Duluth Forge DLS-30T-1

Duluth Forge Ventless Dual Fuel Log Set - 30 Inch Split Red Oak - Thermostat Control User Manual

1. Úvod

Thank you for choosing the Duluth Forge Ventless Dual Fuel Log Set. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new log set. Please read all instructions carefully before use and retain this manual for future reference.

2. Bezpečnostní informace

VAROVÁNÍ: Nesprávná instalace, seřízení, úprava, servis nebo údržba mohou způsobit zranění nebo poškození majetku. Řiďte se touto příručkou. Potřebujete-li pomoc nebo další informace, obraťte se na kvalifikovaného instalatéra, servisní agenturu nebo dodavatele plynu.

  • Pouze pro vnitřní použití: This appliance is designed for indoor use exclusively.
  • Vent-Free Operation: This unit is vent-free, meaning it does not require an outside duct or chimney. However, proper clearance and ventilation are crucial for safe operation.
  • Senzor vyčerpání kyslíku (ODS): Equipped with a safety pilot O.D.S. that automatically shuts off the unit if oxygen levels in the room become too low.
  • Omezení nadmořské výšky: Vent-free heaters do not operate at elevations above 4,500 feet altitude.
  • Místní předpisy: This item is not for sale to residents in California. Always check your local regulations and codes before purchasing a instalace.
  • Typ paliva: Operates off Natural Gas or Liquid Propane. Ensure the correct fuel type is used and connections are secure.
  • Minimum Firebox Size: Required firebox dimensions are 20” H x 34” W in front (23” W at rear) x 15” D.

3. Vlastnosti produktu

  • Tepelný výkon: 33,000 BTU, capable of heating up to 1,300 sq. ft.
  • Dual Fuel Technology: Operates on either Natural Gas or Liquid Propane.
  • Ovládání termostatem: Automatically cycles the burner on and off to maintain a desired room temperature.
  • Realistický design: Features 9 hand-painted ceramic logs with intricate detailing for a natural appearance.
  • Ember Burner Chassis: Provides a row of flames and a glowing ember bed for a lifelike fire effect.
  • Vysoká účinnost: 99.9% efficient, contributing to heating bill savings.
  • Zapalování: Battery-assisted Piezo ignition (1 AAA battery included).
  • Bezpečnostní certifikace: ANSI Certified System and PFS Approved.

4. Co je v krabici

Your Duluth Forge Ventless Dual Fuel Log Set package includes the following components:

  • U-Burner Chassis - Qty. 1
  • Hand Painted Ceramic Logs - Qty. 9
  • Bag of Embers - Qty. 1
  • Hardware Pack - Qty. 1
Contents of the Duluth Forge log set box, including the gas burner chassis, ceramic logs, bag of embers, and hardware pack.

Image: Components included in the Duluth Forge Ventless Dual Fuel Log Set package.

5. Nastavení a instalace

Follow these steps for proper setup and installation. It is recommended to have a qualified professional perform the gas connection.

5.1 Firebox Requirements

Ensure your firebox meets the minimum size requirements:

  • Výška: 20 palce
  • Width (front): 34 inches
  • Width (rear): 23 inches
  • Hloubka: 15 palce
Diagram showing the dimensions of the Duluth Forge log set and the minimum firebox size required for installation.

Image: Dimensions of the log set and required firebox space.

5.2 Připojení plynu

The log set is designed for dual fuel operation (Natural Gas or Liquid Propane). Ensure the gas supply is turned off before making any connections. Connect the gas line to the U-burner chassis according to local codes and manufacturer instructions. A qualified technician should perform this step.

5.3 Umístění klád

Carefully arrange the 9 ceramic logs on the U-burner chassis. The logs are designed to fit together in a specific pattern to optimize flame appearance and heat distribution. Refer to the log placement diagram provided in the separate detailed instruction sheet for your specific model. Incorrect log placement can affect performance and safety.

Close-up of the Duluth Forge log set showing the arrangement of 9 hand-painted ceramic logs and glowing embers for a natural appearance.

Image: Natural appearance of the log set with hand-painted logs and embers.

5.4 Ember Material Application

Distribute the included bag of glowing ember material evenly over the burner pan, ensuring not to block any burner ports. This material enhances the realistic glowing effect of the fire.

5.5 Piezo Ignition Battery

Install the included 1 AAA battery into the electronic Piezo ignition system. This battery powers the ignition for easy startup.

Video: Duluth Forge Product Overview

Popis: Toto video poskytuje obecný přehledview of the Duluth Forge Ventless Gas Log Set, highlighting its features and aesthetic appeal.

