Amazon Basics Dual Monitor Stand DLB112 Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics Dual Monitor Stand, model DLB112. This desk-mounted stand is designed to support two monitors, enhancing your workspace ergonomics and organization. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.

The Amazon Basics Dual Monitor Stand provides a stable and adjustable solution for two displays.

Bezpečnostní informace

• Přečtěte si všechny pokyny: Před použitím se ujistěte, že rozumíte všem montážním a provozním pokynům.
• Nosnost: Do not exceed the maximum weight capacity of 10 kg (22 lbs) per arm. Overloading can cause instability and potential damage.
• Velikost monitoru: Tento stojan je určen pro monitory s úhlopříčkou od 13 do 30 palců.
• Tloušťka stolu: Ensure your desk is between 0.8 to 3.9 inches thick for secure clamp instalace.
• Body sevření: Be aware of potential pinch points during adjustment and installation. Keep hands clear of moving parts.
• Bezpečná instalace: Verify that all screws and connections are securely tightened before placing monitors on the stand.
• Děti a domácí mazlíčci: Keep children and pets away from the stand during installation and adjustment.

Obsah balení

Before beginning installation, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Monitor Arm Body (Pole and Arms)
• Stůl Clamp Shromáždění
• VESA Plates (Detachable)
• All necessary tools and hardware (screws, washers, Allen wrenches)
• Návod k obsluze (tento dokument)

Pokyny pro nastavení

Follow these steps carefully to install your dual monitor stand.

Step 1: Prepare Your Desk

Ensure your desk surface is clean and clear. The desk clamp requires a desk thickness between 0.8 and 3.9 inches for secure attachment.

Step 2: Assemble the Desk Clamp a pól

1. Připevněte psací stůl třamp base to the main pole using the provided screws and tools.
2. Position the assembled clamp and pole on the edge of your desk.
3. Utáhněte třamp securely to the desk using the adjustment knob until the pole is stable and does not wobble.

Stůl třamp securely attaches the monitor stand pole to your desk surface.

Krok 3: Připojte desky VESA k monitorům

Each monitor requires a VESA plate to be attached to its back panel.

1. Identify the VESA mounting holes on the back of your monitors. This stand supports VESA patterns of 75x75mm and 100x100mm.
2. Align a detachable VESA plate with the mounting holes on the back of one monitor.
3. Secure the VESA plate to the monitor using the appropriate screws and washers provided. Do not overtighten.
4. Opakujte pro druhý monitor.

Připevněte desku VESA k zadní části monitoru pomocí dodaných šroubů.

Krok 4: Montáž monitorů na ramena

With the VESA plates attached to your monitors, you can now mount them onto the stand's arms.

1. Carefully slide the monitor (with the attached VESA plate) onto the VESA head of one arm.
2. Ensure the monitor is securely seated and the locking mechanism engages.
3. Repeat for the second monitor on the other arm.

Step 5: Adjust Arm Height and Position

Once both monitors are mounted, you can adjust the arms along the pole to your desired height and position.

1. Loosen the adjustment collars on the pole to move the arms up or down.
2. Position the arms so your monitors are at an ergonomic viewing height. The horizontal arm mount adjusts from 7.9 to 14.2 inches high.
3. Tighten the adjustment collars firmly to secure the arms in place.

The stand allows for height adjustment of the monitors for better posture and viewIng.

Návod k obsluze

The Amazon Basics Dual Monitor Stand offers various adjustments for optimal viewpohodlí.

Monitor rotace

Each monitor can be rotated 360 degrees, allowing for quick switching between landscape and portrait modes. Simply grasp the edges of your monitor and rotate it to the desired orientation.

Nastavení sklonu obrazovky

The screen tilt can be adjusted from -15 to +85 degrees. Loosen the tilt adjustment knob behind the VESA plate, tilt the monitor to your preferred angle, and then re-tighten the knob to secure it.

Monitors can be rotated 360 degrees and tilted from -15 to +85 degrees for flexible viewIng.

Správa kabelů

The stand features an integrated cable-management system to keep your workspace tidy. Route monitor cables through the clips or channels along the arms and down the main pole. This helps to reduce clutter and maintain a clean appearance.

Integrated cable management helps organize monitor cables for a clutter-free desk.

Údržba

• Pravidelné kontroly: Periodically check all screws, bolts, and connections to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Čištění: Clean the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by drying. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
• Mazání: Pohyblivé části nejsou potřeba mazání.

Odstraňování problémů

• Monitors are tilting or not holding position: Ensure the tilt adjustment knob behind the VESA plate is securely tightened. Some models may have an additional adjustment screw beneath a cover on the arm; check and tighten this if present.
• Stojan se kymácí: Verify that the desk clamp is fully and securely tightened to the desk surface. Ensure the desk itself is stable.
• Difficulty adjusting arm height: Loosen the adjustment collars on the main pole sufficiently before attempting to move the arms. Once at the desired height, re-tighten firmly.
• Monitory nejsou v rovině: Slight adjustments can be made by carefully rotating the VESA plate on the arm or by adjusting the height of individual arms if your model allows for independent height adjustment.

Specifikace

Záruka

This Amazon Basics Dual Monitor Stand comes with a 1letá omezená záruka from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the specified weight limits.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

Podpora

For warranty-related queries, technical assistance, or any other support needs, please contact:

• Telefon: 1800-419-2373
• E-mail: clicktech@blubirch.com
• Pracovní doba: Monday - Saturday, 10:00 AM to 6:00 PM (excluding National Holidays)

Manufacturer Contact Information: Loctek Ergonomic Technology Corp., No.588 Qihang South Road, Binhai Industrial Zone Administrative Committee, Yinzhou District, Ningbo, China.