SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Úvod

Děkuji za nákupasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Klíčové vlastnosti

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Co je v krabici

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
Kabel XLR
Napájecí adaptér (9V DC)
Uživatelská příručka

4. Pokyny k nastavení

4.1 Připojení napájení

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Audio připojení

Vstup pro kytaru: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Výstup do Ampzáchranář/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Sluchátkový výstup: For silent practice, connect headphones to the 'PHONES' jack.

SONICAKE RockStage pedal with input and output jacks — Obrázek 1: Přesview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampdoživotní — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Návod k obsluze

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Sbor: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Rock Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Zpoždění: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage prostředí.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Přenositelnost

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Specifikace

Funkce	Detail
Značka	SONICAKE
Název modelu	ROCKSTAGE (QCE-10)
Rozměry	40D x 7D x 5.5V cm
svtage	9 voltů
Ampvymazat	20 miliampere
Efekty zvukového výstupu	Overdrive, Distortion, Chorus, Reverb, Delay
Typ ovládání	Tlačítko, knoflík
Zdroj napájení	Elektrický kabel
Hardwarové rozhraní	Multiple Audio
Formát signálu	Analogový
Typ konektoru	Audio konektor 3.5 mm
Země původu	Čína

7. Údržba

Čištění: K čištění pedálu používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
Skladování: Pedál skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
Zacházení: Zabraňte pádu pedálu nebo jeho vystavení silným nárazům.
Moc: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Řešení problémů

Žádný zvuk:
- Ujistěte se, že jsou všechny kabely pevně připojeny.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and amplifier volume settings.
- Vyzkoušejte s různými kabely, abyste vyloučili chybné připojení.
Nežádoucí šum/hučení:
- Ensure you are using the correct power adapter.
- Zkuste použít jinou zásuvku.
- Keep the pedal away from other electronic devices that may cause interference.
Effect Not Activating:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Záruka a podpora

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1letá záruka na produkt od data nákupu.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE webmísto.