Video: Vent Free Dual Fuel Log Set, Split Red Oak 2022

Description: This video showcases the Duluth Forge Vent Free Dual Fuel Log Set in Split Red Oak, demonstrating its operation and realistic flame.

6. Návod k obsluze

6.1 Zapalování

  1. Ujistěte se, že je zapnut přívod plynu.
  2. Locate the Piezo ignition button and the control knob on the unit.
  3. Press and hold the control knob while turning it to the PILOT position.
  4. While holding the knob, repeatedly press the Piezo ignition button until the pilot flame ignites. Continue to hold the control knob for 30-60 seconds after ignition to ensure the thermocouple is heated.
  5. Once the pilot is stable, release the control knob. If the pilot extinguishes, repeat the process.
  6. To ignite the main burner, turn the control knob from the PILOT position to the desired heat setting.
Close-up of the thermostat controls on the Duluth Forge log set, showing the control knob with multiple heat settings and the electronic Piezo ignitor button.

Image: Thermostat controls and Piezo ignition.

6.2 Ovládání termostatu

This log set features thermostat control to maintain a consistent room temperature. Once the main burner is lit, you can adjust the control knob to your preferred heat setting. The unit will automatically cycle on and off to maintain the set temperature.

6.3 Vypnutí jednotky

  1. To turn off the main burner, turn the control knob to the PILOT position. The pilot flame will remain lit.
  2. To completely shut off the unit, turn the control knob to the OFF position. It is recommended to turn off the main gas supply valve if the unit will not be used for an extended period.

7. Údržba

Pravidelná údržba zajišťuje optimální výkon a bezpečnost.

  • Čištění: Keep the log set and burner area free from dust and debris. Use a soft brush or vacuum cleaner. Do not use abrasive cleaners.
  • Log Inspection: Periodically inspect the ceramic logs for any cracks or damage. Replace damaged logs immediately. Ensure logs are correctly positioned.
  • Pilot and Burner Inspection: Annually, have a qualified service technician inspect the pilot and main burner for proper operation and cleanliness.
  • Systém ODS: Ne tamper with the Oxygen Depletion Sensor. If the unit frequently shuts off, consult a service technician.

8. Řešení problémů

If you experience issues with your log set, refer to the following common problems and solutions. For persistent issues, contact a qualified service technician.

  • Unit does not ignite: Check if the gas supply is on. Ensure the AAA battery in the Piezo ignitor is fresh and correctly installed. Verify the pilot light procedure is followed correctly.
  • Pilot light will not stay lit: Ensure the control knob is held down long enough after pilot ignition (30-60 seconds) to heat the thermocouple. Check for drafts or blockages around the pilot assembly.
  • Main burner does not ignite: Ensure the pilot light is lit. Check that the control knob is turned to a heat setting beyond the PILOT position.
  • Unit shuts off unexpectedly: This may indicate the ODS system has activated due to low oxygen levels. Ensure adequate ventilation in the room. Do not operate the unit in unventilated spaces.
  • Neobvyklé pachy: A slight odor may be present during the first few uses as manufacturing oils burn off. If strong or persistent odors occur, shut off the unit and ventilate the area, then contact a service technician.

9. Specifikace

SpecifikaceDetail
ZnačkaDuluth Forge
Název modeluDual Fuel (DLS-30T-1)
Zdroj napájeníGas Powered (Natural Gas or Liquid Propane)
Rozměry produktu15"H x 34"Š x 20"V
MateriálKeramický
Typ dokončeníVymalováno
Typ instalaceVestavěný
Tepelný výkon33,000 britských tepelných jednotek
Speciální funkceSafety Shut Off (ODS)
StylOvládání termostatem
BarvaSplit Red Oak
Typ pokojeLožnice, Obývací Pokoj
Typ ventilaceOdvzdušněte zdarma
Pokrytí topeníAž 1,300 čtverečních stop
Zahrnuté komponentyEmbers, Hardware Kit, U-Burner Chassis, Ceramic Logs
Hmotnost položky21 libry
BaterieVyžaduje 1 baterii AAA (součástí balení)
CertifikaceANSI Certified System, PFS Approved

10. Záruka a podpora

10.1 Informace o záruce

This Duluth Forge Ventless Dual Fuel Log Set comes with a Omezená záruka. Please refer to the warranty card included in your package for specific terms, conditions, and duration of coverage. Keep your proof of purchase for any warranty claims.

10.2 Zákaznická podpora

For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Duluth Forge customer support. Contact information can typically be found on the product packaging or the official Duluth Forge website. When contacting support, please have your model number (DLS-30T-1) and purchase information ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.