Zooz Momentary Push-Button in-Wall Switch ZAC99 Instruction Manual

Konec produktuview

The Zooz ZAC99 is a momentary push-button in-wall switch designed for various applications requiring temporary contact closure. It is suitable for controlling devices such as garbage disposals or as an accessory switch for Z-Wave dimmer modules to enable local dimming control. This device is not a Z-Wave switch itself but functions as a momentary contact switch.

Klíčové vlastnosti:

• Všestranná aplikace: Can be used for garbage disposals or as a local control for Z-Wave dimmer modules.
• Momentary Control: Activates a connected device only while the button is pressed.
• Flexibilní instalace: Compatible with 14 AWG and 12 AWG wires, supporting loads up to 15 A.
• Kompaktní design: Tenký profíkfile allows for easier installation in standard switch boxes.

Obrázek: Přední strana view of the Zooz ZAC99 Momentary Push-Button in-Wall Switch. This image shows the white paddle-style button and the mounting frame.

Bezpečnostní informace

• VAROVÁNÍ: Risk of Electric Shock. All service should be performed by qualified personnel only.
• Disconnect power at the circuit breaker or fuse box before installation.
• Ujistěte se, že všechna elektroinstalace jsou bezpečná a splňují místní elektrotechnické předpisy.
• Toto zařízení je určeno pouze pro vnitřní použití.
• Nepřekračujte maximální nosnost 15 Amps.

Instalace (Nastavení)

Follow these steps for safe and proper installation of your Zooz ZAC99 Momentary Push-Button in-Wall Switch.

1. Vypnout napájení: Vyhledejte jistič ovládající umístění spínače a vypněte napájení. Ověřte, zda je napájení vypnuto pomocí regulátoru hlasitosti.tage tester.
2. Odebrat stávající přepínač: Carefully remove the wall plate and unscrew the existing switch from the electrical box. Disconnect the wires from the old switch.
3. Identifikace vodičů:
   • Vedení (žhavého) vodiče: Obvykle černá, přivádí napájení z jističe.
   • Zaváděcí drát: Typically black, connects to the light fixture or appliance.
   • Zemnící vodič: Bare copper or green, connects to the electrical box or ground screw.
4. Wire the ZAC99 Switch:
   

   Obrázek: Zpět view of the Zooz ZAC99 switch, illustrating the screw terminals for wiring connections.

   • Connect the Line (Hot) wire to one of the screw terminals on the ZAC99 switch.
   • Connect the Load wire to the other screw terminal on the ZAC99 switch.
   • Connect the Ground wire to the green ground screw on the switch or the electrical box.
   • Ensure all connections are tight and secure. The switch accepts 14 AWG and 12 AWG wires.
5. Namontujte spínač: Carefully push the wired switch into the electrical box. Secure it with the provided screws.
6. Instalace nástěnné desky: Attach the wall plate over the switch.
7. Obnovit napájení: Znovu zapněte napájení na jističi.

Poznámka: This switch is a momentary contact switch. It does not have a neutral wire connection and is designed for simple on/off momentary control. For advanced functionality with Z-Wave dimmer modules, refer to the specific instructions for your Z-Wave device regarding momentary switch configuration.

Návod k obsluze

The Zooz ZAC99 switch provides momentary control based on its application.

For Garbage Disposals or Similar Devices:

• Aktivovat: Press and hold the upper part of the paddle switch. The connected device (e.g., garbage disposal) will remain active as long as the button is held.
• Deaktivace: Release the button. The device will turn off.

When Used with a Z-Wave Dimmer Module (Accessory Control):

When configured with a compatible Z-Wave dimmer module (e.g., Aeotec ZW111, Fibaro FGD-212, Qubino ZMNHDD3, ZMNHWD3), the ZAC99 can provide local control for lighting.

• Zapnout/Vypnout: Tap the upper part of the paddle switch once to toggle the light on or off.
• Upravit jas: Press and hold the upper part of the paddle switch to adjust the brightness. Release when the desired brightness level is reached.

Důležité: The Z-Wave dimmer module must be configured to recognize a momentary switch for this functionality. Refer to your Z-Wave dimmer module's instruction manual for specific configuration settings (e.g., parameter settings for momentary switch type).

Údržba

The Zooz ZAC99 switch requires minimal maintenance.

• Čištění: Chcete-li vyčistit spínač, otřete jej měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Před čištěním se ujistěte, že je přístroj vypnutý.
• Pravidelné kontroly: Periodically check the wall plate and switch for any signs of damage or loose connections. If any issues are observed, turn off power and consult a qualified electrician.

Odstraňování problémů

If you experience issues with your ZAC99 switch, refer to the following common solutions:

• Zařízení nereaguje:
  • Ensure power is supplied to the switch at the circuit breaker.
  • Zkontrolujte, zda jsou všechna zapojení kabeláže bezpečná a správná.
  • Check the connected load (e.g., garbage disposal) to ensure it is functioning correctly.
• Not Controlling Z-Wave Dimmer Module:
  • Confirm that the Z-Wave dimmer module is properly installed and powered.
  • Ensure the Z-Wave dimmer module is configured to operate with a momentary switch. This usually involves adjusting a parameter in your Z-Wave hub or controller settings. Refer to the dimmer module's manual for specific instructions (e.g., Zooz Zen72, Option 19, set to Momentary switch).
  • Verify the wiring between the ZAC99 and the Z-Wave dimmer module is correct according to the dimmer module's accessory switch wiring diagram.
• Switch Feels Stiff or Hard to Press:
  • The switch is designed for a tactile click. If it feels unusually stiff or unresponsive, ensure it is properly seated in the electrical box and not obstructed by the wall plate.

Specifikace

Záruka a podpora

For warranty information or technical support, please contact Zooz directly. Refer to the official Zooz website or your purchase documentation for the most current support contact details and warranty terms.

Značka: ZOOZ

Výrobce: ZOOZ

Webmísto: Visit the ZOOZ Store on Amazon