ECHTPower PS4 Controller Charging Station User Manual

Zavedení

This manual provides instructions for the ECHTPower PS4 Controller Charging Station, Model DC889. This device is designed to efficiently charge two Sony PlayStation 4, PS4 Slim, or PS4 Pro wireless controllers simultaneously. It incorporates fast charging technology and intelligent protection features to ensure safe and reliable operation.

Nastavení

Obsah balení

• ECHTPower PS4 Controller Charging Station (Model DC889)
• Napájecí kabel USB

Připojení nabíjecí stanice

1. Connect the provided USB power cable to the charging station's input port.

2. Connect the other end of the USB cable to a compatible power source. This can be:

• A PS4 console USB port
• A PC USB port
• A standard USB wall adapter (not included)
• A USB hub

3. Ensure the connection is secure. The charging station is equipped with anti-slip feet to maintain stability on surfaces.

Návod k obsluze

Ovladače nabíjení

To charge a controller, align the controller's EXT port with one of the charging ports on the station. Gently push the controller down until it is securely seated. The station is designed to charge two controllers simultaneously.

Stav LED indikátoru

The charging station features an LED indicator for each charging port to display the charging status:

• Červené světlo: Indicates the controller is currently charging.
• Zelené světlo: Indicates the controller is fully charged or in standby mode.

A single controller can be fully charged in approximately 2.5 hours. When charging two controllers simultaneously, the full charge time is approximately 3 hours.

Údržba

Čištění

Wipe the charging station with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.

Skladování

Store the charging station in a cool, dry place away from direct sunlight, high humidity, and extreme temperatures. Ensure the anti-slip feet are clean to maintain optimal stability.

Odstraňování problémů

Controller Not Charging

• Ensure the USB power cable is securely connected to both the charging station and the power source.
• Verify that the power source (PS4 console, PC, or USB adapter) is active and providing power.
• Check if the controller is properly seated in the charging port. The LED indicator for that port should turn red when charging begins.
• If the LED remains green, the controller may already be fully charged, or the charging station's intelligent protection system has detected an issue.

Inteligentní ochranné funkce

The charging station includes a built-in intelligent IC chip to protect your controllers during charging. This system provides:

• Ochrana proti nadproudu
• Over-Voltage Ochrana
• Over-Heated Protection
• Ochrana proti zkratu

If any of these protections are triggered, the charging process may temporarily stop to prevent damage to your controllers or the charging station. Disconnect and then reconnect the controller to attempt a reset.

Specifikace

Záruka a podpora

For warranty information, technical support, or any inquiries regarding your ECHTPower PS4 Controller Charging Station, please refer to the contact details provided with your original purchase. You may also visit the official ECHTPower webstránky pro další pomoc.

Uschovejte si prosím doklad o koupi jako doklad o koupi pro případné reklamace.