1. Přesview
The LDSOLAR Sky Dream Series PWM Solar Charge Controller is designed for efficient and reliable management of solar power systems. Utilizing full digital technology and an intuitive LCD display, this controller operates in series PWM mode, optimizing the charging process for extended battery life and enhanced system performance. It is suitable for a wide range of applications, including off-grid solar home systems, traffic indicators, solar street lights, and solar garden lights.
Obrázek 1: Přední strana view of the SD Series Sky Dream Solar Charge Controller, showing the LCD screen and control buttons.
2. Klíčové vlastnosti
- 32-bit CPU: Ensures higher sampvyšší přesnost a rychlejší provozní rychlost.
- Automatický systémový objemtage Identifikace: Supports 12V/24V DC systems.
- 3-Stage PWM nabíjení: Features Bulk, Boost, and Float charging stagpro optimální stav baterie.
- Výběr typu baterie: Kompatibilní s uzavřenými, gelovými a zaplavenými bateriemi.
- Humanized LCD Display: Provides dynamic display of operation data and working status.
- Vestavěný provozní protokol: Records system working state for monitoring.
- Multi-Load Control Modes: Zahrnuje normální režim, režim senzoru a režim časovače.
- Funkce teplotní kompenzace: Upravuje parametry nabíjení na základě okolní teploty.
- Comprehensive Digital Protection: Safeguards against overcharging, over-discharging, overload, short circuit, and reverse connection.
- Max 16mm² Connectors: Accommodates robust wiring.
- 5V 1A USB Output: Vhodné pro nabíjení malých elektronických zařízení.
3. Nastavení a instalace
Správná instalace je zásadní pro bezpečný a efektivní provoz vašeho solárního regulátoru nabíjení. Pečlivě dodržujte tyto kroky:
- Příprava zapojení: Ensure all wires are of appropriate gauge for the current and length, and that all connections are clean and secure.
- Připojte baterii: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -). The controller will automatically detect the system voltage (12V nebo 24V).
- Připojte solární panel: Connect the solar panel array to the charge controller. Again, observe correct polarity. The controller will begin charging the battery.
- Připojení zátěže: Finally, connect the DC load to the charge controller's load terminals. Do not exceed the maximum rated load current.
Important: Always connect the battery first and disconnect the battery last to prevent damage to the controller.
Obrázek 2: Úhlové view of the controller showing the input/output terminals for battery, solar panel, and load connections.
4. Návod k obsluze
4.1. LCD displej
The LCD display provides real-time information about the system's status. It shows battery voltage, charging current, discharging current, battery state of charge, and various error indicators.
Figure 3: Close-up of the LCD display and control buttons for navigation and settings.
4.2. Funkce tlačítek
The controller features two buttons for navigation and setting adjustments:
- Left Button (Menu/Select): Used to cycle through display screens and enter/confirm settings.
- Right Button (Up/Adjust): Used to increase values or navigate options within settings.
4.3. Režimy řízení zátěže
The controller supports multiple load control modes to suit different application needs:
- Normální režim: Load is continuously ON or OFF based on manual setting.
- Režim senzoru: Load turns ON automatically when it gets dark and OFF when it gets light (e.g., for street lights).
- Režim časovače: Load turns ON when it gets dark and stays ON for a set number of hours.
4.4. Výběr typu baterie
To ensure optimal charging, select the correct battery type in the controller settings:
- Uzavřené: For sealed lead-acid batteries.
- Gel: For gel batteries.
- Zatopeno: For flooded (wet cell) lead-acid batteries.
Refer to the detailed instructions in the full manual for specific steps on navigating menus and adjusting settings.
5. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho solárního regulátoru nabíjení:
- Čistota: Udržujte ovladač čistý a bez prachu a nečistot. K čištění používejte suchý hadřík.
- Kontroly připojení: Pravidelně kontrolujte všechna kabelová spojení, abyste se ujistili, že jsou pevná a bez koroze. Volná spojení mohou způsobit přehřátí a špatný výkon.
- Větrání: Ensure the controller has adequate ventilation to prevent overheating. Do not block ventilation holes.
- Podmínky prostředí: Operate the controller within its specified temperature range (-20℃ to +55℃) and avoid exposure to direct sunlight or excessive moisture. The waterproof grade is IP32.
6. Řešení problémů
This section outlines common issues and their potential solutions. The controller features comprehensive digital protection functions to prevent damage.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej ovladače je vypnutý. | Baterie není připojena nebo je polarita obrácená; vybitá baterietage příliš nízké. | Zkontrolujte připojení a polaritu baterie. Ujistěte se, že je baterie nabitá.tage is above LVD (Low Voltage Disconnection) threshold. |
| Baterie se nenabíjí. | Solar panel not connected or reverse polarity; insufficient sunlight; PV input voltage příliš nízké. | Check solar panel connections and polarity. Ensure adequate sunlight. Verify PV voltage je v rámci specifikací. |
| Zatížení nefunguje. | Load over current; short circuit; battery voltage too low (LVD); load control mode setting. | Check load current and wiring for short circuits. The controller has load over current protection (auto restart every 30s). Check battery voltage. Adjust load control mode settings. |
| Přehřátí regulátoru. | Poor ventilation; excessive load or charging current. | Ensure proper airflow around the controller. Reduce load or charging current if consistently high. |
For issues not listed here, or if problems persist, please contact LDSOLAR customer support.
7. Technické specifikace
| Parametr | Value (SD2410C) |
|---|---|
| System Voltage | 12V / 24V Auto |
| PV Max Input Voltage | 55V |
| Vlastní spotřeba | ≤12 mA |
| Maximální nabíjecí proud | 10A |
| Maximální vybíjecí proud | 10A |
| Nízký objemtage Odpojení (LVD) | 11.0V ADJ (9V…12V); ×2/24V |
| Nízký objemtage Opětovné připojení (LVR) | 12.6V ADJ (11V…13.5V); ×2/24V |
| Float Voltage | 13.8V ADJ (13V…15V); ×2/24V |
| Boost Voltage | 14.4V; ×2/24V (auto boost 2 hours if battery voltage < 12.6V) |
| Baterie Over Voltage Odpojení | 16.5V; × 2/24V |
| Ochrana proti zpětnému připojení | Ano |
| Ochrana proti přetížení | Ano, automatický restart každých 30 sekund |
| Typ nabíjení | PWM |
| Teplotní kompenzace | -24 mV / °C pro 12V systém; ×2/24V |
| Pracovní teplota | -20 ℃ až +55 ℃ |
| Terminálové měřítko | 14---6 AWG (16mm²) |
| Vodotěsná třída | IP32 |
| Rozměry produktu | 190 mm × 108 mm × 41.5 mm (7.48 × 4.25 × 1.63 palce) |
| Čistá hmotnost | 450 g (15.8 uncí) |
* Please ensure the product is used under its rated power in high temperature environments.
Figure 4: Diagram illustrating the dimensions and port layout of the solar charge controller.
8. Informace o záruce
Specific warranty terms and conditions for the LDSOLAR SD Series Sky Dream PWM Solar Charge Controller are typically provided with the product packaging or on the manufacturer's official website. Please refer to these resources for detailed warranty coverage, duration, and claim procedures. Keep your proof of purchase for warranty claims.
9. Podpora
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your LDSOLAR product, please contact LDSOLAR customer support. You can typically find contact information on the product packaging, the manufacturer's official webna vašem webu nebo prostřednictvím vašeho prodejního místa.
LDSOLAR Official Webmísto: www.ldsolar.com (Poznámka: Toto je zástupný symbol URL, prosím ověřte si skutečného oficiálního webstránky pro podporu.)