Lepro Industrial LED Desk Lamp

Zavedení

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Tento všestranný lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Před instalací a uvedením do provozu si prosím pečlivě přečtěte tento návod a uschovejte si jej pro budoucí použití.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Bezpečnostní pokyny

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Use only E27 base bulbs with a maximum wattage 40W.
• Nepoužívejte lamp s poškozeným napájecím kabelem nebo zástrčkou.
• Tento výrobek je určen pouze pro použití v interiéru. Nevystavujte vodě ani vysoké vlhkosti.
• Nechte si lamp daleko od hořlavých materiálů.
• Nepokoušejte se rozebírat nebo opravovat lamp sami. Pro servis se obraťte na kvalifikovaný personál.

Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Uživatelská příručka

Poznámka: Žárovka E27 není součástí balení a je nutné ji zakoupit samostatně.

Nastavení a instalace

Follow these steps to assemble and install your desk lamp:

1. Připojte Clamp: Bezpečně upevněte třamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Sestavte Lamp Hlava: Nainstalujte lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Opatrně vložte lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Nainstalujte žárovku: Ujistěte se, že lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp objímka. Nepřetahujte.
5. Připojení k napájení: Zapojte lamp's power cord into a suitable electrical outlet.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Obrázek: The lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Návod k obsluze

Zapnutí/vypnutí: Locate the rocker switch on the power cord. Press the switch to turn the lamp zapnuto nebo vypnuto.

Nastavení úhlu světla: Jáamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Obrázek: The lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Údržba

Čištění: K čištění lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Výměna žárovky: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp zpět dovnitř.

Odstraňování problémů

• Lamp nezapne se:
  • Zkontrolujte, zda je napájecí kabel pevně zapojen do zásuvky.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Zkontrolujte zásuvku zapojením jiného zařízení.
• Světlo bliká:
  • Ujistěte se, že je žárovka pevně zašroubovaná.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp is unstable:
  • Ujistěte se, že třamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Zkontrolujte, zda je lamp arm is properly inserted into the clamp spoj.

Specifikace

Image: Product dimensions and key features like E27 bulb base and power cord length.

Záruka a podpora

Záruka: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Zákaznická podpora: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.