Uživatelská příručka k drátovému pokojovému termostatu Uponor Smatrix Base T-145

1. Konec produktuview

The Uponor Smatrix Base T-145 is a wired digital room thermostat designed for precise temperature control in heating and cooling systems, particularly underfloor heating. It directly transmits measured values to the Smatrix Base X-145 control module, ensuring efficient and responsive climate management. This thermostat features a clear digital display for easy temperature adjustment and monitoring.

Obrázek 1.1: Přední strana view of the Uponor Smatrix Base T-145 Wired Room Thermostat, showing its square white casing and central rotary dial for temperature adjustment. The 'Uponor' logo is visible at the bottom left.

2. Klíčové vlastnosti

• Digital Temperature Setting: Allows precise adjustment of the desired room temperature.
• Zobrazení verze softwaru: Shows the software version upon startup.
• Podsvícená obrazovka: The display illuminates for 10 seconds after activation for improved visibility.
• Indikátor vytápění/chlazení: Clearly displays the current operating mode.
• Setback Function: Enables energy-saving temperature reduction during unoccupied periods.
• Setback Temperature Display: Shows the active setback temperature.
• Výběr jednotky teploty: Přepínání mezi stupni Celsia a Fahrenheita.
• Displej stavu baterie: Indicates the status of any internal backup battery or connected sensor batteries.
• Flexible Sensor Options: Supports room temperature (RT), floor sensor with max/min limits (FT), remote sensor (FS), and outdoor sensor (RO) inputs.
• Individual Room Cooling: Capable of managing cooling functions on a room-by-room basis.

3. Technické specifikace

4. Bezpečnostní informace

Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

• Elektrická bezpečnost: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure power is disconnected at the main circuit breaker before any wiring work.
• Podmínky prostředí: Do not expose the thermostat to direct water spray, excessive humidity, or extreme temperatures outside its operating range. The device has an IP30 protection rating, meaning it is protected against solid objects over 2.5mm but not against water.
• Zamýšlené použití: This thermostat is designed for controlling heating and cooling systems. Do not use it for purposes other than its intended function.
• Čištění: K čištění používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.

5. Instalace a nastavení

The Uponor Smatrix Base T-145 thermostat is a wired device requiring connection to an Uponor Smatrix Base X-145 control module via a 4-wire bus system. Professional installation is recommended.

5.1 Montáž

1. Odpojení napájení: Ensure the main power supply to the heating/cooling system is turned off at the circuit breaker before beginning installation.
2. Výběr místa: Choose an indoor location on an interior wall, away from direct sunlight, drafts, and heat sources (e.g., lamps, appliances) that could affect temperature readings. Mount at a standard thermostat height (approximately 1.5 meters from the floor).
3. Zapojení: Connect the 4-wire bus cable from the Smatrix Base X-145 control module to the designated terminals on the T-145 thermostat. Refer to the wiring diagram provided with the Smatrix Base X-145 control module for specific terminal assignments.
4. Bezpečná montáž: Use the provided mounting hardware to securely attach the thermostat to the wall.

5.2 Počáteční nastavení

1. Zapnutí: Restore power to the system at the circuit breaker. The thermostat display should illuminate.
2. Software Version Check: Upon initial power-up, the software version will briefly display.
3. Jednotka teploty: If necessary, adjust the temperature unit between Celsius and Fahrenheit according to the operating instructions in Section 6.
4. Konfigurace senzoru: If using optional floor, remote, or outdoor sensors, ensure they are correctly connected and configured within the Smatrix Base X-145 control module. The thermostat can display readings from these sensors.

6. Provoz

The Uponor Smatrix Base T-145 thermostat provides straightforward control over your room's temperature.

6.1 Nastavení teploty

• Otáčením centrálního knoflíku ve směru hodinových ručiček zvyšte požadovanou teplotu.
• Otáčením centrálního knoflíku proti směru hodinových ručiček snížíte požadovanou teplotu.
• The digital display will show the set temperature. The backlight will activate for 10 seconds after adjustment.

6.2 Zobrazení informací

• Aktuální teplota: The main display shows the current room temperature.
• Nastavit teplotu: Briefly displayed when adjusting the dial.
• Provozní režim: An icon or text indicates if the system is currently heating or cooling.
• Setback Indicator: If the setback function is active, an indicator will show, along with the setback temperature.
• Stav baterie: Displays the status of any internal backup battery or connected sensor batteries.

6.3 Changing Temperature Units (Celsius/Fahrenheit)

Specific instructions for changing temperature units are typically found in the main Smatrix Base X-145 control module manual or accessed via a combination of button presses on the thermostat. Consult the comprehensive system manual for detailed steps.

7. Údržba

The Uponor Smatrix Base T-145 thermostat requires minimal maintenance to ensure optimal performance.

• Čištění: Periodically wipe the thermostat's exterior with a soft, dry, or slightly damp hadříkem. Nepoužívejte agresivní chemikálie, abrazivní čisticí prostředky ani nadměrnou vlhkost.
• Kontrola senzoru: If using external sensors (floor, remote, outdoor), ensure they are free from obstructions and debris that could affect their readings.
• Kontrola systému: Regularly check the overall heating/cooling system for proper operation as per the Smatrix Base X-145 control module manual.

8. Řešení problémů

If you encounter issues with your Uponor Smatrix Base T-145 thermostat, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Uponor customer support or a qualified HVAC technician.

9. Záruka a podpora

For warranty information, technical support, or service inquiries regarding your Uponor Smatrix Base T-145 Wired Room Thermostat, please refer to the documentation included with your complete Uponor Smatrix system or visit the official Uponor webUschovejte si doklad o koupi pro případ reklamace.

Výrobce: Uponor

Číslo modelu: 1086974

ASIN: B077CLZPJ8