LogiLink BP0043 Dual Monitor Desk Mount Instruction Manual

Zavedení

Welcome to your LogiLink BP0043 Dual Monitor Desk Mount. This manual provides detailed instructions for the assembly, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.

Důležité bezpečnostní informace

Please read and understand all instructions before use. Failure to follow these instructions may result in property damage, serious injury, or death.

• Nepřekračujte maximální nosnost 9 kg (19.8 liber) na paži.
• Ensure the desk surface is strong enough to support the combined weight of the mount and monitors.
• Use only with monitors within the specified size range of 13-32 inches.
• Verify VESA compatibility (75x75mm, 100x100mm) before attachment.
• Udržujte malé části mimo dosah dětí.
• If any parts are missing or damaged, do not attempt to assemble. Contact customer support.

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny.

Nastavení a instalace

Step 1: Attach the Desk Clamp

Zajistěte psací stůl třamp k okraji stolu. Ujistěte se, že je pevně utažen pro zajištění stability.

Description: This image shows the base of the monitor mount with its C-clamp mechanism, ready to be attached to a desk edge. The black knob at the bottom is used to tighten the clamp.

Step 2: Assemble the Monitor Arms

Connect the monitor arms to the main pole.

Description: This image displays the fully assembled LogiLink BP0043 dual monitor desk mount, featuring two articulating arms extending from a central pole, ready for monitor attachment.

Krok 3: Připevnění monitorů k deskám VESA

Secure your monitors to the VESA plates on each arm using the provided screws. Ensure the VESA pattern (75x75mm or 100x100mm) matches your monitor.

Description: This technical diagram illustrates the various adjustable angles and dimensions of the LogiLink BP0043 dual monitor mount, including VESA plate measurements (75x75mm, 100x100mm) and arm articulation ranges.

Step 4: Adjust Gas Spring Tension

Adjust the gas spring tension using the included Allen key to counterbalance the weight of your monitors. This allows for smooth height adjustment. Turn clockwise to increase tension for heavier monitors, counter-clockwise for lighter monitors.

Návod k obsluze

Nastavení polohy monitoru

The LogiLink BP0043 allows for extensive adjustment:

• Náklon: -90° to +90° (up/down)
• Otočný: -90° to +90° (left/right)
• Otáčení: -90° to +90° (portrait/landscape)

Gently move the monitor to your desired position. The gas spring mechanism will hold it in place once adjusted correctly.

Údržba

• Clean the mount regularly with a soft, dry cloth. Avoid abrasive cleaners.
• Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené.
• Nepromazávejte mechanismus plynové pružiny.

Odstraňování problémů

Monitor Sags or Does Not Stay in Position

This indicates the gas spring tension is too low for the monitor's weight. Increase the gas spring tension by turning the adjustment screw clockwise.

Monitor is Difficult to Move Up or Down

The gas spring tension may be too high. Decrease the gas spring tension by turning the adjustment screw counter-clockwise.

Mount is Unstable

Zajistěte stůl třamp is securely tightened to the desk. Check that the desk surface is stable and robust enough to support the mount and monitors.

Specifikace

Záruka a podpora

This LogiLink product is covered by a manufacturer's warranty. For warranty claims or technical support, please contact your local LogiLink distributor or visit the official LogiLink webwebu. Uschovejte si účtenku jako doklad o koupi.

For further assistance, please refer to the contact information provided on the LogiLink official webmísto.