refer to your DMX controller's manual for specific addressing instructions.
- The fixture supports DMX512 protocol for remote control of brightness and other functions.
- Using Barndoors: Adjust the individual leaves of the 4-way barndoors to shape the light beam and control spill.
Údržba
- Čištění: Use a soft, dry cloth to clean the exterior of the fixture. For the Fresnel lens, use a lens cleaning solution and a microfiber cloth to avoid scratches. Do not use harsh chemicals or abrasive materials.
- Větrání: Ensure the passive heat sink fins are free from dust and obstructions to maintain efficient cooling.
- Skladování: Pokud světlo nepoužíváte, skladujte ho v suchém a bezprašném prostředí, nejlépe v originálním obalu nebo ochranném pouzdře.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power supply; faulty cable; power switch off. | Check power cable connection; ensure power outlet is functional; verify power switch is 'ON'. |
| Světelný výstup je nekonzistentní nebo bliká. | Loose power connection; DMX signal issue; faulty dimmer. | Secure power connections; check DMX cable and controller settings; test with local dimming. |
| DMX ovládání nefunguje. | Nesprávná DMX adresa; vadný DMX kabel; problém s DMX ovladačem. | Verify DMX address setting; check DMX cable connections; test with a different DMX cable or controller. |
| Svítidlo se zdá být nadměrně horké. | Obstructed ventilation; prolonged use in high ambient temperatures. | Ensure heat sink fins are clear; operate in a well-ventilated area. The unit uses passive cooling and will generate heat during operation. |
Specifikace
| Model | Dracast Fresnel 1000 Daylight |
| Světelný zdroj | LED |
| Teplota barev | 5600 K (denní světlo) |
| CRI | >95 |
| Úhel paprsku | 15-60 Degrees (Adjustable) |
| Stmívání | 0–100 % |
| Řízení | Onboard, DMX512 |
| Vstup napájení | 100-240 VAC, 24 VDC |
| Chlazení | Passive Heat Sink (Silent) |
| Montáž | Yoke with 5/8-inch Receiver |
| Hmotnost položky | 28 libry |
| UPC | 683405283584 |
Informace o záruce
The Dracast LED Fresnel 1000 Daylight LED Light comes with a Limited 1-Year Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or contact Dracast customer support.
Podpora
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Dracast customer support. Contact information can typically be found on the manufacturer's webmístě nebo na obalu produktu.